
BMW X3 F25.
The coilover guide.
Shop the coiloversCheck that your F25 is an xDrive model and whether it has factory electronic dampers before choosing I-56. BR RN comes without front top mounts; RM MA is listed with inverted front dampers and rubber rear mounting. Have the fitter confirm the complete mounting parts for the option you choose.
The second X3 and its 2014 update
BC's I-56 application covers the 2011-2017 AWD X3 F25. BMW also sold a rear-wheel-drive sDrive18d, so the F25 body code alone does not identify the right application. Supply the engine and build details and confirm which drivetrain the car has.
Give the fitter the wheel widths, offsets and tyre sizes, including any spacers. Explain the roads you use and the passenger or luggage load you normally carry. Those details help them check clearance and agree a usable height before setting up the car.
BMW introduced the second-generation X3 in 2010. The F25 has a double-joint spring-strut front axle and a five-link rear axle. Its factory rear spring surrounds the damper in a spring-strut assembly.
The updated UK range went on sale in June 2014, with changes to the body, equipment and diesel engines. It included the rear-wheel-drive sDrive18d alongside xDrive models. A facelift or trim badge does not extend I-56's AWD application to an sDrive car.
Dynamic Damper Control was optional on the F25. Check the actual equipment and any previous suspension changes before ordering replacement dampers. Ask the supplier and fitter how the selected kit will treat that equipment; do not assume the factory adjustment will remain available.
Start with your X3 F25.
Confirm the chassis, year and existing suspension before choosing your setup.

F25 X3 with xDrive
I-56 is the current BC reference for the 2011-2017 AWD F25. Send the engine and build details, confirm xDrive and identify the dampers fitted now. Ask which BR RN or RM MA parts suit the car, including the front mounts and any treatment needed for factory electronic damper control.
Check my F25 X3Choose the kit for your F25
The current I-56 choices are BR RN and RM MA. Discuss the mounting parts and damper construction with the fitter, then choose the specification for your car and intended use.
Discuss I-56 BR RN with the fitter and include the front mounting parts in the quote.
Read the buying advice
BR RN has no front top mounts supplied and is listed with rubber rear mounting. Have the fitter decide which front mounts and supporting parts must be retained or renewed. BR uses one adjustment for compression and rebound together. Explain how much firmness you are comfortable with, and check clearance with your normal passenger and luggage load when agreeing the height.
- Check I-56 BR RN for your xDrive car
- Confirm the front mounts needed
- Agree the height with your normal load
Ask whether RM MA's inverted front dampers suit the car and the work you plan.
Read the buying advice
RM MA is listed with inverted front dampers and rubber rear mounting. Ask the supplier to identify its complete mounting parts and confirm the ordered spring specification. Like BR, RM uses a single combined compression and rebound adjustment. Discuss your wheel sets, tyres and running weight when comparing the two options. The series name alone does not tell you how either kit will ride on your F25.
- Confirm the RM MA mounting parts
- Discuss both wheel and tyre sets
- Include the spring specification and setup
Have the builder assess the completed F25 and agree the suspension specification before ordering.
Read the buying advice
Give the builder the car's running weight, tyre specification and intended events, together with details of the chassis work. Discuss any changes still planned so they can assess the finished car. Check usable suspension travel and tyre clearance, and agree the spring and damper specification. Include the inspection and servicing work the project will need.
- Describe the completed car and planned work
- Check travel and tyre clearance
- Agree the setup and servicing plan
The F25 rear spring sits around the damper
The rear spring surrounds the damper on a standard BMW X3 F25.
Component layout only. Mounts, dimensions and adjusters vary by kit.BMW's F25 suspension documentation identifies a five-link HA5 rear axle with spring-strut assemblies. The spring surrounds the damper in the factory layout. The compact illustration shows those positions, without giving aftermarket dimensions or identifying the parts supplied with I-56.
Have the fitter confirm the rear spring, damper and mounting parts for the ordered BR RN or RM MA configuration. Establish which parts are supplied and which need to be reused or renewed. An option's short configuration label is not a complete fitting parts list.
Follow the instructions for the exact kit when setting rear height and spring preload. The workshop should check the mounting points and suspension joints, then establish clearance and usable travel at the proposed height. Include the normal load you carry in that discussion.
Understand height and spring preload
Agree the mounting parts and fitting work
Identify the dampers already on the car, including factory electronic control and any earlier modifications. The fitting quote should cover the selected kit's mounts and supporting parts, with worn bearings, joints and bushes checked before the height is set. Confirm the treatment of electronic damper equipment before the car is taken apart.
Allow for clearance checks through steering and suspension movement, height setting and final alignment. Provide the actual wheel and tyre specifications and any spacer details. Agree the follow-up inspection and any equipment checks needed for your particular F25.
