Blue BMW X6 F16 on silver aftermarket wheels parked beside a country road

BMW X6 F16.
The coilover guide.

Shop the coilovers

Rear air springs and electronic dampers affect the parts and fitting work your F16 needs. Identify the suspension on your X6, then have the listed BC Racing kit checked against the car before ordering.

Which X6 F16 do you have?1 listed kit · 1 brandReviewed 20 November 2026

F16 suspension equipment to identify

Tell the workshop what you want to change about the X6. If it has started sitting unevenly or riding badly, have the existing suspension inspected first. Include any conversion or other work a previous owner has carried out.

Discuss the height you want with the wheels and tyres fitted to the car. The workshop also needs to know about the passengers and luggage you usually carry, and any towing use, so it can assess travel and clearance for that load.

BMW introduced the second-generation X6 in 2014. Its global launch specification describes rear air suspension and Dynamic Damper Control in the Comfort and Adaptive M packages, with Adaptive M standard on the M50d in that specification. The Professional package combines Comfort and Dynamic equipment. Check the build record and the suspension fitted to your car now.

The listed BC Racing I-74 application names AWD X5/X6 F15/F16 and 2014-2018. The shared X5/X6 reference still needs checking against your X6's engine, build date and factory equipment. Ask the supplier whether a suitable kit is available for a later car or an F86 X6 M.

Start with your X6 F16.

Confirm the chassis, year and existing suspension before choosing your setup.

Grey BMW X6 F16 viewed from the rear on silver multispoke wheels

F16 xDrive within the listed 2014-2018 application

Send the engine, build date and suspension specification for an I-74 BR RS check. Identify rear air springs and electronic dampers, including any previous changes. For air-to-coil work, BC specifies rear upper spring pad 33536857006; confirm its inclusion, the complete conversion parts and the treatment of affected factory functions.

Check my F16 application

Plan the setup around how you use the X6

Have the application and conversion parts confirmed first. Then agree the spring specification and finished height with the workshop, including the loads, tyres and roads the car will use.

Selected configurationSee optionsinc. VAT · I-74 BR RS, subject to an exact-car check

Agree a height with enough travel and tyre clearance for your usual load.

Read the buying advice

Consider I-74 BR RS after the supplier has checked the application and quoted all the required parts. If the X6 has rear air springs, include the conversion work and ask how replacing them will affect self-levelling. Have the fitter check the finished height with your actual wheels and tyres.

  • Confirm the factory suspension
  • Include conversion parts and fitting
  • Check clearance with normal loads
View current configurations

Give the builder the event plans and both road and circuit tyre specifications.

Read the buying advice

Ask the builder to assess whether the listed kit has the specification and travel your X6 needs for the intended use. Include its running weight and any wheel changes. Agree initial settings, inspection intervals and damper servicing before the car attends an event.

  • Describe the intended events
  • Supply the weight and tyre details
  • Agree inspections and servicing
Discuss road and circuit use for my F16

Major weight or tyre changes need a suspension specification agreed for the build.

Read the buying advice

Provide the builder with the planned weight, tyres and chassis changes. Have mounting loads, travel and damper requirements assessed together, then establish whether a listed kit is suitable. Confirm the parts and setup before buying; the spring rates in a road-car listing cannot settle that decision.

  • Provide the planned build specification
  • Have mounting and travel assessed
  • Confirm suitability before buying
Discuss my F16 circuit project

Plan the rear air-to-coil work

Conceptual suspension layout

The air-equipped F16 has a rear air spring in a separate seat from the damper. The spring carries the load and the damper controls movement. Have the workshop identify what is fitted now, particularly if the X6 has already been converted.

BC's I-74 application requires rear upper spring pad 33536857006 for an air-to-coil conversion. Ask whether it is supplied and get the rest of the required parts itemised. Agree what will happen to self-levelling, electronic damping and any other affected suspension functions.

Use the instructions for the exact BC kit to establish the spring mounting and height adjustment. ZF's F16 document covers replacement air springs; it does not establish the parts or procedure for fitting the BC conversion.

Read about ride height and spring preload
Silver BMW X6 F16 parked on its wheels beside an independent workshop with a mechanic nearby

Get the fitting work included in the quote

Ask the workshop to inspect the existing suspension and identify the mounts and other parts it will retain or replace. If the car has rear air springs or electronic dampers, have the conversion and factory-system work explained alongside the kit and fitting costs.

