Silver BMW i8 coupe with blue accents, lightly lowered on dark wheels beside a Highland loch

BMW i8 I12/I15.
The coilover guide.

Shop the coilovers

BC Racing lists one kit for the i8 coupe and roadster. Plan the height around the car's low nose and underbody, and use a workshop that knows hybrid cars.

Which i8 I12/I15 do you have?1 listed kit · 1 brandReviewed 21 November 2026

BMW i8 history

The i8 is BMW's plug-in hybrid sports car, with a carbon-fibre passenger cell, a turbocharged three-cylinder engine driving the rear wheels and an electric motor driving the front. BC lists I-94 for the I12 coupe and I15 roadster.

It already sits low, with a long front overhang. Plan the ride height around kerbs, speed humps and driveways, and use a workshop familiar with high-voltage cars.

BMW launched the i8 coupe in 2014, with butterfly doors and a carbon-fibre-reinforced plastic passenger cell on an aluminium chassis. The I15 roadster joined in 2018, and production ended in 2020.

The hybrid system drives all four wheels: the engine at the rear and an electric motor at the front, with the battery running through the centre of the car.

Because it is low and wide, the i8's underbody and front splitter are easy to damage. A modest drop with enough travel suits it better than a large one.

Start with your i8 I12/I15.

Confirm the chassis, year and existing suspension before choosing your setup.

White BMW i8 coupe on silver wheels on a country lane

i8 coupe

BC lists I-94 for the i8 from 2014 to 2020, in BR RN form with default rates of 10 kg/mm front and 5 kg/mm rear. Give the supplier the build date and wheel size, and ask it to confirm the kit and mounts.

Check my i8 coupe
Copper BMW i8 roadster with its roof folded, on black wheels outside a modern workshop

i8 roadster

I-94 lists both I12 and I15. The roadster is a little heavier, so ask the supplier whether the standard rates suit it.

Check my i8 roadster
Grey BMW i8 coupe on gunmetal wheels in front of closed circuit pit garages

Track days

Tell the supplier about the tyres, circuits and how often the car runs. Ask about rates and starting settings, and how much ground clearance the car will have at the intended height.

Check my track i8

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing I-94, subject to an application check

BC lists I-94 BR RN for the i8 coupe and roadster. Have the application checked before ordering.

Read the buying advice

I-94 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest so the front overhang clears ramps and humps.

  • Confirm coupe or roadster
  • Keep ground clearance
  • Include alignment
View current configurations

Ask whether BC's standard rates suit the heavier roadster.

Read the buying advice

Give the supplier the body and how you use the car. Ask whether the 10 kg/mm front and 5 kg/mm rear rates suit the roadster, and set the height with the car in its normal state.

  • Confirm the roadster
  • Ask about rates
  • Check the height
Discuss my i8 roadster

Start in the middle of the damping range and agree rates with the supplier for your tyres.

Read the buying advice

Tell the supplier about your tyres and circuits, and agree rates and starting settings. Check ground clearance at the intended height, and keep enough travel for kerbs.

  • Give tyre details
  • Start mid-range
  • Check ground clearance
Discuss my track i8

Understand the rates before changing them

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW i8, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

BC lists 10 kg/mm front and 5 kg/mm rear for the i8. The front and rear springs sit in different positions on the suspension, so the figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Agree any rate changes with the supplier, and check the alignment at the final ride height.

Read about ride height and spring preload
Black BMW i8 coupe standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with high-voltage hybrid cars and the i8's lifting points. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check ground clearance

Measure the front overhang and underbody clearance at the intended height, and check the car can clear your driveway, ramps and humps before settling on it.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current i8 I12/I15 range.

See the controls and hardware in the listed kit.

BC Racing

I-94 is listed for the i8 from 2014 to 2020 under I12/I15, in BR RN form with no front top mount and a rubber rear. BC gives default rates of 10 kg/mm front and 5 kg/mm rear and 30-way rebound adjustment. Ask BC about the roadster's rates.

View BC Racing i8 I12/I15 kits

Find your i8 I12/I15 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All i8 I12/I15 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All i8 I12/I15 kit links and part numbers

Before you order.

  1. Identify your car

    Send the body, build date, VIN and wheel size, and how you use the car.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about BMW i8 I12/I15 coilovers.

Check the details before choosing your kit.

Does I-94 fit the coupe and roadster?

BC lists I-94 for both the I12 coupe and I15 roadster. Ask whether the standard rates suit the roadster.

How low can an i8 go?

It already sits low with a long front overhang. Keep the drop modest and check clearance for ramps, humps and driveways.

Does any workshop work on an i8?

Use a workshop familiar with high-voltage hybrid cars and the i8's lifting points.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every i8. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the i8's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.