Green BMW M4 Convertible G83 with its soft-top folded down, on bronze wheels in a Cotswolds lay-by

BMW M4 Convertible G83.
The coilover guide.

Shop the coilovers

Order against the convertible's drivetrain first: AST and MOTON keep separate rear-drive and xDrive references. Then plan how the factory electronic dampers will be replaced.

Which M4 Convertible G83 do you have?16 listed kits · 2 brandsReviewed 21 November 2026

M4 Convertible G83 history

The G83 is the soft-top version of the current M4. AST and MOTON list it within references shared with the M3 G80, M3 Touring and M4 coupe, split by drivetrain. Read the convertible row of each table, and give the supplier the VIN before comparing prices.

AST's and MOTON's application notes say that a car with EDC needs a delete kit ordered separately. Agree that part, and what it means for the driving modes, before booking fitting.

BMW introduced the G83 in 2021 as the M4 Competition Convertible with M xDrive, using the same S58 straight-six as the coupe. It returned the M4 Convertible to a fabric roof, after the folding metal roof of the F83 before it.

BMW describes Adaptive M suspension with electronically controlled dampers on the current M4. A coilover kit with manually adjusted dampers replaces that system, which is why AST and MOTON tell owners to order an EDC delete kit separately.

The convertible shares its suspension references with the M3 and M4 coupe in these tables, but it is still its own application. Check the convertible row, the drivetrain and the build date, and keep the M4 CS and CSL out of the comparison.

Start with your M4 Convertible G83.

Match the model year, drivetrain and body style before comparing brands.

Grey BMW M4 Convertible with its black soft-top raised, parked beside a hedgerow on a country lane

M xDrive

AST lists ACU-B2114SD, ACT-B2114SD, ACC-B2115SD, RIV-B2115SD and RAC-B2115SD for the M4 Convertible xDrive. MOTON lists M 505 187SD, 188SD and 189SD. Give the supplier the VIN and build date, and ask it to confirm the reference and supplied mounts.

Check my M4 Convertible xDrive
Blue BMW M4 Convertible with its roof down and quad exhausts, parked outside a modern workshop

Replacing the electronic dampers

Both AST's and MOTON's notes say to order an EDC delete kit separately for a car with EDC. Ask the supplier which delete kit suits your car, what happens to the warning lights and driving modes, and whether it affects anything else on the car.

Check the EDC delete for my M4
White BMW M4 Convertible with its soft-top raised, parked in front of closed circuit pit garages

Rear-drive rows and track use

AST and MOTON also list rear-drive G83 references, including ACU-B2110SD, RIV-B2112SD and M 505 184SD. Confirm which drivetrain your car has before choosing. For circuit days, tell the supplier about the tyres, circuits and how often the car runs.

Check my track M4 Convertible

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for the EDC delete kit, fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · AST ACU-B2114SD, subject to an exact-car check

AST describes ACU-B2114SD as an xDrive NCO kit, keeping the rear spring separate from the damper. Check the convertible row and EDC delete before ordering.

Read the buying advice

ACU-B2114SD is an inverted 5100 Street kit with rebound and ride-height adjustment. Keeping the separate rear spring follows the factory layout. Agree a height that leaves room for the suspension to compress, and budget for the EDC delete kit and alignment.

  • Confirm M xDrive
  • Order the EDC delete kit
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · MOTON 1-Way Clubracer, subject to an exact-car check

MOTON lists the M 505 187SD 1-Way Clubracer for the xDrive G83, with springs and drop links. Confirm the application and EDC delete first.

Read the buying advice

The 1-Way Clubracer has rebound and ride-height adjustment, which keeps setup simple for a car used mostly on the road. Ask MOTON's supplier to confirm the springs, mounts and rear layout for the convertible, and agree starting settings for your tyres.

  • Confirm the xDrive application
  • Agree starting settings
  • Confirm delivery timing
View current configurations
Selected configurationSee optionsinc. VAT · AST RIV-B2115SD, subject to an exact-car check

AST lists RIV-B2115SD, a 5200 2-way kit with remote reservoirs, for the xDrive G83. Confirm the rear layout and reservoir mounting.

