Grey original-generation BYD Qin Plus DM-i saloon with silver multi-spoke wheels at a stone-walled country viewpoint

BYD Qin Plus DM-i FWD (2021 generation).
The coilover guide.

Shop the coilovers

BC lists ZP-08 for Qin Plus DM-i FWD from 2021. Check the generation, rubber mounting package and hybrid underbody clearance before choosing a running height.

Which Qin Plus DM-i FWD (2021 generation) do you have?1 listed kit · 1 brandReviewed 15 November 2026

A plug-in hybrid saloon introduced in 2021.

Give the car's build date, market specification and photographs of its existing suspension when asking about the BR RS package. This guide concerns the original 2021-generation front-wheel-drive plug-in hybrid. A later car with the same name needs its own application check.

Describe the roads, usual passengers and luggage, and any circuit plans. Have a workshop familiar with this hybrid assess the proposed height, available travel and underbody clearance. There is one listed kit; the driving choices help you discuss its suitability for your use.

BYD introduced Qin Plus DM-i in 2021 as part of its DM-i plug-in hybrid range. The original four-door saloon combines petrol and electric drive. It is distinct from the earlier Qin and Qin Pro, and from the battery-electric Qin Plus EV.

BYD's regional Qin Plus DM-i catalogue, with specifications dated August 2021, identifies front-wheel drive, MacPherson front suspension and a torsion-beam rear. Its equipment and performance figures concern that market; they do not establish the specification of every car carrying the name.

BC's application list identifies ZP-08 for Qin Plus DM-i FWD, 2021 onwards, in BR RS specification. Confirm the build and fitted hardware against that kit. The open-ended date in the list does not establish coverage for every later generation or renamed export model.

Start with your Qin Plus DM-i FWD (2021 generation).

Confirm the chassis, year and existing suspension before choosing your setup.

White original-generation BYD Qin Plus DM-i on graphite multi-spoke wheels outside a brick workshop

Original Qin Plus DM-i FWD: check ZP-08

Send the build date, market specification and suspension photographs, including any earlier changes. BC identifies ZP-08 as BR RS for Qin Plus DM-i FWD, 2021 onwards. Check that exact assembly against the car before ordering.

Check my Qin Plus DM-i application

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Plan around passenger loads, rough roads and underbody clearance.

Read the buying advice

Tell the workshop about your normal passengers, luggage, speed humps and parking entrances. Ask it to assess the battery area and other low underbody parts at the proposed height, alongside working travel and tyre clearance. Include the condition of retained mounting parts and final alignment in the fitting budget.

  • Describe usual passengers and luggage
  • Check travel and underbody clearance
  • Budget for mounts and final alignment
Plan my Qin Plus DM-i road setup

Give the workshop both wheel specifications and the intended use.

Read the buying advice

Provide both wheel and tyre specifications if you change them for circuit days. Have the workshop consider the car's loads, working travel and underbody protection when discussing springs and damping. Check the venue's requirements for the car, and record the alignment and starting settings before making later changes.

  • List both wheel and tyre sets
  • Discuss springs, loads and travel
  • Check venue requirements for the car
Discuss my Qin Plus DM-i road and circuit use

Have the builder assess the complete car and intended events.

Read the buying advice

Describe changed suspension, tyres and other hardware before discussing the package. A builder familiar with the hybrid needs to assess the mounting arrangement, travel, clearance and vehicle systems together. The road-model application does not establish competition eligibility. Different springs or mounts require a separate enquiry.

  • Describe changed hardware and tyres
  • Assess the complete hybrid installation
  • Review the intended event requirements
Discuss my Qin Plus DM-i circuit project

The pictured rear spring sits beside the damper.

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

A firsthand inspection of a 2021-model Qin Plus DM-i shows separate rear springs and dampers.

Component layout only. Mounts, dimensions and adjusters vary by kit.

A firsthand inspection of a 2021-model Qin Plus DM-i shows the coil springs inboard of separate rear dampers on the torsion-beam arrangement. The same article compares older Qin models with different rear hardware, so check the arrangement on your car.

Confirm the rear springs, seats, dampers and mounting parts supplied for ZP-08. Where the kit provides separate spring-seat and damper adjustments, follow its own instructions. Have the fitter check spring retention and available travel through the suspension's movement at the agreed height.

Read about running height and spring preload
Mechanic kneeling with a hand torch beside the front wheel of a grey Qin Plus DM-i standing on a workshop floor

Use a workshop familiar with the hybrid.

Include the existing mounts, rear spring seats and damper fixings in the inspection. The shop lists BR RS with rubber top mounts. Confirm exactly which front and rear parts the supplied assembly includes or reuses, and assess worn parts before fitting.

The original owner's manual cautions that suspension, tyre and chassis changes can affect airbag operation. Have a workshop familiar with the car assess the proposed changes, battery-area clearance and required vehicle checks. Work involving high-voltage components needs appropriately qualified personnel.

