Blue first-generation BMW X1 E84 with upgraded wheels and a moderate lowered stance beside a country road

BMW X1 E84.
The coilover guide.

Shop the coilovers

BC Racing lists different kits for the rear-wheel-drive E84 and xDrive. Establish which X1 you have before choosing between BR and RM, then plan the height around your wheels and the load you usually carry.

Which X1 E84 do you have?2 listed kits · 1 brandReviewed 19 November 2026

The first X1 and its two drivetrains

An E84 used for commuting and family trips still needs room for its tyres when the rear suspension compresses. Give the fitter the wheel widths, offsets and tyre sizes, including any spacers, and explain how you use the boot and rear seats.

The current BC references are I-40 for rear-wheel drive and I-72 for AWD. Each has BR RA and RM MA configurations in this shop. Keep that drivetrain distinction when comparing the controls and supplied mounts. The later F48 X1 and U11 need their own applications.

BMW introduced the X1 in Europe in 2009 with rear-wheel-drive and xDrive versions. The E84 has a double-joint spring-strut front axle and a five-link rear axle. BMW's technical material distinguishes the front hardware of sDrive and xDrive cars, so a common body shape does not make their suspension references interchangeable.

The UK update went on sale in July 2012 with revised exterior and cabin details, changes to the diesel range and new Sport and xLine versions alongside SE and M Sport. Record the engine and build details when checking a kit; a trim badge or first-registration year leaves some of that information out.

BMW replaced the E84 with the second-generation X1 in 2015. The F48 has a different chassis and front suspension design and needs its own suspension application.

Start with your X1 E84.

Confirm the chassis, year and existing suspension before choosing your setup.

Grey BMW X1 E84 with upgraded wheels parked beside a quiet road

E84 sDrive with rear-wheel drive

BC's I-40 reference names the 2009-2015 rear-wheel-drive E84. The shop has BR RA and RM MA options. Include your engine specification, build details and axle ratings in your enquiry, plus details of any suspension changes. Confirm the chosen mounts and complete rear parts before ordering.

Check my rear-wheel-drive E84
Silver BMW X1 E84 on upgraded wheels outside a workshop with a mechanic holding a clipboard

E84 xDrive with all-wheel drive

I-72 is BC's separate 2009-2015 AWD E84 application, also listed here in BR RA and RM MA configurations. Use the actual car's drivetrain and build specification to check it. An xDrive badge on an F48 or U11 does not identify an E84, and the I-40 rear-wheel-drive kit is a different reference.

Check my xDrive E84

Choose around your E84's normal use

Match the drivetrain first. Then compare the controls you will use and agree a height that leaves clearance with your usual passengers and luggage aboard.

Selected configurationSee optionsinc. VAT · I-40 BR RA · confirm your RWD application

Discuss I-40 BR RA once the rear-wheel-drive application is confirmed for your car.

Read the buying advice

The listed RA configuration has a pillowball front mount and a rubber rear mount. BR's single damping control changes compression and rebound together. Include the condition of the mounts and bushes in the fitting quote, and explain how much road noise and firmness you are willing to live with. Choose a height that leaves room for steering and suspension movement.

  • Confirm I-40 for rear-wheel drive
  • Check the supplied and retained mounts
  • Allow for the car's normal load
View current configurations
Selected configurationSee optionsinc. VAT · I-72 BR RA · confirm your AWD application

For an AWD E84, discuss I-72 BR RA with the fitter before deciding whether RM suits the build.

Read the buying advice

Give the workshop the wheel and tyre details for both uses, especially if you change wheels for a circuit day. BR has one combined damping adjustment; RM's inverted front construction is a separate hardware choice. Ask how the selected RM MA kit's mounts and rear parts compare with the BR RA package for your car.

  • Use the I-72 AWD reference
  • Check both wheel and tyre packages
  • Agree the height before final alignment
View current configurations

Discuss the spring and damper specification with the builder using the actual tyres, running weight and intended events.

Read the buying advice

An E84 carrying its full interior and driven home after an event has different requirements from a substantially altered project. Explain any brake, seating or other chassis changes and who will set up the dampers. Check usable travel and tyre clearance at the agreed height, then plan inspections and damper servicing. Keep the RWD or AWD application attached to the specification throughout.

  • Use the completed car's weight and tyres
  • Agree the setup and inspection work
  • Keep the exact drivetrain application
Discuss my E84 circuit project

The E84 rear spring sits beside the damper

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

On a standard BMW X1 E84, the rear spring and damper are mounted separately.

Component layout only. Mounts, dimensions and adjusters vary by kit.

BMW describes a separate rear spring and damper arrangement on the E84, with a five-link HA5 rear axle on both sDrive and xDrive. The compact drawing identifies that layout. It does not show the dimensions, mounting details or parts supplied with a particular replacement kit.

Have the fitter confirm the complete rear package for I-40 or I-72, including the springs, seats, dampers and mounts that are supplied or retained. Establish how the ordered kit sets rear ride height. An adjustment method described for a front coilover should not be applied to the separate rear spring assembly.