Read the buying advice

The 5200 kit adds separate compression adjustment on remote reservoirs, useful when the same car runs road and circuit tyres. Agree where the reservoirs will mount and how you will reach the adjusters. Confirm the rear layout and delivery timing before booking fitting.

  • Confirm the rear layout
  • Plan reservoir mounting
  • Agree settings and delivery timing
View current configurations

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW M4 Convertible, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The factory rear spring sits in its own seats beside the damper. AST describes ACU-B2114SD, ACT-B2110SD and ACT-B2114SD as NCO, which keeps that separate spring, with the height adjusted at the spring seat.

AST describes ACC-B2112SD and ACC-B2115SD as TCO, a true rear coilover with front and rear top mounts. The spring then sits around the damper, so the damper mounts carry the spring load too. ACU-B2110SD's set description names a different car and a rear coilover, so confirm its contents by reference.

Spring rates only compare like with like. A rear spring mounted away from the damper acts at a different point on the suspension, so its rate does not translate directly into stiffness at the wheel. Agree rates with the supplier for the layout you are buying.

Read about ride height and spring preload
Red BMW M4 Convertible with its roof down, standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference, the EDC delete kit and the car's options list before it orders fitting parts. Agree how the factory damper wiring will be handled and what the car will show afterwards. Ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the drivetrain and EDC

Check from the VIN data that the car is M xDrive and has EDC, and give the supplier those details. The reference, delete kit and setup all depend on them.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current M4 Convertible G83 range.

Compare the controls and hardware included in each range.

AST

AST lists separate rear-drive and xDrive G83 references across 5100 Street, Street Performance and Clubracing, 5200 two-way and 5300 three-way kits. The xDrive references end in 2114 or 2115. Its notes say to order an EDC delete kit separately. ACU-B2110SD's set description names the M2 and a rear coilover, so confirm what it contains before choosing it.

View AST M4 Convertible G83 kits

MOTON

MOTON lists one-, two- and three-way kits for the G83: M 505 184SD, 185SD and 186SD for rear drive and 187SD, 188SD and 189SD for xDrive. The one-way kits include springs and drop links. MOTON's notes also say to order an EDC delete kit separately. Confirm the rear layout and reservoir positions with the supplier.

View MOTON M4 Convertible G83 kits

Find your M4 Convertible G83 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

16 listings

Selected application: All M4 Convertible G83 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 16 shown
All M4 Convertible G83 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, build date and options list, including the drivetrain, EDC and any previous suspension changes.

  2. Match the kit

    Confirm the full kit reference for your car and the convertible row of the shared application table.

  3. Check what’s included

    Order the EDC delete kit the manufacturer specifies, and ask what it changes on the car.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including the EDC work. Confirm delivery timing before reserving workshop time.

Questions about BMW M4 Convertible G83 coilovers.

Check the details before choosing your kit.

Do M4 coupe G82 kits fit the G83 convertible?

Several AST and MOTON references list both, each with its own row. That comes from their application tables; it does not make every G82 kit suitable. Order against the G83 row and drivetrain.

Do I need an EDC delete kit?

AST's and MOTON's notes say a car with EDC needs a delete kit ordered separately. Ask the supplier which one suits your car and what it changes.

Why are there rear-drive and xDrive references?

AST and MOTON keep separate references for each drivetrain across the M3 and M4. Check which your car has from the VIN data before ordering.

What do NCO and TCO mean in AST descriptions?

NCO keeps the rear spring separate from the damper, as on the standard car. TCO is a true rear coilover, with the spring around the damper. Confirm the layout and mounting work with AST and the fitter.

Do F83 M4 Convertible kits fit the G83?

No. The F83 is the earlier generation with a folding metal roof and different suspension. Use the G83 application for a 2021-on car.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. Check the alignment at the final height.

When should I book fitting?

The AST and MOTON options are listed on backorder. Agree the specification, the EDC delete kit and delivery timing first, then book fitting and alignment.

Let’s talk suspension.

Send the M4 Convertible's VIN, build date, options list and current suspension details. Include the kit reference and EDC delete you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.