
BMW Z4 E85/E86.
The coilover guide.
Shop the coiloversSeparate the Z4 M from the ordinary roadster and coupe first. Then choose a kit by its rear spring layout, and set the height around tyre clearance and usable suspension travel.
Z4 E85/E86 history and suspension
The first Z4 comes as the E85 roadster and, from 2006, the E86 coupe. Both were also built as Z4 M models with the M3's S54 engine. Several kits are listed only for the M cars, and some non-M references exclude them. Give the supplier the body, engine and build date before comparing prices.
The standard rear spring sits separately from the damper. Some kits keep that layout, and others move the spring onto the rear damper. Find out which arrangement the kit uses and what its mounts need before booking fitting.
BMW built the first Z4 at Spartanburg in the United States from September 2002 to November 2008. It replaced the Z3 roadster. The E86 coupe joined in 2006 and was only offered with six-cylinder engines. The roadster was followed by the E89 Z4, which uses different parts, so its kits belong in a separate guide.
The Z4 has MacPherson struts at the front and a multi-link rear axle, where the Z3 used semi-trailing arms. The Z4 M Roadster was shown in October 2005 and the M Coupe at Geneva in March 2006. Both use the S54 engine from the E46 M3, and BMW M changed the running gear to suit. Treat M and non-M cars as separate applications when you compare kits.
Many of these cars are now old enough for worn bushes and mounts to matter. Before choosing the finished height, have the workshop check the bushes, top mounts, subframe mounts and surrounding bodywork. Include any repairs in the fitting plan.
Start with your Z4 E85/E86.
Match the model year, drivetrain and body style before comparing brands.

