
BMW X3 G01 and X4 G02.
The coilover guide.
Shop the coiloversBC Racing lists one kit for the all-wheel-drive X3 G01 and X4 G02. Check the car is xDrive and how it is loaded, then set the height around clearance and usable suspension travel.
X3 G01 and X4 G02 history
The G01 X3 and the coupe-styled G02 X4 share their running gear, which is why BC lists one reference, I-100, for both in all-wheel-drive form. It does not cover the X3 M or X4 M, which have their own guide, or the later G45 X3.
As family cars, many of these carry passengers, luggage or a towbar. Tell the supplier how the car is used before agreeing a ride height.
BMW launched the third-generation X3 in 2017 and the second-generation X4 in 2018 on the same platform. Most UK cars are xDrive, with petrol, diesel and plug-in hybrid versions, and M40i and M40d models at the top of the range.
Some cars have adaptive dampers as part of their options, and the plug-in hybrid carries extra weight from its battery. Give the supplier the exact engine and options so it can confirm the kit and rates.
The G01 X3 was replaced by the G45 in 2024, which has its own BC reference and guide. The X3 M and X4 M use different parts again.
Start with your X3 G01 and X4 G02.
Confirm the chassis, year and existing suspension before choosing your setup.

X3 G01 xDrive
BC lists I-100 for the all-wheel-drive X3 from 2018, with default rates of 5.5 kg/mm front and 7 kg/mm rear. Give the supplier the engine, build date and options list, and ask it to confirm the kit for your car.
Check my X3 G01
X4 G02 xDrive
I-100 lists the X4 G02 alongside the X3. The X4's lower roofline does not change the suspension reference, but give the supplier the exact engine and build date so it can confirm the application.
Check my X4 G02
Towing, hybrids and adaptive dampers
Tell the supplier about any towbar, the plug-in hybrid's extra weight and any adaptive dampers. Ask how the kit handles the factory damper system and whether the rates suit your loads.
Check my loaded X3Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists I-100 BR RN for the all-wheel-drive X3 and X4. Have the application and factory dampers checked before ordering.
Read the buying advice
I-100 is a possible starting point once the supplier has confirmed fitment. The RN configuration has no front top mount and a rubber rear mount, so ask which factory parts are reused. Agree a height that keeps enough travel with the car loaded.
- Confirm xDrive
- Leave travel for loads
- Include alignment
Use the 30-way rebound adjuster to find a setting that suits your roads. Start in the middle of the range.
Read the buying advice
BC's BR series has 30-way rebound adjustment. Start in the middle, drive your usual roads, and adjust in small steps. If you want a firmer car, ask the supplier about different spring rates rather than relying on damping alone.
- Start mid-range
- Adjust in small steps
- Ask about spring rates
Tell the supplier about towing and the hybrid's battery weight. The kit's rates need to suit how the car is loaded.
Read the buying advice
A car that tows or carries a hybrid battery sits lower at the rear when loaded. Give the supplier the towing weight and the engine, and ask whether the standard rates suit it. Check the height and alignment with the car in its normal state.
- Give the towing weight
- Confirm the engine
- Check height loaded
Check where the rear spring carries the load
On a standard BMW X3, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The X3 and X4 have a multi-link rear axle with the spring mounted separately from the damper. BC's default rates are 5.5 kg/mm front and 7 kg/mm rear; because the springs sit in different positions, the figures are not a direct comparison of stiffness at the wheel.
Ask BC which rear arrangement the kit uses and what it supplies at the spring seat. Agree any rate changes for your loads with the supplier, and check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with adaptive dampers, agree in advance how the factory wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Check the engine and options
Confirm from the VIN data the engine, whether the car has adaptive dampers and whether it has a towbar. Those details affect the rates and fitting work.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car carries or tows. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current X3 G01 and X4 G02 range.
See the controls and hardware in the listed kit.
I-100 is listed for the all-wheel-drive X3 G01 and X4 G02 from 2018, in BR RN form with no front top mount and a rubber rear. BC gives default rates of 5.5 kg/mm front and 7 kg/mm rear and 30-way rebound adjustment. It does not list the X3 M or X4 M.
View BC Racing X3 G01 and X4 G02 kitsFind your X3 G01 and X4 G02 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All X3 G01 and X4 G02 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW X3/X4 (AWD) (18+) [G01/G02]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-100
BC Racing Coilovers - BMW X3/X4 (AWD) (18+) [G01/G02]
Check the exact application
All X3 G01 and X4 G02 kit links and part numbers
Before you order.
Identify your car
Send the engine, build date, VIN and options list, including any adaptive dampers and towbar.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about BMW X3 G01 and X4 G02 coilovers.
Check the details before choosing your kit.
Does the same kit fit the X3 and X4?
BC lists I-100 for both the G01 X3 and G02 X4 in all-wheel-drive form. Confirm the engine and build date for your car.
Does I-100 fit the X3 M or X4 M?
No. The X3 M F97 and X4 M F98 have their own BC reference, I-107, covered in a separate guide.
Does it fit the new G45 X3?
No. The G45 that arrived in 2024 has its own reference, I-167.
Can I tow with coilovers fitted?
Tell the supplier about the towbar and typical loads before ordering, and keep enough suspension travel with the car loaded.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every X3. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the X3's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