Check rear clearance with the load you normally carry. The spring seats, supporting arms and bushes also deserve inspection before height setting and alignment. Follow the selected kit's instructions for adjustment and tightening.

Understand height and spring preload
Silver BMW X1 E84 resting on its wheels beside a mechanic with a clipboard outside a workshop

Include the supporting parts in the fitting quote

Have the workshop inspect the current dampers and spring seats, then the mounts, joints and bushes. Settle the ordered kit's complete parts list before taking the car apart, including anything that must be reused. Tell the fitter about previous suspension work and any equipment that needs checking after a height change.

Provide wheel widths, offsets, tyre sizes and spacer details. The quote should cover clearance checks through steering and suspension movement, height setting and final alignment. Agree any follow-up checks with the workshop.

Wheels and tyres

Choose the tyre and wheel package before committing to a low setting. Give the fitter the actual widths and offsets, including spacers. Check clearance to the suspension, arch and liner through steering and suspension movement.

Mounts and bushes

A new damper kit will not renew the other suspension joints. Include worn mounts, spring seats and bushes in the inspection so their condition is considered before setup. Confirm which mounts come with the RA or MA option you order.

Height and alignment

Agree a finished height for the roads and loads you use. Have the suspension settled and the clearance checked before final alignment. Follow the exact kit's instructions rather than copying another owner's number of turns or damper clicks.

Circuit preparation

Discuss the tyres, brakes and inspection work with the builder if circuit days are part of the plan. Record the settings you use and change them methodically. Give the builder the car's running weight and details of planned changes when agreeing the spring and damper specification.

The current X1 E84 range.

Compare the controls and hardware included in each range.

BC Racing

I-40 covers the named rear-wheel-drive E84 application and I-72 the AWD application. Both shop listings have BR RA and RM MA choices. BR and RM each use one adjustment for compression and rebound together; RM has inverted front construction. Confirm the exact ordered spring specification, mounts and rear package.

View BC Racing X1 E84 kits

Find your X1 E84 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All X1 E84 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X1 E84 kit links and part numbers

Before you order.

  1. Identify your car

    Identify the car as an E84 and confirm rear-wheel drive or xDrive, with the engine and build details available.

  2. Match the kit

    Match I-40 or I-72 to that application, then confirm the exact RA or MA configuration and the complete supplied parts.

  3. Check what’s included

    Record the current suspension and any previous changes, including parts the fitter expects to retain or renew.

  4. Check your modifications

    Supply wheel widths, offsets, tyre sizes and spacer details, with the proposed height and normal passenger or luggage load.

  5. Plan fitting

    Include fitting, clearance checks, height setting and final alignment in the budget, and check current availability and delivery when ordering.

Questions about BMW X1 E84 coilovers.

Check the details before choosing your kit.

Which BC Racing reference is for my E84?

The current manufacturer table separates I-40 for the 2009-2015 rear-wheel-drive E84 and I-72 for the AWD E84. Check the actual drivetrain, engine and build details before choosing the exact configuration. A later F48 or U11 needs a separate application.

Can I use the RWD kit on an xDrive X1?

BC gives the E84's RWD and AWD cars separate references. Use I-72 as the starting point for an AWD enquiry and I-40 for rear-wheel drive. Confirm the selected kit against the car rather than swapping them on the strength of the E84 body code.

How do BR RA and RM MA differ here?

The shop labels BR RA as pillowball front and rubber rear, while RM MA has inverted front construction and rubber rear mounts. Both series have combined compression and rebound adjustment. Confirm the ordered springs, complete mounts and rear parts for the exact I-40 or I-72 reference.

Are the E84 rear spring and damper together?

The factory E84 has a separate rear spring and damper on its five-link rear axle. Have the fitter confirm the supplied and retained parts and rear height adjustment for the selected replacement kit. The front coilover's adjustment method is not a rear fitting instruction.

What spring rates are listed?

The current I-40 RWD listing states 6 kg/mm front and 10 kg/mm rear; the I-72 AWD listing states 5.5 kg/mm front and 10 kg/mm rear. Confirm the supplied specification when ordering. These are listed spring rates, not wheel rates or a recommendation for every modified E84.

Will an M Sport or a 2012 facelift car need a different check?

Keep the full engine, build and existing suspension details with the enquiry, including any previous changes. The E84 range changed during production, and a trim badge or registration year does not settle the complete kit application, mounts or axle requirements.

How far should I lower an E84?

Agree a height with the fitter within the selected kit's usable range. Check clearance through steering and suspension movement using your actual wheels and tyres, with the normal load aboard.

Does it need alignment after fitting?

Include final alignment after the finished height is settled and clearance has been checked. Have the workshop inspect worn supporting parts first and complete any checks required for the equipment on your car.

Let’s talk suspension.

Send your E84's engine, build and drivetrain details. Include the wheel specification and details of the suspension fitted now. We can help you check the I-40 or I-72 configuration and the parts your fitter needs.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.