E85 roadster
BC lists I-12 for 2002-2008 Z4s, and SPAX lists RSX111 and RSX3-222 for the roadster without the M models. Several AST references are shared with the E46 3 Series and list the E85 alongside it. Give the supplier the engine, build date and any suspension changes, and ask it to confirm the part reference and rear spring layout for that car.
Check my Z4 roadster
E86 coupe
BC's I-12 names both E85 and E86, and AST's shared references list the Z4 Coupe E86. SPAX's listing excludes the M Coupe but does not name the non-M coupe directly, so have SPAX confirm it before choosing RSX111 or RSX3-222. Order against the coupe body, engine and VIN.
Check my Z4 coupe
Z4 M Roadster or M Coupe
BC lists I-22 for the 2006-2008 Z4 M under E85; ask BC to confirm the M Coupe. AST lists ACC-B2203SD, RIV-B1010SD and RAC-B1010SD for both Z4 M bodies, and MOTON lists three Z4 M kits. The SPAX listings exclude both M models. Confirm the body, build date and current suspension before ordering.
Check my Z4 M applicationChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, mounts, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists the I-12 BR RA option with pillowball front and rubber rear mounts for non-M cars. Have the application checked before ordering.
Read the buying advice
The I-12 BR RA is a possible starting point for a road Z4 once the supplier has confirmed fitment. BC gives default rates of 5 kg/mm front and 8 kg/mm rear. Agree a height that clears your wheels and leaves room for the suspension to compress over bumps. Ask the fitter which parts it will reuse or replace, and follow the kit's instructions for setup.
- Confirm the body and engine
- Leave room for suspension movement
- Include mounts and alignment
AST describes ACT-B1101SD as NCO, so the rear spring stays separate from the damper. Check the application and supplied mounts for your Z4.
Read the buying advice
ACT-B1101SD is an inverted kit with front top mounts and a non-coilover rear. Discuss spring rates and starting damper settings with the supplier for your roads and circuit days. If you use different wheels for events, supply both tyre specifications. Include alignment at the final ride height in the fitting plan.
- Check the separate rear spring hardware
- Provide road and circuit tyre details
- Agree rates and starting settings
Confirm the Z4 M application, rear spring layout and damper specification with the manufacturer before ordering.
Read the buying advice
AST's RIV-B1010SD and RAC-B1010SD are described as rear coilover kits with two-way and three-way adjustment on remote reservoirs. MOTON lists one-, two- and three-way Z4 M kits. Choose how many adjustments you will actually use, then agree spring rates, valving and mounting parts for the car. Include starting settings and servicing in that discussion, and confirm delivery timing before booking fitting.
- Confirm the exact Z4 M application
- Check the rear spring layout
- Agree the build and delivery timing
Check where the rear spring carries the load
On a standard BMW Z4, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.A standard Z4 E85/E86 has a multi-link rear axle with the coil spring mounted separately from the damper. The spring supports the car through its own seats; the damper controls suspension movement. Identify what is fitted now, especially on a car with previous suspension work.
A non-coilover or separate-spring kit keeps those positions. A true rear coilover puts the spring around the damper, so the damper mounting points also carry the spring load. AST's descriptions mark several Z4 references as CO, meaning rear coilover. Have the manufacturer and fitter assess the mounts and any reinforcement needed. A top-mount plate alone does not establish that the conversion suits the car.
Spring rates only compare like with like. A rate quoted for a separate rear spring acts at a different point from one fitted around the damper, so the same number does not give the same stiffness at the wheel. Agree rates with the supplier for the layout you are buying, and check the alignment at the final ride height.
Read about ride height and spring preload
Inspect the car before setting the height
Give the workshop the kit reference and rear spring layout before it orders fitting parts. Have it inspect the rear subframe and trailing arm bushes, the top mounts and the surrounding bodywork. Establish which parts the kit supplies and which the workshop will reuse or replace, and ask for a written list.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings. Follow the kit manufacturer's instructions for later checks.
Inspect the bushes and mounting areas
Have the workshop inspect the rear subframe and arm bushes, spring seats, top mounts and damper mounting areas. Replace worn parts and agree any bodywork repairs before fitting the suspension. A true rear coilover also needs the manufacturer's assessment of how its spring load reaches the car through the damper mounts.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters. Repeat the check with any separate event wheels.
Leave travel for normal use
Tell the workshop about your usual roads and the luggage or passengers the Z4 carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted. Set the spring platforms using that kit's instructions.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded. If the alignment cannot reach the agreed figures, ask the specialist what hardware is needed; damper adjustment will not correct it.
The current Z4 E85/E86 range.
Compare the controls and hardware included in each range.
I-12 is listed for 2002-2008 Z4s under E85/E86, and I-22 for the 2006-2008 Z4 M under E85. Both offer BR RA and RM MA options, with default rates of 5 kg/mm front and 8 kg/mm rear. Ask BC to confirm the M Coupe for I-22, and check the supplied mounts and rear hardware for your car.
View BC Racing Z4 E85/E86 kitsACC-B2203SD, RIV-B1010SD and RAC-B1010SD are listed for the Z4 M Roadster and M Coupe. The B1101 and B1106 references are shared with the E46 and list the non-M Z4. AST's descriptions mark ACT-B1101SD as NCO and ACC-B1106SD, ACC-B2203SD and RIV-B1101SD as rear CO; confirm the layout of the others. ACS-B1101SD needs its series confirmed: its set description says 4100, while the shop lists it as 5100 Street.
View AST Z4 E85/E86 kitsMOTON lists three Z4 M kits: M 505 178SD 1-Way Clubracer, M 505 112SD 2-Way and M 505 110SD 3-Way, all for the M Roadster and M Coupe. They do not cover the non-M Z4. Confirm the rear layout, spring rates and valving with the supplier, and agree delivery timing before booking fitting.
View MOTON Z4 E85/E86 kitsRSX111 has adjustable damping and RSX3-222 has separate bump and rebound adjustment. Both are listed for 2003-2008 Z4s without the M Roadster or M Coupe, with 35-65 mm of lowering front and rear. Those figures depend on the car's original suspension. Have SPAX confirm the non-M coupe, engine and build date.
View SPAX Z4 E85/E86 kitsFind your Z4 E85/E86 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
16 listings
Selected application: All Z4 E85/E86 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

AST · ACS-B1101SD
AST 5100 Street Coilovers for BMW E46 / E85 / E86 - ACS-B1101SD
Check the exact application
![BC Racing Coilovers - BMW Z4 (02-08) [E85/E86]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-12
BC Racing Coilovers - BMW Z4 (02-08) [E85/E86]
Check the exact application

SPAX · RSX3-222
SPAX RSX Double Adjustable Coilover Kit for BMW Z4 Z85 (excl. M Roadster; M Coupe) - RSX3-222
Check the exact application

MOTON · M 505 112SD
MOTON 2-Way Motorsport Coilovers for BMW E85 / E86 - M 505 112SD
Check the exact application

