
BMW 7 Series E38.
The coilover guide.
Shop the coiloversBC Racing lists I-23 for the E38 saloon in BR and RM versions. Check whether the car has rear self-levelling or electronic dampers, then set the height around clearance and travel.
7 Series E38 history
The E38 is the 7 Series BMW built from 1994 to 2001, as the 728i, 735i, 740i, 750i and diesel 725tds, 730d and 740d, in standard and long-wheelbase form. Many are now owned by enthusiasts who want a lower, tidier stance without losing the ride.
BC lists I-23 for the E38 saloon. Some cars were fitted with rear self-levelling or electronic damper control, which affects what the kit replaces. Give the supplier the engine, body length and options list before ordering.
BMW launched the E38 in 1994 to replace the E32 and built it until 2001, when the E65 took over. The range ran from six-cylinder petrol and diesel models up to the V12 750i.
Long-wheelbase L versions, rear self-levelling and Electronic Damper Control were all offered, depending on model and market. A car's original specification matters more than its badge when choosing suspension.
Age is now the bigger factor on most E38s. Have the bushes, top mounts and rear subframe mounts inspected before fitting new suspension, and budget for any worn parts found.
Start with your 7 Series E38.
Confirm the chassis, year and existing suspension before choosing your setup.

Standard saloon
BC lists I-23 for the 1994-2001 7 Series saloon, with default rates of 5.5 kg/mm front and 4.5 kg/mm rear. Give the supplier the engine, build date and whether the car is a long-wheelbase L, and ask it to confirm the kit and supplied mounts.
Check my E38
Self-levelling and EDC cars
BC's listing does not say how the kit handles rear self-levelling or Electronic Damper Control. Tell the supplier if the car has either, and ask what is needed for the warning lights and any rear levelling parts.
Check my self-levelling E38
Modified and V12 cars
The RM version uses an inverted front damper. Tell the supplier about the engine, wheels and any previous suspension work, and ask whether the standard rates suit the heavier V12 or a car that sees faster driving.
Check my modified E38Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists I-23 BR RA with a pillowball front and rubber rear mount. Have the application checked before ordering.
Read the buying advice
The BR RA version is a possible starting point for a road E38 once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Agree a modest height that leaves travel for bumps; a big saloon rides badly if it runs out of suspension.
- Confirm the engine and body length
- Leave room for suspension movement
- Include alignment
A car with rear self-levelling or EDC needs more than the kit. Ask the supplier before ordering.
Read the buying advice
Ask the supplier what is needed to replace the rear levelling or electronic dampers, and how the car's warning lights will behave. Get any extra parts and wiring quoted with the kit so the fitting is done in one visit.
- Confirm the factory options
- Ask about extra parts
- Get the work quoted together
BC's RM MA version has an inverted front damper and rubber rear mount. Confirm it suits your car and engine.
Read the buying advice
The RM version is listed at a higher price than BR. Tell the supplier about the engine, wheels and how the car is driven, and agree spring rates and starting settings for that use.
- Confirm the RM application
- Give engine and wheel details
- Agree rates and settings
Check where the rear spring carries the load
On a standard BMW E38, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The E38's rear spring sits separately from the damper on a multi-link axle. BC lists 5.5 kg/mm front and 4.5 kg/mm rear; because the springs sit in different positions, those figures are not a direct comparison of stiffness at the wheel.
Ask BC which rear arrangement the kit uses and what it supplies at the spring seat. On a car with rear self-levelling, confirm how the kit replaces that system. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with self-levelling or EDC, agree in advance how those parts will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Inspect the bushes and mounts
Have the workshop inspect the front thrust-arm bushes, top mounts, rear subframe mounts and rear arm bushes. Replace worn parts before fitting so the new suspension is not hiding old faults.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 7 Series E38 range.
See the controls and hardware in the listed kit.
I-23 is listed for the 1994-2001 7 Series saloon under E38, as BR RA with a pillowball front and rubber rear or RM MA with an inverted front. BC gives default rates of 5.5 kg/mm front and 4.5 kg/mm rear. Ask BC about long-wheelbase cars, self-levelling and EDC.
View BC Racing 7 Series E38 kitsFind your 7 Series E38 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All 7 Series E38 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW 7 Series Sedan (94-01) [E38]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-23
BC Racing Coilovers - BMW 7 Series Sedan (94-01) [E38]
Check the exact application
All 7 Series E38 kit links and part numbers
Before you order.
Identify your car
Send the engine, body length, build date, VIN and options list, including rear self-levelling and EDC.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any work on self-levelling or electronic dampers. Confirm delivery timing before reserving workshop time.
Questions about BMW 7 Series E38 coilovers.
Check the details before choosing your kit.
Does I-23 fit the long-wheelbase E38?
BC's listing names the 7 Series saloon. Ask BC to confirm a long-wheelbase L car before ordering.
What if my E38 has rear self-levelling?
Tell the supplier first. BC's listing does not say how the kit handles self-levelling, which may need extra parts.
Do E65 kits fit the E38?
No. The E65 that replaced the E38 in 2001 has its own BC reference, I-38.
What is the difference between BR and RM?
BR RA has a pillowball front mount. RM MA uses an inverted front damper. Both have a rubber rear mount and the same listed rates.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every E38. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the E38's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



