
BMW 5 Series GT F07.
The coilover guide.
Shop the coiloversMany 5 Series GTs have rear air suspension. Find out what yours has before anything else, then set the height around clearance, luggage and usable suspension travel.
5 Series GT F07 history
The F07 5 Series Gran Turismo is a tall fastback built on 7 Series underpinnings. BC lists I-110 for the rear-drive car from 2010 to 2017, as a BR kit with rubber top mounts.
Many GTs have self-levelling rear air springs, and some have adaptive dampers. A coilover kit replaces those parts, so the factory specification decides the work involved.
BMW launched the 5 Series Gran Turismo in 2009 as a cross between a saloon, an estate and an SUV, with a split tailgate and frameless doors. It shared much of its structure with the F01 7 Series rather than the F10 5 Series saloon.
Rear-drive and xDrive versions were offered, and a facelift followed in 2013. It was replaced by the G32 6 Series Gran Turismo in 2017.
Because of its size and the way it is used, many GTs carry heavy loads. Tell the supplier how the car is used so the rates and ride height suit it loaded.
Start with your 5 Series GT F07.
Confirm the chassis, year and existing suspension before choosing your setup.

Rear-drive GT
BC lists I-110 for the rear-drive 5 Series GT from 2010 to 2017, with a 10 kg/mm front rate. Our catalogue does not give a rear rate for this kit, so ask BC to confirm it along with the supplied mounts.
Check my 5 Series GT
Rear air suspension
BC's listing does not say how the kit handles rear air springs. Tell the supplier if the car has them, and ask what is needed for the air system, self-levelling and warning lights before ordering.
Check my air-suspension GT
xDrive and adaptive dampers
I-110 is listed for the rear-drive car only. For an xDrive GT, or one with adaptive dampers, ask the supplier before choosing a kit.
Check my xDrive GTChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists I-110 for the rear-drive GT. Confirm the car's rear suspension and the kit's rear rate before ordering.
Read the buying advice
I-110 is a possible starting point for a rear-drive GT once the supplier has confirmed fitment, including the rear spring rate. It has 30-way rebound adjustment and height set separately from spring preload. Agree a height that keeps enough travel with the car loaded.
- Confirm rear-drive
- Confirm the rear rate
- Leave travel for loads
Replacing rear air springs with coilovers involves more than the kit. Ask the supplier before ordering.
Read the buying advice
Ask the supplier what is needed to replace the rear air springs and self-levelling, and how the car's systems will respond. Get the extra parts and wiring quoted with the kit.
- Confirm the factory air system
- Ask about extra parts
- Get the work quoted together
I-110 lists the rear-drive car. Ask before ordering for an xDrive GT or one with adaptive dampers.
Read the buying advice
Give the supplier the drivetrain and the car's damper options. Ask whether a kit is available for your car and how the factory damper wiring would be handled.
- Confirm the drivetrain
- Check the damper options
- Ask about availability
Check where the rear spring carries the load
On a standard BMW 5 Series GT, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.On a steel-spring GT, the rear spring sits separately from the damper. On an air-suspension car, the air springs, compressor and height sensors are part of one self-levelling system.
Replacing air springs with coilovers changes more than the dampers. Get the full scope of work from the supplier, confirm the kit's rear rate, and check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with rear air suspension or adaptive dampers, agree in advance how those systems will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Check the factory suspension
Confirm from the VIN data whether the car is rear-drive or xDrive and whether it has rear air springs or adaptive dampers. That decides the parts and work involved.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and the luggage and passengers the car carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 5 Series GT F07 range.
See the controls and hardware in the listed kit.
I-110 is listed for the rear-drive 5 Series GT from 2010 to 2017 under F07, as a BR kit with rubber top mounts, 30-way rebound adjustment and a 10 kg/mm front rate. Our listing does not give the rear rate, so ask BC for it. Ask BC about air suspension and xDrive cars too.
View BC Racing 5 Series GT F07 kitsFind your 5 Series GT F07 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All 5 Series GT F07 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW 5 Series Gt (RWD) (10-17) [F07]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-110
BC Racing Coilovers - BMW 5 Series Gt (RWD) (10-17) [F07]
Check the exact application
All 5 Series GT F07 kit links and part numbers
Before you order.
Identify your car
Send the engine, drivetrain, build date, VIN and options list, including rear air suspension and adaptive dampers.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any air-suspension or electronic work. Confirm delivery timing before reserving workshop time.
Questions about BMW 5 Series GT F07 coilovers.
Check the details before choosing your kit.
Can I fit coilovers to a GT with rear air suspension?
Ask the supplier first. BC's listing does not say how the kit handles rear air springs and self-levelling.
Does I-110 fit the xDrive GT?
BC lists I-110 for the rear-drive car. Ask BC before ordering for an xDrive GT.
Do F10 5 Series kits fit the GT?
No. The GT shares more with the 7 Series than with the F10 saloon, and has its own reference.
What is the rear spring rate?
Our catalogue gives the front rate as 10 kg/mm but not the rear. Ask BC to confirm it before ordering.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 5 Series GT. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the 5 Series GT's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



