Red BMW X3 M Competition, lightly lowered on black wheels in a Peak District lay-by

BMW X3 M F97 and X4 M F98.
The coilover guide.

Shop the coilovers

BC Racing lists I-107 for both the X3 M and X4 M, in BR and RM versions. Choose the version for how you drive, and agree how the factory adaptive dampers will be replaced.

Which X3 M F97 and X4 M F98 do you have?1 listed kit · 1 brandReviewed 21 November 2026

X3 M and X4 M history

The F97 X3 M and F98 X4 M are BMW M's high-performance SUVs, with the S58 straight-six and M xDrive. BC lists one reference, I-107, for both, offered as a BR kit with no front top mount or an RM kit with an inverted front damper.

They are separate from the ordinary X3 and X4, which use BC's I-100. Give the supplier the body, build date and options list before ordering.

BMW launched the X3 M and X4 M in 2019 as the first full M versions of these cars, in standard and Competition form. Both use M xDrive all-wheel drive and BMW M's own suspension tuning, with adaptive M dampers.

A facelift followed in 2021. Give the supplier the build date with the order so it can confirm the kit for the exact car.

These cars weigh more than an M3 and sit higher, so the ride height you choose affects how much travel the suspension has on rough roads. Agree the height around clearance and travel, not appearance alone.

Start with your X3 M F97 and X4 M F98.

Confirm the chassis, year and existing suspension before choosing your setup.

White BMW X3 M on silver wheels on an English country lane

X3 M F97

BC lists I-107 for the X3 M from 2019, with default rates of 6.5 kg/mm front and 10 kg/mm rear. Give the supplier the build date and whether the car is a Competition, and ask it to confirm the version and supplied mounts.

Check my X3 M
Grey BMW X4 M with quad exhausts and black wheels outside a modern workshop

X4 M F98

I-107 lists the X4 M alongside the X3 M. The coupe roofline does not change the reference, but give the supplier the build date and options so it can confirm the application.

Check my X4 M
Black BMW X3 M Competition on gunmetal wheels in front of closed circuit pit garages

Track days

The RM version uses an inverted front damper. Tell the supplier about the tyres, circuits and how often the car runs, and ask whether the standard rates suit that use. Agree the plan for the adaptive dampers before booking fitting.

Check my track X3 M

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · I-107 BR RN, subject to an application check

BC lists I-107 BR RN with no front top mount and a rubber rear. Have the application and adaptive damper plan checked first.

Read the buying advice

The BR RN version is a possible starting point for a road X3 M or X4 M once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Ask which factory parts are reused, and agree a height that leaves travel for bumps.

  • Confirm the body and build date
  • Agree the adaptive damper plan
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · I-107 RM MA, subject to an application check

BC's RM MA version has an inverted front damper and rubber rear mount. Confirm it suits your car and use.

Read the buying advice

An inverted front damper is often chosen for its stiffness under heavy cornering loads. Tell the supplier about your circuits and tyres, and agree spring rates and starting settings. Confirm the mounts supplied with the RM version for your car.

  • Confirm the RM application
  • Give your tyre details
  • Agree rates and settings
View current configurations

Coilovers with manual damping replace the factory adaptive M dampers. Agree what happens to the warning lights and modes.

Read the buying advice

Ask BC and the fitter how the kit handles the factory damper wiring, what the car will show afterwards and whether any extra part is needed. Settle that before ordering so the fitting can be booked once.

  • Ask about the wiring
  • Confirm any extra parts
  • Book fitting once
Discuss the damper change on my X3 M

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW X3 M, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The X3 M and X4 M have a multi-link rear axle with the spring mounted separately from the damper. BC's default rates are 6.5 kg/mm front and 10 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the spring seat. Agree any rate changes with the supplier, and check the alignment at the final ride height.

Read about ride height and spring preload
Blue BMW X4 M standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Agree in advance how the factory adaptive damper wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check the body, build date and dampers

Confirm from the VIN data whether the car is an X3 M or X4 M, its build date and whether it is a Competition. Agree the adaptive damper plan with the supplier.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current X3 M F97 and X4 M F98 range.

See the controls and hardware in the listed kit.

BC Racing

I-107 is listed for the X3 M F97 and X4 M F98 from 2019 in two versions: BR RN with no front top mount and a rubber rear, and RM MA with an inverted front and rubber rear. BC gives default rates of 6.5 kg/mm front and 10 kg/mm rear. Ask BC how the kit treats the adaptive M dampers.

View BC Racing X3 M F97 and X4 M F98 kits

Find your X3 M F97 and X4 M F98 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All X3 M F97 and X4 M F98 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X3 M F97 and X4 M F98 kit links and part numbers

Before you order.

  1. Identify your car

    Send the body, build date, VIN and options list, including Competition status and the adaptive dampers.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including the adaptive damper work. Confirm delivery timing before reserving workshop time.

Questions about BMW X3 M F97 and X4 M F98 coilovers.

Check the details before choosing your kit.

Does I-107 fit the ordinary X3 or X4?

No. The G01 X3 and G02 X4 use BC's I-100. I-107 is for the X3 M and X4 M.

What is the difference between BR and RM?

BR RN has no front top mount and a rubber rear mount. RM MA uses an inverted front damper with a rubber rear. Both are listed with the same default rates.

What happens to the adaptive M dampers?

Coilovers with manually adjusted dampers replace them. Ask BC how its kit handles the wiring, warning lights and driving modes.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every X3 M. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the X3 M's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.