Blue BMW ActiveHybrid X6, lightly lowered on dark wheels in a Cotswolds lay-by

BMW ActiveHybrid X6 E72.
The coilover guide.

Shop the coilovers

BC Racing lists I-129 for the ActiveHybrid X6. It is a rare, heavy car with its own suspension needs, so confirm the exact car and factory set-up before ordering.

Which ActiveHybrid X6 E72 do you have?1 listed kit · 1 brandReviewed 21 November 2026

ActiveHybrid X6 E72 history

The E72 ActiveHybrid X6 was BMW's first full hybrid, built from 2009 to 2011 with a twin-turbo V8 and two electric motors. It is far rarer than the ordinary E71 X6, which has its own guide.

BC lists I-129 for the hybrid in BR RS form with rubber top mounts and default rates of 10 kg/mm front and 11 kg/mm rear. Give the supplier the VIN to confirm it is an E72.

BMW introduced the ActiveHybrid X6 in 2009 as a version of the first-generation X6 with a hybrid system developed with other manufacturers. It combined the 4.4-litre twin-turbo V8 with two electric motors and a battery pack.

It was built in small numbers until 2011 and sold mainly in left-hand-drive markets. The battery adds weight, and the car's factory suspension and options need checking before any kit is ordered.

The ordinary E71 X6 has its own guide and BC reference. Do not assume an E71 kit suits the hybrid.

Start with your ActiveHybrid X6 E72.

Confirm the chassis, year and existing suspension before choosing your setup.

White BMW ActiveHybrid X6 on silver wheels on a village street

ActiveHybrid X6

BC lists I-129 for the 2008-2014 X6 hybrid under E72, as a BR kit with rubber top mounts. Give the supplier the VIN, build date and options list, and ask it to confirm the kit and supplied mounts.

Check my ActiveHybrid X6
Silver BMW ActiveHybrid X6 on black wheels on a gravel drive

Factory suspension options

Tell the supplier what suspension the car has, including any self-levelling or adaptive dampers. Ask how the kit handles those systems and the warning lights.

Check my X6 options
Black BMW X6 E72 on gunmetal wheels outside a modern workshop

Wheels and clearance

Give the supplier the wheel and tyre sizes. At the intended height, check clearance and keep enough travel for a heavy car on rough roads.

Check my X6 wheels

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing I-129, subject to an application check

BC lists I-129 BR RS with rubber top mounts. Confirm the car is an E72 before ordering.

Read the buying advice

I-129 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest so a heavy car keeps enough travel for bumps.

  • Confirm E72 by VIN
  • Leave room for movement
  • Include alignment
View current configurations

Ask how the kit treats the car's factory suspension systems before ordering.

Read the buying advice

Give the supplier the options list and ask how the kit handles any self-levelling, adaptive dampers or active anti-roll systems. Get any extra parts and wiring quoted with the kit.

  • Check the options
  • Ask about extra parts
  • Get the work quoted together
Discuss my ActiveHybrid X6

The hybrid system's high-voltage parts need a workshop that knows how to work around them.

Read the buying advice

Ask the workshop whether it is familiar with high-voltage hybrid cars, and confirm the correct lifting points. Book fitting and alignment together once the parts are confirmed.

  • Check hybrid experience
  • Confirm lifting points
  • Book fitting and alignment
Discuss fitting my ActiveHybrid X6

Understand the rates before changing them

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW ActiveHybrid X6, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

BC lists 10 kg/mm front and 11 kg/mm rear for the hybrid, reflecting its weight. The front and rear springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Check the alignment at the final ride height.

Read about ride height and spring preload
Grey BMW X6 E72 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with high-voltage hybrid cars. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the car

Check from the VIN that the car is an ActiveHybrid X6 E72 and not an E71, and record its factory suspension options.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current ActiveHybrid X6 E72 range.

See the controls and hardware in the listed kit.

BC Racing

I-129 is listed for the X6 hybrid under E72, in BR RS form with rubber top mounts, 30-way rebound adjustment and default rates of 10 kg/mm front and 11 kg/mm rear. Ask BC about the car's factory suspension systems.

View BC Racing ActiveHybrid X6 E72 kits

Find your ActiveHybrid X6 E72 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All ActiveHybrid X6 E72 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All ActiveHybrid X6 E72 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, build date and options list, including any self-levelling or adaptive dampers.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about BMW ActiveHybrid X6 E72 coilovers.

Check the details before choosing your kit.

Does I-129 fit an ordinary E71 X6?

No. I-129 is listed for the hybrid E72. The E71 has its own guide and reference.

Do I need a special workshop?

Use one familiar with high-voltage hybrid cars and the correct lifting points.

Why are the rates so high?

The hybrid system adds weight, and BC's rates reflect that. Ask BC before changing them.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every ActiveHybrid X6. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the ActiveHybrid X6's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.