Dark blue BMW X5 E70 on upgraded wheels beside a country road

BMW X5 E70.
The coilover guide.

Shop the coilovers

If your E70 has rear air suspension, include the conversion work in the coilover quote. BC requires a rear upper spring pad for an I-77 air-to-coil conversion. Ask the supplier and fitter to agree the complete parts package and check any Adaptive Drive equipment before ordering.

Which X5 E70 do you have?1 listed kit · 1 brandReviewed 19 November 2026

The second X5 brought different suspension equipment

Start by identifying the suspension on your X5. Give the fitter its engine and build details, the factory equipment record and any changes made by previous owners. Rear air springs and electronic dampers affect the work involved in replacing the suspension.

The shop lists BC Racing I-77 BR RS for the AWD E70. Explain what you want to improve on your usual roads. Include your wheel and tyre specifications and the loads you normally carry when discussing the springs and finished height.

The E70 replaced the original X5, with UK sales starting in April 2007. BMW retained xDrive and introduced double-wishbone front suspension, an Integral IV rear axle and an optional third row of seats. The engine, seating and equipment on your car need checking against the proposed kit.

Adaptive Drive combined active anti-roll bars with Electronic Damper Control. Replacing the dampers therefore needs an equipment check as well as a mounting check. Have the supplier explain what will happen to the systems fitted to your X5 before the workshop removes anything.

BC names I-77 for the 2007-2013 AWD X5/X6 E70/E71 and specifies rear upper spring pad 33536857006 for an air-to-coil conversion. Ask whether that part is supplied and what else your car needs. The shared X5/X6 listing does not establish compatibility with every engine, X5M or suspension option.

Start with your X5 E70.

Confirm the chassis, year and existing suspension before choosing your setup.

Grey BMW X5 E70 on upgraded wheels parked beside a quiet road

E70 X5 with all-wheel drive

Have I-77 BR RS checked against your engine, build and current suspension. Tell us whether the car has rear air springs or Adaptive Drive, and whether it has already been converted. An air-to-coil quote needs to cover the spring-pad requirement and the rest of the conversion work.

Check my E70 X5

Choose the setup for the X5 you drive

BR RS is the I-77 configuration currently listed in the shop. Discuss the application and fitting work first, then choose the spring specification and height for your car's use.

Selected configurationSee optionsinc. VAT · I-77 BR RS · confirm your E70 application

Include the mounting and any air-suspension conversion work in the budget.

Read the buying advice

Describe how the car behaves on rough roads and what you would like to change. The listing specifies rubber mounts at the front and rear. Ask the fitter to assess the existing joints and bushes too, so worn parts are included in the quote. Agree the usable height with your wheels and normal passenger or luggage load.

  • Check I-77 BR RS against your car
  • Agree the complete fitting package
  • Allow travel for your roads and loads
View current configurations

Provide your event plans and wheel and tyre specifications, including any separate circuit setup.

Read the buying advice

The shop lists 10 kg/mm front springs and 9 kg/mm rear springs for I-77. Have the builder assess those rates for the car's running weight, tyres and planned use. Include both road and circuit wheel specifications if they differ. Agree the setup and inspection work between events; the spring numbers alone cannot tell you how the car will ride or handle.

  • Supply both wheel and tyre specifications
  • Discuss the listed 10/9 kg/mm springs
  • Arrange setup and inspections
Discuss my E70's road and circuit use

Choose the suspension once the builder knows the car's running specification.

Read the buying advice

Give the builder the running weight, tyre details and planned chassis changes. They need to assess the spring and damper requirements, available travel and mounting parts for that car. Include servicing and inspection in the budget. The standard I-77 application is a starting point for the discussion, rather than a specification for a substantially modified X5.

  • Describe the completed car and planned work
  • Agree springs and dampers with the builder
  • Budget for inspections and servicing
Discuss my E70 circuit project

Account for the rear air-suspension conversion

Conceptual suspension layout

On an air-equipped E70, the rear air spring occupies a separate seat from the damper. Have the fitter identify the parts on your own X5, including anything changed during an earlier conversion.

BC specifies rear upper spring pad 33536857006 when converting the I-77 application from air to coil springs. Settle the complete parts list with the supplier and workshop. That one part number does not tell you everything the conversion needs or establish how the car's self-levelling system will be treated.

Use the instructions for the ordered BC kit to establish the rear spring and damper arrangement and how its height is set. Arnott's separate C-3697 conversion has its own hardware and electronic module; its instructions cannot be used as the fitting procedure for I-77.

Read about height and spring preload
Silver BMW X5 E70 resting on its wheels beside a mechanic outside a workshop

Agree the conversion work before fitting day

Ask for a quote covering the ordered kit, mounting parts and any air-to-coil work. Identify Adaptive Drive and electronic dampers before choosing replacement parts, and agree how the affected factory functions will be treated. Have the workshop inspect the joints and bushes while planning the job.

