Red BMW Z4 G29 with its soft-top folded down, lightly lowered on dark wheels beside a Highland loch

BMW Z4 G29.
The coilover guide.

Shop the coilovers

Find out whether the car has electronically controlled dampers first, because some kits are made for that system and others exclude it. Then choose by how you drive.

Which Z4 G29 do you have?8 listed kits · 4 brandsReviewed 21 November 2026

Z4 G29 history and platform

The G29 Z4 is a soft-top roadster sold as the sDrive20i, sDrive30i and M40i. The listed kits cover all three, but they split by the factory dampers: Eibach makes one kit for cars without electronic damper control and another for cars with it, and AST lists both versions.

Check the car's options list or VIN data before comparing prices. The answer decides which reference to order and whether the kit includes a unit to stop the factory system showing a fault.

BMW revealed the third Z4 at the Paris Motor Show in October 2018, with sales from March 2019. Magna Steyr built it in Graz, Austria, alongside the Toyota GR Supra, which shares its underlying architecture. Unlike the E89 before it, the G29 returned to a fabric roof.

The shared platform explains why Eibach lists the same Pro-Street S references for the Z4 and the Supra. A shared listing does not make every Supra part suitable for a Z4, so order against the Z4 application and engine.

Some G29s have electronically controlled dampers and some do not. A coilover kit with manually adjusted dampers replaces that system, so ask the supplier how the kit handles the factory wiring, warning lights and driving modes.

Start with your Z4 G29.

Match the model year, drivetrain and body style before comparing brands.

White BMW Z4 G29 with its black soft-top raised, parked beside a hedgerow on a country lane

Without electronic dampers

Eibach lists PSS65-20-046-01-22 for G29s without electronic suspension, and AST lists ACC-B2601S for non-EDC cars. BC lists I-97 for 2019-on Z4s. Give the supplier the engine, build date and options list, and ask it to confirm the part reference and supplied mounts.

Check my Z4 G29
Dark blue BMW Z4 G29 with its roof down and black wheels, parked outside a modern workshop

With electronic damper control

Eibach's PSS65-20-046-02-22 is for cars with electronic damper control and includes a PRO-TRONIC unit to suppress the fault message; the adjustable damping modes no longer work. AST also lists ACC-B2601S for EDC cars. Nitron's elec-TRON kits keep electronic damping. Ask the supplier what each route means for your car.

Check my electronic-damper car
Grey BMW Z4 G29 with its soft-top raised, parked in front of closed circuit pit garages

Track days and events

BC's I-97 is listed in BR, RM, ER and ZX forms, AST's ACC-B2601S is a Clubracing kit, and Nitron lists R1 and R3 in Road or Track specification. Tell the supplier about the tyres, circuits and how often the car runs, and ask it to confirm rates and starting settings.

Check my track Z4

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · I-97 BR RA, subject to an application check

BC lists I-97 BR RA with a pillowball front and rubber rear mount. Have the application and factory dampers checked before ordering.

Read the buying advice

The I-97 BR RA is a possible starting point for a road G29 once the supplier has confirmed fitment. BC gives default rates of 5 kg/mm front and 10 kg/mm rear, with height adjusted separately from spring preload. Ask BC how the kit treats a car with electronic dampers, and agree a height that leaves room for the suspension to compress.

  • Confirm the engine and options
  • Leave room for suspension movement
  • Include mounts and alignment
View current configurations
Selected configurationSee optionsinc. VAT · Eibach Pro-Street S for EDC cars, subject to an exact-car check

Eibach's -02-22 reference is for cars with electronic damper control and includes a PRO-TRONIC unit. Confirm the car has that system first.

Read the buying advice

Eibach lists PSS65-20-046-02-22 for G29s with series electronic damper control. The supplied PRO-TRONIC unit suppresses the error message after fitting, and the electronic damping function no longer applies. Both Eibach references list 30-50 mm adjustment front and rear and axle-load limits of 865 kg front and 995 kg rear. Some cars may need extra original parts for installation.

  • Confirm electronic damper control
  • Check the axle-load limits
  • Ask which original parts are needed
View current configurations
Selected configurationSee optionsinc. VAT · AST ACC-B2601S, subject to an exact-car check

AST lists ACC-B2601S with front and rear top mounts, for EDC and non-EDC cars. Confirm the version and settings for your car.

Read the buying advice

ACC-B2601S is an inverted Clubracing kit with rebound and ride-height adjustment, supplied with front and rear top mounts. It is made to order, and the supplier currently advises about four weeks, which can change. Agree spring rates and starting settings for your circuits, and supply both tyre specifications if you use separate event wheels.

  • Confirm EDC or non-EDC
  • Provide road and circuit tyre details
  • Agree settings and delivery timing
View current configurations

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard BMW Z4 G29, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The G29's rear coil spring sits separately from the damper. Eibach's note that the rear height is set on a separate adjustable unit reflects that layout, and Nitron offers a Divorced option that keeps it.

