Blue BMW X6 E71 on silver multispoke wheels parked beside a country road

BMW X6 E71.
The coilover guide.

Shop the coilovers

If your X6 has rear air suspension, price the conversion work before buying coilovers. BC specifies an extra spring pad for the I-77 air-to-coil application. Check for Adaptive Drive too, then agree the complete fitting package with the supplier and workshop.

Which X6 E71 do you have?1 listed kit · 1 brandReviewed 19 November 2026

Identify the equipment on your first-generation X6

Tell the fitter what you want to change about the way your X6 drives. A harsh ride, tyre rubbing and unwanted body movement need different checks. Include the engine and build details, the suspension fitted now and any work done by previous owners.

The current shop listing is BC Racing I-77 BR RS. Before settling on springs or a finished height, provide the wheel widths, offsets and tyre sizes. Explain the roads you use, the passengers and luggage you normally carry, and whether you tow a trailer.

The E71 X6 reached the UK in May 2008, initially as the xDrive30d, xDrive35i and xDrive35d; the xDrive50i followed later that year. BMW gave it double-wishbone front suspension, xDrive and Dynamic Performance Control, which distributes drive between the rear wheels. xDrive and Dynamic Performance Control do not tell you which springs or dampers your car has.

The launch specification included self-levelling rear suspension on the xDrive50i, while Adaptive Drive was an option. Adaptive Drive controls body roll and adjusts the dampers. Check the equipment record and the actual parts on your X6, especially if an earlier owner has changed the suspension.

BC gives I-77 a 2007-2013 application range for the AWD X5/X6 E70/E71. Its air-to-coil note requires rear upper spring pad 33536857006. Ask the supplier to confirm fitment and all conversion parts for your car. The listing does not confirm compatibility with a 2014 car, X6 M, ActiveHybrid or every suspension option.

Start with your X6 E71.

Confirm the chassis, year and existing suspension before choosing your setup.

Grey BMW X6 E71 viewed from the rear on upgraded silver wheels

E71 X6 with xDrive

Send the engine and build details for an I-77 BR RS application check. Include whether the rear uses air springs, whether Adaptive Drive is fitted and any earlier conversion. For an air-equipped car, ask for the full parts and fitting quote, including the required rear upper spring pad.

Check my E71 X6

Plan the X6's setup around its use

I-77 BR RS is the option listed here. Ask the supplier to confirm it for your X6 and identify any conversion work, then discuss the springs, dampers and usable ride height with the fitter.

Selected configurationSee optionsinc. VAT · I-77 BR RS · confirm the E71 application

Choose the finished height with your normal load and wheel clearance in mind.

Read the buying advice

Describe the bumps or corners where the current setup bothers you. The fitter can inspect worn joints and bushes while assessing the suspension. I-77 BR RS is listed with rubber mounts at both ends; confirm the supplied parts and anything that needs renewing. Allow for the air-to-coil work in the budget if your X6 has rear air springs.

  • Check BR RS against the exact car
  • Price mounting and conversion parts
  • Leave travel for normal road use
View current configurations

If you use different wheels or tyres for events, give the workshop the road and event specifications.

Read the buying advice

Explain how often the X6 will visit a circuit and what it must still do on the road. Have the builder assess its running weight, tyres and available suspension travel before agreeing the spring specification. Include setup time and inspections between events in the quote. A catalogue spring-rate figure cannot tell you how the complete car will behave.

  • Describe road use and planned events
  • Supply both tyre and wheel setups
  • Arrange setup and inspection work
Discuss road and circuit use for my E71

Agree the planned build before choosing springs and dampers.

Read the buying advice

A project with different tyres, reduced weight or other chassis work needs its own suspension assessment. Discuss the planned build with the workshop, including mounts, damper requirements and travel. Include servicing in the plan. Ask whether I-77 is suitable for that build before choosing it.

  • Provide the planned build specification
  • Have mounts and travel assessed
  • Agree servicing with the builder
Discuss my E71 circuit project

Rear air springs need a complete conversion plan

Conceptual suspension layout

The air-equipped E71 arrangement shown here has an air spring in its own seat, separate from the rear damper. The spring supports the car's load and the damper controls movement. Have the workshop inspect what is fitted now, including any earlier conversion parts.

BC's I-77 note requires rear upper spring pad 33536857006 for an air-to-coil conversion. Confirm whether it comes with the order and agree every other part needed for your car. Ask the supplier and fitter what will happen to rear self-levelling and any other factory functions affected by the conversion.

Use the instructions for the BC kit you order to check its spring layout and height adjustment. Arnott's C-3697 manual shows the rear layout on an air-equipped E71. Its perches and electronic module are parts of Arnott's conversion kit, so its fitting and wiring instructions do not apply to I-77.

Read about ride height and spring preload
Silver BMW X6 E71 on its wheels with a mechanic standing outside a workshop

Get the whole fitting job quoted

Ask the workshop to inspect the existing suspension before agreeing the parts list. Include mounts, any joints or bushes that need replacing and any rear air-to-coil work. If Adaptive Drive is fitted, ask the supplier and fitter how replacing the suspension would affect its damper and anti-roll functions before ordering.