AST · RAC-B1101SD
AST 5300 3-Way Motorsport Coilovers for BMW E46 / E85 / E86 - RAC-B1101SD
Check the exact application
![BC Racing Coilovers - BMW Z4 M (06-08) [E85]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-22
BC Racing Coilovers - BMW Z4 M (06-08) [E85]
Check the exact application
All Z4 E85/E86 kit links and part numbers
- BC Racing · BCR-I-12: BC Racing Coilovers - BMW Z4 (02-08) [E85/E86]
- BC Racing · BCR-I-22: BC Racing Coilovers - BMW Z4 M (06-08) [E85]
- AST · ACC-B1106SD: AST 5100 Clubracing Coilovers for BMW E46 / E85 / E86 - ACC-B1106SD
- AST · ACC-B2203SD: AST 5100 Clubracing Coilovers for BMW E85 / E86 - ACC-B2203SD
- AST · ACS-B1101SD: AST 5100 Street Coilovers for BMW E46 / E85 / E86 - ACS-B1101SD
- AST · ACT-B1101SD: AST 5100 Street Performance Coilovers for BMW E46 / E85 / E86 - ACT-B1101SD
- AST · ACU-B1101SD: AST 5100 Street Coilovers for BMW E46 / E85 / E86 - ACU-B1101SD
- AST · RAC-B1010SD: AST 5300 3-Way Motorsport Coilovers for BMW E85 / E86 - RAC-B1010SD
- AST · RAC-B1101SD: AST 5300 3-Way Motorsport Coilovers for BMW E46 / E85 / E86 - RAC-B1101SD
- AST · RIV-B1010SD: AST 5200 2-Way Motorsport Coilovers for BMW E85 / E86 - RIV-B1010SD
- AST · RIV-B1101SD: AST 5200 2-Way Motorsport Coilovers for BMW E46 / E85 / E86 - RIV-B1101SD
- MOTON · M 505 110SD: MOTON 3-Way Motorsport Coilovers for BMW E85 / E86 - M 505 110SD
- MOTON · M 505 112SD: MOTON 2-Way Motorsport Coilovers for BMW E85 / E86 - M 505 112SD
- MOTON · M 505 178SD: MOTON 1-Way Clubracer Coilovers for BMW E85 / E86 - M 505 178SD
- SPAX · RSX111: SPAX RSX Coilover Kit for BMW Z4 Z85 (excl. M Roadster; M Coupe) - RSX111
- SPAX · RSX3-222: SPAX RSX Double Adjustable Coilover Kit for BMW Z4 Z85 (excl. M Roadster; M Coupe) - RSX3-222
Before you order.
Identify your car
Send the body, engine, build date and VIN, including whether it is a Z4 M and details of any previous suspension changes.
Match the kit
Confirm the full kit reference for your car. Check that it covers your body, engine and build date, and identify the supplied rear spring arrangement.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any inspection, repairs and reinforcement the kit manufacturer specifies. Confirm delivery timing before reserving workshop time.
Questions about BMW Z4 E85/E86 coilovers.
Check the details before choosing your kit.
Do the same coilovers fit the Z4 roadster and coupe?
Some references list both. BC's I-12 names E85 and E86, and AST's shared references list the Z4 Convertible E85 and Coupe E86. SPAX does not name the non-M coupe directly. Supply the VIN and body details for the application check.
Can I fit a standard Z4 kit to a Z4 M?
Not without the manufacturer confirming it. The Z4 M has its own listed kits from BC, AST and MOTON, and the SPAX listings exclude it. Order against the M application, and give the body and build date.
Why are some AST kits listed for the E46 as well?
AST lists several references for both the E46 3 Series and the non-M Z4. That listing comes from AST's application table. It does not make every E46 kit suitable for a Z4, so check the exact reference and rear layout for your car.
What does NCO or CO mean in an AST description?
NCO means the rear spring stays separate from the damper, as on the standard car. CO means the kit uses a rear coilover, with the spring around the damper. Confirm the layout and any mounting work with AST and the fitter.
Does a true rear coilover need reinforcement?
The manufacturer and fitter need to assess the exact kit and car. Moving the spring to the damper changes where its load enters the body. A supplied top mount does not establish that the surrounding bodywork can carry that load.
Do E89 Z4 kits fit the E85 or E86?
No listing here suggests that. The E89 that followed in 2009 uses different parts and has its own kit references. Use the E85/E86 application for a 2002-2008 car.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. Allow for your usual roads and loads, then check the alignment at that height. A lowering range shows the adjustment available, not a target for every Z4.
When should I book fitting for a kit on backorder?
Agree the specification and delivery timing with the supplier first. Many of the AST, MOTON and SPAX options are listed on backorder without a dated arrival. Book fitting and alignment once the parts and their timing are agreed.
Let’s talk suspension.
Send the Z4's body, engine, build date and current suspension details. Include the kit reference and rear arrangement you are considering so the application and fitting parts can be checked together.






