Dark blue BMW 8 Series, lightly lowered on dark wheels beside a Highland loch

BMW 8 Series G15/G16.
The coilover guide.

Shop the coilovers

BC lists four separate 8 Series references, split by body and drivetrain. Pick the one that matches your car first, then set the height around tyre clearance and usable suspension travel.

Which 8 Series G15/G16 do you have?4 listed kits · 1 brandReviewed 21 November 2026

8 Series G15 and G16 history

The current 8 Series comes as the G15 coupe, the G14 convertible and the G16 four-door Gran Coupe, in rear-drive and xDrive forms. BC Racing lists separate kits for the rear-drive coupe, the M850i xDrive coupe, the rear-drive 840i Gran Coupe and the all-wheel-drive Gran Coupe.

No convertible kit is listed here, and the M8 is a separate car. Give the supplier the body, engine, drivetrain and options list before comparing prices.

BMW revived the 8 Series name in 2018 with the G15 coupe, followed by the G14 convertible and, in 2019, the G16 Gran Coupe with four doors and a longer wheelbase. The range covers the 840i and 840d in rear-drive or xDrive form and the M850i xDrive.

Many cars have Adaptive M suspension with electronically controlled dampers, and some have Integral Active Steering. Tell the supplier exactly what the car has, and ask how the kit handles the factory damper system before ordering.

Because the coupe and Gran Coupe differ in length and weight, BC lists them separately even where the engine is the same. Order against the body and drivetrain of your car rather than the 8 Series name alone.

Start with your 8 Series G15/G16.

Confirm the chassis, year and existing suspension before choosing your setup.

White BMW 8 Series on silver wheels parked beside a hedgerow

G15 coupe

BC lists I-122 for the rear-drive 8 Coupe from 2019 and I-112 for the M850i xDrive coupe. Both are BR kits with rubber top mounts and default rates of 10 kg/mm front and 5 kg/mm rear. Confirm the drivetrain and engine with the supplier.

Check my 8 Series coupe
Grey BMW 8 Series Gran Coupe on black wheels outside a modern workshop

G16 Gran Coupe

BC lists I-104 for the rear-drive 840i Gran Coupe and I-123 for the all-wheel-drive Gran Coupe. Give the supplier the engine and drivetrain, and ask it to confirm the reference and supplied mounts for that car.

Check my Gran Coupe
Black BMW M850i coupe on gunmetal wheels in front of closed circuit pit garages

M850i and electronic dampers

The M850i xDrive coupe has its own BC reference. Ask BC how its kits treat a car with Adaptive M suspension, including the warning lights and driving modes. The G14 convertible and the M8 are not covered by these listings.

Check my M850i

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing I-122, subject to an application check

BC lists I-122 for the rear-drive G15 coupe with rubber top mounts. Have the application and factory dampers checked first.

Read the buying advice

The I-122 BR kit is a possible starting point for a rear-drive coupe once the supplier has confirmed fitment. Height adjusts separately from spring preload. Agree a height that clears your wheels and leaves room for the suspension to compress on the roads you use.

  • Confirm rear-drive
  • Ask about the factory dampers
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing I-123, subject to an application check

BC lists I-123 for the all-wheel-drive G16 Gran Coupe. Confirm the engine and options before ordering.

Read the buying advice

The Gran Coupe is longer than the coupe, so it has its own references. I-123 covers the all-wheel-drive car and I-104 the rear-drive 840i. Ask the supplier to confirm the springs and mounts for your engine, and budget for alignment at the final height.

  • Confirm Gran Coupe xDrive
  • Check the engine
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing I-112, subject to an application check

BC lists I-112 for the M850i xDrive coupe. Confirm how it replaces the factory dampers before ordering.

Read the buying advice

I-112 has 30-way rebound adjustment, so you can start in the middle and work firmer for track days. Tell the supplier about your tyres and circuits, and agree what happens to the Adaptive M system and warning lights before booking fitting.

  • Confirm M850i xDrive
  • Agree the electronic damper plan
  • Start with mid settings
View current configurations

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW 8 Series, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

BC's 8 Series kits list default rates of 10 kg/mm front and 5 kg/mm rear. The rear spring sits in a different position on the suspension from the front, so the two figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Agree any rate changes with the supplier for that layout, and check the alignment at the final ride height.

Read about ride height and spring preload
Silver BMW 8 Series standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with Adaptive M suspension, agree in advance how the factory damper wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check the body, drivetrain and dampers

Confirm from the VIN data whether the car is a coupe or Gran Coupe, rear-drive or xDrive, and whether it has Adaptive M suspension. Those answers decide which BC reference applies.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current 8 Series G15/G16 range.

Compare the controls and hardware included in each range.

BC Racing

BC lists four 8 Series references: I-122 for the rear-drive coupe, I-112 for the M850i xDrive coupe, I-104 for the rear-drive 840i Gran Coupe and I-123 for the all-wheel-drive Gran Coupe. All are BR kits with rubber top mounts, 30-way rebound adjustment and default rates of 10 kg/mm front and 5 kg/mm rear. Ask BC how they treat electronic dampers.

View BC Racing 8 Series G15/G16 kits

Find your 8 Series G15/G16 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All 8 Series G15/G16 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All 8 Series G15/G16 kit links and part numbers

Before you order.

  1. Identify your car

    Send the body, engine, drivetrain, build date, VIN and options list, including any Adaptive M suspension.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including any electronic damper work. Confirm delivery timing before reserving workshop time.

Questions about BMW 8 Series G15/G16 coilovers.

Check the details before choosing your kit.

Is there a kit for the 8 Series convertible?

Not in these listings. BC's references cover the G15 coupe and G16 Gran Coupe. Ask the supplier about a G14 convertible before ordering anything.

Do 8 Series kits fit the M8?

No. The M8 is a separate car with its own suspension. These references cover the 840i, 840d and M850i.

Do the same kits fit the coupe and Gran Coupe?

No. BC lists separate references for each body and drivetrain. Order the one for your car.

What happens to Adaptive M suspension?

A kit with manually adjusted dampers replaces it. Ask BC how its kit handles the factory wiring, warning lights and driving modes.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 8 Series. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the 8 Series's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.