Orange BMW X1 U11 M Sport, lightly lowered on dark wheels in a Lake District lay-by

BMW X1 U11 and iX1.
The coilover guide.

Shop the coilovers

BC Racing lists one kit for the front-drive X1 and another for the electric iX1. Order against your drivetrain and powertrain, then set the height around loads and usable travel.

Which X1 U11 and iX1 do you have?2 listed kits · 1 brandReviewed 21 November 2026

X1 U11 and iX1 history

The U11 is the third-generation X1, launched in 2022, and the iX1 is its electric version. BC lists I-119 for the front-drive X1 and I-126 for the all-wheel-drive iX1. The electric car's battery makes it much heavier, which is why its rates differ.

These are family cars. Tell the supplier how the car is loaded and whether it tows before agreeing a ride height.

BMW launched the third-generation X1 in 2022, still on a front-drive platform with xDrive available, and introduced the fully electric iX1 alongside it. The petrol and diesel X1 and the electric iX1 share their body but not their weight.

The iX1 carries its battery under the floor, so it weighs considerably more than an sDrive X1. BC's default rates reflect that: 6 kg/mm front and 6.5 kg/mm rear for the X1, and 7 kg/mm front and 13 kg/mm rear for the iX1.

The earlier F48 X1 uses different parts and has its own guide. The U11 shares its platform with the U10 X2 and iX2, which also have their own BC references.

Start with your X1 U11 and iX1.

Confirm the chassis, year and existing suspension before choosing your setup.

White BMW X1 U11 on silver wheels on a suburban street

Front-drive X1

BC lists I-119 for the front-drive X1 from 2022, as BR RA with a pillowball front or RM MA with an inverted front. Give the supplier the engine and build date, and ask whether the kit suits an xDrive car.

Check my X1 U11
Grey BMW iX1 electric parked at a charging point

Electric iX1

BC lists I-126 for the all-wheel-drive iX1 from 2022, in BR RA form with default rates of 7 kg/mm front and 13 kg/mm rear for the battery's weight. Confirm the model and build date with the supplier.

Check my iX1
Black BMW X1 U11 on gunmetal wheels outside a modern workshop

xDrive and adaptive dampers

I-119 is listed for the front-drive X1. Ask the supplier before ordering for an xDrive X1, and tell it if the car has adaptive dampers.

Check my X1 xDrive

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · I-119 BR RA, subject to an application check

BC lists I-119 BR RA for the front-drive X1. Have the application checked before ordering.

Read the buying advice

I-119 BR RA is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Agree a height that keeps enough travel with the car loaded.

  • Confirm front-drive
  • Leave travel for loads
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing I-126, subject to an application check

BC lists I-126 for the iX1, with firmer rear springs for the battery's weight. Confirm the model first.

Read the buying advice

I-126 has default rates of 7 kg/mm front and 13 kg/mm rear. Do not fit an X1 kit to an iX1: the weight difference is too large. Use a workshop familiar with electric cars and their lifting points.

  • Confirm the iX1
  • Use the iX1 kit
  • Use an EV-aware workshop
View current configurations
Selected configurationSee optionsinc. VAT · I-119 RM MA, subject to an application check

BC's RM MA version of I-119 has an inverted front damper. Confirm it suits your car and use.

Read the buying advice

The RM version is listed at a higher price than BR. Tell the supplier how you drive and what tyres you use, and agree spring rates and starting settings.

  • Confirm the RM application
  • Give tyre details
  • Agree rates and settings
View current configurations

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW X1, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The U11's rear spring sits separately from the damper on a multi-link axle. Because the springs sit in different positions front and rear, BC's front and rear figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Agree any rate changes for your loads with the supplier, and check the alignment at the final ride height.

Read about ride height and spring preload
Silver BMW X1 U11 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. For an iX1, use a workshop familiar with electric cars and their lifting points. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check the powertrain and drivetrain

Confirm whether the car is a petrol or diesel X1 or an electric iX1, and whether it is front-drive or xDrive. Those answers decide which BC reference applies.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car carries or tows. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current X1 U11 and iX1 range.

Compare the controls and hardware included in each range.

BC Racing

I-119 is listed for the front-drive X1 U11 from 2022, as BR RA or RM MA, with default rates of 6 kg/mm front and 6.5 kg/mm rear. I-126 is listed for the all-wheel-drive iX1 from 2022 in BR RA form, at 7 kg/mm front and 13 kg/mm rear. Both have 30-way rebound adjustment. Ask BC about xDrive X1s.

View BC Racing X1 U11 and iX1 kits

Find your X1 U11 and iX1 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All X1 U11 and iX1 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X1 U11 and iX1 kit links and part numbers

Before you order.

  1. Identify your car

    Send the model, engine or motor, drivetrain, build date, VIN and options list, including adaptive dampers and any towbar.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about BMW X1 U11 and iX1 coilovers.

Check the details before choosing your kit.

Can I fit the X1 kit to an iX1?

No. The iX1 is much heavier because of its battery and has its own BC reference, I-126, with firmer rear springs.

Does I-119 fit an xDrive X1?

BC lists I-119 for the front-drive X1. Ask BC before ordering for an xDrive car.

Do F48 X1 kits fit the U11?

No. The F48 that came before has different parts and its own guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every X1. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the X1's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.