Give the fitter the wheel widths, offsets and tyre sizes, plus any spacer details. They need to check clearance through steering and suspension movement, then set the height and complete the alignment. Discuss the load you normally carry and arrange any equipment checks and follow-up inspection.

Wheels and tyres

Supply the actual wheel widths, offsets, tyre sizes and spacer details. A parked clearance check is only part of the job: the tyres need room as the steering and suspension move. Have the fitter check the arches, liners and suspension at the proposed height.

Air springs and electronic equipment

Establish which suspension parts and controls are fitted now. Agree the complete conversion package and the treatment of self-levelling and any Adaptive Drive equipment with the supplier and fitter. A trim badge or shared chassis listing cannot settle those details.

Height and alignment

Choose a height that leaves usable travel and clearance with the load you carry. Follow the ordered kit's adjustment instructions and include final alignment in the quote. If you tow or regularly carry heavier loads, have the supplier assess that use before choosing the suspension.

Circuit preparation

Have the builder assess the running weight, tyres and chassis changes before specifying the suspension for events. Record the settings used and arrange inspections, so later adjustments can be compared with the car's behaviour.

The current X5 E70 range.

See the controls and hardware in the listed kit.

BC Racing

The current I-77 shop configuration is BR RS, with rubber front and rear mounts and listed spring rates of 10 kg/mm front and 9 kg/mm rear. BR has one adjuster for compression and rebound together and is rebuildable. Confirm the ordered specification, mounting parts and any conversion requirements for your E70.

View BC Racing X5 E70 kits

Find your X5 E70 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All X5 E70 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X5 E70 kit links and part numbers

Before you order.

  1. Identify your car

    Supply the E70 chassis, engine and build details for the I-77 AWD application check. Identify an X5M explicitly.

  2. Match the kit

    Identify the suspension fitted now, including rear air springs, Adaptive Drive, electronic dampers and any previous conversion.

  3. Check what’s included

    Agree BR RS and the spring specification. For an air-to-coil conversion, confirm the rear upper spring pad and complete hardware package, plus the treatment of affected factory functions.

  4. Check your modifications

    Provide wheel widths, offsets, tyre sizes and spacer details. Discuss the intended height and normal load, including any towing use.

  5. Plan fitting

    Include fitting, equipment checks and final alignment in the quote, with any follow-up inspection. Check current availability and delivery before ordering.

Questions about BMW X5 E70 coilovers.

Check the details before choosing your kit.

Which coilover kit is listed for the E70 X5?

The current shop listing is BC Racing I-77 BR RS for the AWD E70/E71 application. Have the supplier check your X5's engine, build and suspension equipment before ordering. The shared listing does not establish suitability for every E70 or X5M.

What if my E70 has rear air suspension?

BC specifies rear upper spring pad 33536857006 for an I-77 air-to-coil conversion. Ask whether it is supplied and agree the full conversion package and treatment of self-levelling with the supplier and fitter. The pad alone is not a complete parts list.

Does BR RS retain Adaptive Drive?

The I-77 listing does not confirm whether Adaptive Drive will be retained. BMW's Adaptive Drive combines active anti-roll bars and Electronic Damper Control. Identify the equipment on your X5 and agree with the supplier and fitter what will happen to it before ordering replacement suspension.

What does RS mean on this listing?

The shop specifies rubber top mounts at the front and rear for I-77 BR RS. Confirm the supplied and retained mounting parts with the supplier, including anything the workshop needs to renew. An air-equipped car also needs its conversion requirements settled.

Does BR adjust compression and rebound separately?

BR uses one adjuster to change compression and rebound together. BC describes 30 clicks of combined adjustment. Follow the instructions for the ordered kit and agree the starting setup with the fitter.

Is the factory rear air spring separate from the damper?

Yes, the air-equipped E70 arrangement shown here has a separate rear air spring and damper. Have the fitter inspect your car for previous changes. The factory layout and Arnott's separate conversion manual do not establish the BC kit's complete contents or fitting procedure.

What spring rates are listed for I-77 BR RS?

The shop lists 10 kg/mm front and 9 kg/mm rear. Confirm the rates on the ordered kit and discuss your running weight, tyres and use with the builder. Those spring numbers alone do not guarantee a particular ride or handling balance.

How low can I set my E70?

Have the fitter establish a usable height within the ordered kit's range. They need to check suspension travel and tyre clearance as the car steers and moves, allowing for the loads you use. Arrange final alignment once the height is set.

Let’s talk suspension.

Send the engine and build details for your E70, its suspension equipment and any previous changes. Add the wheel and tyre specification and explain how you use the X5. We can help check the I-77 BR RS application and the parts to discuss with your fitter.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.