Nitron also offers a Coilover rear, which puts the spring around the damper. The damper mounts then carry the spring load as well. Ask the manufacturer and fitter what that conversion requires before choosing it.

Spring rates only compare like with like. A rear spring mounted away from the damper acts at a different point on the suspension, so its rate does not translate directly into stiffness at the wheel. Agree rates with the supplier for the layout you are buying, and check the alignment at the final ride height.

Read about ride height and spring preload
Yellow BMW Z4 G29 with its roof down, standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with electronic damper control, agree in advance how the factory damper wiring will be handled and whether a fault-suppression unit is supplied. Ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings. Follow the kit manufacturer's instructions for later checks.

Check the factory damper system

Confirm from the options list or VIN data whether the car has electronic damper control. It decides which Eibach reference applies and what the fitter must do with the factory wiring. Settle that with the supplier before ordering.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters. Repeat the check with any separate event wheels.

Leave travel for normal use

Tell the workshop about your usual roads and the luggage the Z4 carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted. Set the spring platforms using that kit's instructions.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded. If the alignment cannot reach the agreed figures, ask the specialist what hardware is needed; damper adjustment will not correct it.

The current Z4 G29 range.

Compare the controls and hardware included in each range.

BC Racing

I-97 is listed for 2019-on Z4s under G29, in BR, RM, ER and ZX forms. BC gives default rates of 5 kg/mm front and 10 kg/mm rear, and the BR series has 30-way rebound adjustment. Ask BC how the kit treats electronic damper control, and check the supplied mounts for your car.

View BC Racing Z4 G29 kits

Eibach

PSS65-20-046-01-22 excludes electronic suspension systems. PSS65-20-046-02-22 is for cars with electronic damper control and includes a PRO-TRONIC unit. Both list the sDrive20i, sDrive30i and M40i from November 2018, with 30-50 mm adjustment and the same axle-load limits. The same references also cover the Toyota Supra.

View Eibach Z4 G29 kits

AST

ACC-B2601S is a 5100 Clubracing kit with front and rear top mounts. Its application table lists the G29 both with and without EDC, from 2018. It is made to order, so confirm the version for your car and the delivery timing before booking fitting.

View AST Z4 G29 kits

Nitron

Nitron lists R1 and R3 kits for the sDrive20i, sDrive30i and M40i, plus elec-TRON versions that keep electronically controlled damping. Each offers Road or Track use and a Coilover or Divorced rear. Confirm the control interface, factory equipment and any extra hardware with Nitron. All four are supplied to order.

View Nitron Z4 G29 kits

Find your Z4 G29 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

8 listings

Selected application: All Z4 G29 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 8 shown
All Z4 G29 kit links and part numbers

Before you order.

  1. Identify your car

    Send the engine, build date, VIN and options list, including whether the car has electronic damper control and any previous suspension changes.

  2. Match the kit

    Confirm the full kit reference for your car, including the EDC or non-EDC version where the manufacturer lists both.

  3. Check what’s included

    Ask for a written list of the mounts, springs, electronic parts and fitting parts supplied with the kit. Confirm which existing parts will be reused.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including any wiring work. Confirm delivery timing before reserving workshop time.

Questions about BMW Z4 G29 coilovers.

Check the details before choosing your kit.

How do I know if my Z4 G29 has electronic dampers?

Check the options list or VIN data, or ask a BMW dealer to read it. The answer decides which Eibach reference applies and how the fitter handles the factory wiring.

What happens to the driving modes after fitting coilovers?

With Eibach's -02-22 kit, the PRO-TRONIC unit suppresses the fault message and the electronic damping function no longer applies. Other kits may handle it differently, so ask the supplier for the specific kit.

Can I keep electronic damping with coilovers?

Nitron lists elec-TRON R1 and R3 kits for the G29 that use electronically controlled damping. Confirm the control interface and factory equipment with Nitron before ordering.

Do Toyota Supra kits fit the Z4?

Eibach lists the same Pro-Street S references for both cars, but that comes from Eibach's application table. Do not assume other Supra parts fit; order against the Z4 application.

Do E89 or E85 kits fit the G29?

No. Each Z4 generation has its own kit references. Use the G29 application for a 2019-on car.

What does Divorced mean on the Nitron kits?

Divorced keeps the rear spring separate from the damper, as on the standard car. Coilover puts the spring around the rear damper, so the damper mounts carry the spring load too.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. An adjustment range shows what is available, not a target for every Z4. Check the alignment at the final height.

When should I book fitting for a made-to-order kit?

Agree the specification and delivery timing with the supplier first. The AST, Eibach and Nitron options are listed on backorder or made to order. Book fitting and alignment once the parts and their timing are agreed.

Let’s talk suspension.

Send the Z4's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application, fitting parts and any electronic damper work can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.