Wheels and tyres
Choose the wheel and tyre package before agreeing a low setting. Supply the widths, offsets, tyre sizes and spacer details so the fitter can check clearance to the struts, arches and liners. Include both wheel sets if you change tyres for events.
Mounts and factory damper controls
BR RN comes without front top mounts, so agree what the fitter will retain or renew. Ask which mounting parts come with RM MA, too. If the car has factory electronic dampers, ask how the selected kit will treat their controls before ordering.
Height and alignment
Have the fitter check clearance through steering and suspension movement at the proposed height, with your normal load aboard. Follow the ordered kit's adjustment instructions, let the suspension settle and have the alignment completed at the finished height.
Circuit preparation
Tell the builder about the tyres, running weight and chassis changes before choosing springs and dampers for events. Include brake and suspension inspections in the preparation. Record the settings used so later changes can be assessed against the car's behaviour.
The current X3 F25 range.
See the controls and hardware in the listed kit.
BC lists I-56 for the AWD F25. This shop has BR RN and RM MA options, with a current listed spring specification of 6 kg/mm front and 6 kg/mm rear. Both series have combined compression and rebound adjustment and rebuildable dampers. RN specifies no front top mount supplied; MA identifies an inverted front and rubber rear mounting. Confirm the complete ordered parts and spring specification with the supplier.
View BC Racing X3 F25 kitsFind your X3 F25 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All X3 F25 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW X3 (AWD) (11-17) [F25]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-56
BC Racing Coilovers - BMW X3 (AWD) (11-17) [F25]
Check the exact application
All X3 F25 kit links and part numbers
Before you order.
Identify your car
Confirm the car is an F25 with xDrive, and supply the engine and build details. I-56's AWD listing does not establish an application for sDrive.
Match the kit
Identify the dampers fitted now, including any factory electronic control or previous changes. Agree how the selected kit will treat that equipment.
Check what’s included
Choose the exact BR RN or RM MA configuration with the supplier and fitter. Confirm the spring specification and all supplied, retained or renewed mounts and supporting parts.
Check your modifications
Provide wheel widths, offsets, tyre sizes and spacer details. Discuss the proposed height with the passenger or luggage load you normally carry.
Plan fitting
Include fitting, clearance checks, height setting and final alignment in the quote. Check current availability and delivery when ordering.
Questions about BMW X3 F25 coilovers.
Check the details before choosing your kit.
Which BC Racing kit is listed for the F25 X3?
The manufacturer table identifies I-56 for the 2011-2017 X3 AWD F25. The current shop choices are BR RN and RM MA. Confirm the exact engine, build, drivetrain and suspension equipment before ordering.
Does the I-56 listing cover an sDrive F25?
The current I-56 application is AWD. BMW's updated UK F25 range included a rear-wheel-drive sDrive18d, so the F25 code alone does not establish compatibility. Have the drivetrain and exact application checked; do not order an AWD listing for sDrive on that assumption.
Do BR and RM adjust compression and rebound separately?
Both series use one adjustment that changes compression and rebound together. Follow the instructions for the ordered kit and agree a starting setup with the fitter.
What do the RN and MA labels tell me?
BR RN is listed without front top mounts and with rubber rear mounting. RM MA is listed with inverted front dampers and rubber rear mounting. Have the supplier confirm the complete front and rear parts for the chosen configuration, including anything your fitter must reuse or renew.
What if my F25 has factory electronic dampers?
Dynamic Damper Control was optional on the F25. Identify the actual equipment, then ask the supplier and fitter to confirm its treatment with the chosen kit. This listing does not promise retained factory adjustment or identify a compatible cancellation module.
Are the F25 rear spring and damper together?
BMW's factory F25 rear axle has spring-strut assemblies, with the spring around the damper. Confirm the construction and mounting parts of the ordered replacement kit and follow its rear adjustment instructions. The factory layout illustration does not identify the supplied I-56 parts.
What spring rates are listed for I-56?
The current merchant specification is 6 kg/mm front and 6 kg/mm rear. Confirm the supplied specification when ordering. These figures are spring rates. They do not establish equal wheel rates or predict how every modified F25 will ride.
What should the fitting quote include?
Include the mounts and supporting parts, treatment of any factory damper controls, clearance checks through suspension and steering movement, height setting and final alignment. Agree a usable height with your actual wheels, tyres and normal load, then confirm any follow-up inspection.
Let’s talk suspension.
Send your F25's engine, build and drivetrain details with the wheel specification and details of the dampers fitted now. We can help you check the I-56 configuration and the mounting parts your fitter needs.