Supply the wheel widths, offsets, tyre sizes and any spacer details. Agree a usable height, have steering and suspension clearance checked, and complete the alignment once the height is set. Include the follow-up inspection your fitter recommends.

Wheel and tyre clearance

Supply the width, offset and tyre size at each axle, plus any spacers. Have the fitter check the arches, liners and suspension through steering and suspension movement. A parked side view cannot establish clearance when the car is loaded or moving.

Factory suspension functions

Identify electronic dampers, rear self-levelling and any other suspension equipment before agreeing replacement parts. Ask which functions the proposed work will change and how the workshop will handle them. Include earlier suspension conversions in that discussion.

Height and carried load

Tell the fitter about regular passengers, luggage and towing before agreeing the springs and height. Have travel and tyre clearance assessed for that use, then align the car at its finished height.

Wear and future servicing

Have worn joints, bushes and mounting parts assessed while the work is being planned. Keep the final settings and replacement-part details with the car. Agree inspection and damper servicing with the workshop, including any extra checks for event use.

The current X6 F16 range.

See the controls and hardware in the listed kit.

BC Racing

The listed I-74 BR RS specification has 9 kg/mm springs front and rear. BR uses a combined compression and rebound control and is rebuildable. Confirm the ordered rates, mounts and conversion contents with the supplier, then have the workshop assess the specification for your X6's equipment and use.

View BC Racing X6 F16 kits

Find your X6 F16 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All X6 F16 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All X6 F16 kit links and part numbers

Before you order.

  1. Identify your car

    Send the X6's engine and build details. Flag a later car, F86 X6 M or any mismatch with the listed AWD 2014-2018 application for a separate check.

  2. Match the kit

    Identify the suspension fitted now, including rear air springs and electronic dampers. Include any previous conversion or other chassis changes.

  3. Check what’s included

    Agree the I-74 specification and complete parts list. For air-to-coil work, confirm pad 33536857006 and the treatment of affected factory functions.

  4. Check your modifications

    Provide wheel widths, offsets, tyre sizes and spacers. Explain the normal load and intended use before agreeing the height.

  5. Plan fitting

    Include fitting, clearance checks, alignment and a follow-up inspection in the quote. Confirm current availability and delivery when ordering.

Questions about BMW X6 F16 coilovers.

Check the details before choosing your kit.

Which coilover kit is listed for the F16 X6?

The current listing is BC Racing I-74 BR RS for AWD X5/X6 F15/F16, labelled 2014-2018. Ask for an exact-car check using the engine, build date and suspension equipment. The shared chassis reference does not establish suitability for every X6 specification.

What should I check on an M50d?

BMW's global F16 launch specification describes Adaptive M suspension as standard on the M50d, including rear air springs and Dynamic Damper Control. Have the equipment on your car verified, then agree the kit, conversion parts and treatment of affected functions before ordering.

Which extra part does BC specify for air-to-coil work?

BC's I-74 application requires rear upper spring pad 33536857006. Confirm whether the pad is supplied and ask for every other part needed for your car. The pad reference alone does not establish a complete conversion package.

Will the factory electronic suspension still work?

Retention of the factory functions is not established by the kit listing. Have the supplier and fitter identify the equipment on your X6 and explain what the change will affect. Agree the physical parts and electronic work before choosing the kit.

Which spring rates are listed for I-74?

The shop lists 9 kg/mm front springs and 9 kg/mm rear springs. Confirm the ordered specification and have it assessed for the car's equipment, load and intended use. Those figures alone cannot predict the ride or confirm compatibility.

What wheel details does the fitter need?

Give the width, offset and tyre size at each axle, including any spacers. Have clearance checked through steering and suspension movement at the proposed height and expected load. Include alignment after the height has been set.

Does this listing cover an X6 M or a later F16?

The listed application names AWD F15/F16 and 2014-2018. It does not establish F86 X6 M coverage or extend the kit's dates to later cars. Send the chassis, engine and build details so the supplier can check whether a suitable kit is available.

Are compression and rebound adjusted separately on BR?

BR uses a combined compression and rebound adjustment. Follow the instructions for the exact kit and agree initial settings with the fitter.

Let’s talk suspension.

Send us the X6's engine, build details and current suspension specification, plus any earlier changes. Include the wheels and tyres, the usual load and what you want to improve. We can help check the listed application and the fitting questions to settle with your workshop.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.