Bring the wheel and tyre details, including spacers. Agree a usable height with the car's normal load, then have clearance checked as the steering and suspension move. Include alignment, equipment checks and any follow-up inspection in the fitting quote.

Wheel and tyre clearance

Wheel diameter alone is not enough to check clearance. Supply the width, offset, tyre size and spacer thickness at each axle. The fitter should check clearance at the arches, liners and suspension as the steering and suspension move.

Rear air and Adaptive Drive

Identify the rear springs and damper controls from the equipment record and the car itself. If rear air springs are being replaced with coils, ask for the complete conversion parts list. Have the supplier explain what will happen to any factory functions affected by the suspension change. A previous owner's conversion may also change the parts needed.

Height with the car loaded

Tell the supplier about the passengers and luggage you normally carry, and whether you tow a trailer, before choosing springs and ride height. Have the fitter check that there is enough suspension travel and tyre clearance for that use. Set the final height before completing the alignment.

Setup for events

For circuit use, record the running weight, tyres and suspension settings with the builder, together with how the car behaves. These notes let you compare the effects of later adjustments. Arrange inspections and servicing around the planned events.

The current X6 E71 range.

See the controls and hardware in the listed kit.

BC Racing

The listed I-77 BR RS specification has rubber front and rear mounts, with 10 kg/mm front springs and 9 kg/mm rear springs. BR uses one adjuster for compression and rebound together and is rebuildable. Confirm the ordered specification and conversion parts; those spring numbers alone do not predict the ride or establish suitability for your X6.

View BC Racing X6 E71 kits

Find your X6 E71 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All X6 E71 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X6 E71 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis, engine and build details. Flag a 2014 car, X6 M or ActiveHybrid when asking for the application check.

  2. Match the kit

    Confirm whether rear air springs or Adaptive Drive are fitted now, and list any previous suspension changes.

  3. Check what’s included

    Agree the BR RS spring specification and all mounting parts. For an air-to-coil conversion, confirm pad 33536857006 and every other part needed. Ask what will happen to the factory systems affected by the work.

  4. Check your modifications

    Send wheel widths, offsets, tyre sizes and spacer details. Discuss the intended height and usual passenger, luggage or towing load.

  5. Plan fitting

    Include fitting, clearance and equipment checks, final alignment and any follow-up inspection. Check current availability and delivery when ordering.

Questions about BMW X6 E71 coilovers.

Check the details before choosing your kit.

Which coilover kit is listed for the E71 X6?

The current listing is BC Racing I-77 BR RS for the AWD X5/X6 E70/E71, with a 2007-2013 application range. Ask the supplier to check your X6's engine, build and equipment, especially for a 2014 car, X6 M or ActiveHybrid. The shared X5/X6 listing does not confirm compatibility with every version.

What parts do I need if my X6 has rear air suspension?

BC specifies rear upper spring pad 33536857006 for the I-77 air-to-coil application. Confirm whether that pad is supplied and ask for the full parts list and fitting plan for your car. Before ordering, ask what will happen to self-levelling and any other factory functions affected by the conversion.

Can I keep Adaptive Drive with BR RS?

The I-77 listing does not confirm that you can keep Adaptive Drive. It controls body roll and adjusts the dampers. Ask the supplier and fitter to check which equipment your X6 has and explain how the suspension change would affect those functions before choosing the kit.

What mounts does the BR RS listing specify?

The shop lists rubber mounts at the front and rear. Ask the supplier to confirm the parts supplied with your order and what the workshop must retain or renew. Any rear air conversion needs its complete hardware package agreed separately.

Are compression and rebound adjusted separately?

BR has one control that changes compression and rebound together. BC describes 30 clicks of combined adjustment. Use the ordered kit's instructions and agree the initial setup with the fitter.

Is the rear air spring separate from the damper?

Yes. The air-equipped E71 layout illustrated here has an air spring separate from the rear damper. Have your own car inspected for previous changes. Arnott's manual shows its own conversion kit; it does not confirm the parts or fitting procedure for BC I-77.

What spring rates are listed for I-77 BR RS?

The listing specifies 10 kg/mm front and 9 kg/mm rear. Confirm the ordered rates and discuss the car's running weight, tyres and use with the builder. A spring rate alone cannot tell you the wheel rate or how the complete car will ride.

How low can I run an E71 X6?

Have the fitter establish a usable height within the ordered kit's adjustment range. Allow for suspension travel, steering clearance and the loads you carry. Have tyre clearance checked as the steering and suspension move, then complete the alignment once the height is set.

Let’s talk suspension.

Send us your X6's engine and build details, the suspension fitted now and any earlier changes. Include the wheel and tyre specification and what you want to improve. We can help check whether I-77 BR RS is suitable and identify the fitting and conversion questions to discuss with your workshop.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.