Rubber mounts and retained parts

Check the exact RS mounting package, including front bearings, rear fixings and any parts retained from the car. Have their condition assessed before agreeing which parts can be reused.

Rear spring seats and beam bushes

Identify any changed springs, seats or dampers already fitted. Have the workshop inspect the spring supports, damper mountings and beam bushes, then check spring retention and working travel with the supplied assembly.

Wheels, tyres and underbody clearance

Give wheel widths, offsets, tyre sizes and spacer thicknesses. Include normal loads when checking steering and suspension clearance. Have the workshop assess low underbody parts, including the battery area, before settling on a running height.

Alignment and vehicle checks

Include final alignment once the height is settled. Ask which checks the suspension and tyre changes require on this car, and keep the measurements and damper settings with its service record.

The current Qin Plus DM-i FWD (2021 generation) range.

See the controls and hardware in the listed kit.

BC Racing

The shop lists one Qin Plus DM-i BR RS application, BCR-ZP-08, with default spring rates of 4.5 kg/mm front and 4.3 kg/mm rear. BC identifies ZP-08 for Qin Plus DM-i FWD, 2021 onwards, and describes BR as combined compression and rebound adjustment. Confirm the rubber mounting package and supplied parts against the exact car.

View BC Racing Qin Plus DM-i FWD (2021 generation) kits

Find your Qin Plus DM-i FWD (2021 generation) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Qin Plus DM-i FWD (2021 generation) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Qin Plus DM-i FWD (2021 generation) kit links and part numbers

Before you order.

  1. Identify your car

    Give the build date and market specification; identify the original 2021-generation Qin Plus DM-i FWD.

  2. Match the kit

    Check ZP-08 against the car's fitted hardware. Earlier Qin models, Qin Plus EV and later changed generations need separate evidence.

  3. Check what’s included

    Agree the supplied springs, seats, dampers and rubber mounting parts, including anything retained from the car.

  4. Check your modifications

    Provide wheel, tyre and spacer measurements; plan travel and battery-area clearance checks with usual loads.

  5. Plan fitting

    Use a workshop familiar with the hybrid, include final alignment and required vehicle checks, and confirm availability before booking.

Questions about BYD Qin Plus DM-i FWD (2021 generation) coilovers.

Check the details before choosing your kit.

Which Qin Plus DM-i application is listed?

BC identifies ZP-08 for Qin Plus DM-i FWD, 2021 onwards, in BR RS specification. This guide concerns the original 2021 generation. Give the build date, market specification and existing hardware when checking the supplied package.

Does this cover Qin, Qin Pro or Qin Plus EV?

Those names identify different applications. The listing here is BCR-ZP-08 for Qin Plus DM-i FWD. Earlier Qin models, Qin Pro, Qin Plus EV, Qin L and renamed export models need their own application evidence.

Does the 2021-onwards listing cover every later car?

The date in the BC list does not establish that every later generation uses the same hardware. Confirm the build, market specification and fitted suspension against ZP-08 before ordering for a newer car.

Are the rear springs separate from the dampers?

A firsthand inspection of a 2021-model Qin Plus DM-i shows separate coil springs and dampers on its torsion-beam rear. Check the arrangement on your car and confirm the rear parts supplied with ZP-08. Follow the instructions for that assembly.

What does the RS mounting description mean here?

The shop lists BR RS with rubber top mounts. Confirm the exact front and rear mounting parts, bearings and fixings included in the supplied package, and identify anything that will be retained from the car.

Which spring rates are listed?

The listed defaults are 4.5 kg/mm front and 4.3 kg/mm rear. These are spring rates, not rates measured at the wheels. Confirm the supplied springs for the intended car and use; a different rate is a separate enquiry.

What damping adjustment does BR provide?

BC describes BR as combining compression and rebound adjustment. Use the instructions for the supplied assembly and record its starting settings. Ask the fitter to explain the front and rear height adjustments as well.

What should the fitting plan include for the hybrid?

Use a workshop familiar with the car. Include working travel, spring retention, wheel and tyre clearance, low underbody parts and the battery area in the assessment. Work involving high-voltage components needs appropriately qualified personnel.

Does BYD give advice about suspension changes?

The original owner's manual cautions that suspension, tyre and chassis changes can affect airbag operation. Discuss the proposed work with a workshop familiar with the car and ask which vehicle checks it requires. Include final alignment after settling the height.

Why do the three driving choices lead to enquiries?

They help you describe the loads, tyres and intended use to the fitter or builder. There is one listed kit here. The road, mixed-use and circuit choices are not separate priced suspension levels.

Let’s talk suspension.

Send your Qin Plus DM-i's build details, market specification, suspension photographs and wheel sizes. Include previous changes, normal loads and planned use.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.