
BMW X5 G05 and X5 M/X6 M.
The coilover guide.
Shop the coiloversCheck whether the car has air suspension before anything else. Then choose between BC's I-102 for the X5 and I-159 for the X5 M and X6 M, and set the height around loads and travel.
X5 G05 history
The G05 X5 can be ordered with steel springs or with two-axle air suspension. A coilover kit is a steel-spring system, so the factory set-up decides how much work the change involves. Give the supplier the options list before comparing prices.
BC lists I-102 for the all-wheel-drive X5 from 2020 and I-159 for the X5 M and X6 M. BC labels the M kit G05/G06; BMW's own codes for those cars are F95 and F96.
BMW launched the fourth-generation X5 in 2018. It is built with xDrive all-wheel drive, with petrol, diesel and plug-in hybrid engines, and an M50 or M60i at the top of the standard range. Two-axle air suspension and adaptive dampers were available as options.
The X5 M and X6 M followed in 2019 with BMW M's twin-turbo V8 and their own suspension tuning. BC covers them with a separate reference.
These are heavy cars that often tow or carry a full load. Tell the supplier how the car is used, because the rates and ride height have to suit the loaded car.
Start with your X5 G05 and X5 M/X6 M.
Confirm the chassis, year and existing suspension before choosing your setup.

X5 G05 with steel springs
BC lists I-102 for the all-wheel-drive X5 from 2020, in BR RN form with default rates of 12 kg/mm front and rear. Give the supplier the engine, build date and options list, and ask it to confirm the kit for your car.
Check my X5 G05
X5 with air suspension
BC's listing does not say how the kit handles factory air suspension. Tell the supplier if the car has it, and ask what is needed for the air system, warning lights and self-levelling before ordering.
Check my air-suspension X5
X5 M and X6 M
BC lists I-159 for the X5 M and X6 M from 2020, with default rates of 12 kg/mm front and 10 kg/mm rear. Confirm the body, build date and factory suspension with the supplier.
Check my X5 M or X6 MChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists I-102 BR RN for the all-wheel-drive X5. Confirm the car has steel springs before ordering.
Read the buying advice
I-102 is a possible starting point for a steel-spring X5 once the supplier has confirmed fitment. BC lists 12 kg/mm front and rear. Agree a height that keeps enough travel with the car loaded or towing, and include alignment.
- Confirm steel springs
- Leave travel for loads
- Include alignment
Replacing factory air springs with coilovers involves more than the kit. Ask the supplier before ordering.
Read the buying advice
Ask the supplier what is needed to replace the air springs and how the car's systems will respond. Get the extra parts and wiring work quoted alongside the kit, and confirm the car will not show faults afterwards.
- Confirm the factory air system
- Ask about extra parts
- Get the work quoted together
BC lists I-159 for the X5 M and X6 M. Confirm the application and factory dampers first.
Read the buying advice
I-159 has 30-way rebound adjustment and default rates of 12 kg/mm front and 10 kg/mm rear. Tell the supplier about your tyres and any track use, and agree what happens to the adaptive dampers before booking fitting.
- Confirm X5 M or X6 M
- Agree the damper plan
- Start with mid settings
Check where the rear spring carries the load
On a standard BMW X5, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.On a steel-spring X5, the rear spring sits separately from the damper on a multi-link axle. Ask BC which rear arrangement its kit uses and what it supplies at the spring seat.
On an air-suspension car, the air springs, compressor and height sensors all form part of the system. Replacing them with steel coilovers changes more than the dampers, so get the full scope of work from the supplier.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with air suspension or adaptive dampers, agree in advance how the factory system will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Check the factory suspension
Confirm from the VIN data whether the car has steel springs, air suspension or adaptive dampers. That decides how much work the change involves.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car carries or tows. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current X5 G05 and X5 M/X6 M range.
Compare the controls and hardware included in each range.
I-102 is listed for the all-wheel-drive X5 G05 from 2020 and I-159 for the X5 M and X6 M, which BC labels G05/G06. Both are BR RN kits with no front top mount and a rubber rear, and 30-way rebound adjustment. Ask BC how they treat air suspension and adaptive dampers.
View BC Racing X5 G05 and X5 M/X6 M kitsFind your X5 G05 and X5 M/X6 M coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All X5 G05 and X5 M/X6 M applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW X5 (AWD) (20+) [G05]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-102
BC Racing Coilovers - BMW X5 (AWD) (20+) [G05]
Check the exact application
![BC Racing Coilovers - BMW X5M/X6M (20+) [G05/G06]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-159
BC Racing Coilovers - BMW X5M/X6M (20+) [G05/G06]
Check the exact application
All X5 G05 and X5 M/X6 M kit links and part numbers
Before you order.
Identify your car
Send the engine, build date, VIN and options list, including air suspension, adaptive dampers and any towbar.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any air-suspension or electronic work. Confirm delivery timing before reserving workshop time.
Questions about BMW X5 G05 and X5 M/X6 M coilovers.
Check the details before choosing your kit.
Can I fit coilovers to an X5 with air suspension?
Ask the supplier first. BC's listing does not say how the kit handles factory air springs, and replacing them involves the compressor, sensors and warning lights.
Does I-102 fit the X5 M?
No. The X5 M and X6 M have BC's I-159.
Why does BC call the X5 M a G05?
BC's listing is labelled G05/G06. BMW's codes for the X5 M and X6 M are F95 and F96. Order against the M application.
Can I tow with coilovers fitted?
Tell the supplier about the towbar and typical loads before ordering, and keep enough suspension travel with the car loaded.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every X5. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the X5's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



