Pale yellow-green original 2023 BYD Seagull on graphite multi-spoke wheels outside a dark industrial building

BYD Seagull FWD (2023 generation).
The coilover guide.

Shop the coilovers

BC Racing's BR RS kit gives the original Seagull adjustable ride height and damping. Choose a height you can use on your everyday roads, with enough clearance beneath the battery.

Which Seagull FWD (2023 generation) do you have?1 listed kit · 1 brandReviewed 15 November 2026

The small electric hatch introduced in 2023.

ZP-10 is listed for the original 2023-generation front-wheel-drive Seagull. Its BR damper adjusters change compression and rebound together. Discuss the amount you want to lower the car with the fitter, who can assess clearance and suspension travel with your usual passengers and luggage aboard.

Have tyre clearance checked as the wheels steer and the suspension moves, especially if you are changing wheels or adding spacers. Confirm which rubber mounting parts the RS package supplies or reuses.

BYD launched the Seagull in April 2023. The original five-door hatch is battery electric and front-wheel drive. BYD also uses the Dolphin Mini name in some markets; an export name alone does not identify the suspension fitted to a particular car.

BYD's regional brochures describe MacPherson front suspension and a torsion-beam rear. A chassis inspection of a 2023 Seagull shows each rear coil spring surrounding its damper.

BC lists Seagull FWD from 2023 as ZP-10 in BR RS specification. Check a later or imported car by its build details and existing hardware. The open-ended catalogue date does not establish coverage for every subsequent generation or renamed version.

Start with your Seagull FWD (2023 generation).

Confirm the chassis, year and existing suspension before choosing your setup.

Pale yellow-green original 2023 Seagull with graphite multi-spoke wheels parked outside a brick garage

Original Seagull FWD: check ZP-10

Give the build date and market specification, plus photographs of the existing suspension. BC lists ZP-10 as BR RS for Seagull FWD from 2023. Confirm the supplied assembly and rubber mounting parts against the actual car, including any previous changes.

Check my Seagull application

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Keep speed humps and loaded clearance in the plan.

Read the buying advice

Mention speed humps or steep entrances where the car already runs close to the ground. Have the battery area and other low parts checked at the proposed height with normal loads. Allow for worn mounting parts and final alignment in the fitting cost.

  • Describe speed humps and steep entrances
  • Check clearance with normal loads
  • Include mounts and final alignment
Plan my Seagull road setup

Discuss the intended events before deciding on springs and settings.

Read the buying advice

Give the workshop both wheel and tyre specifications if you change sets for a circuit day. Ask it to assess the electric car's loads, working travel and underbody protection together. Check the venue's requirements and keep a record of alignment and damper settings before making changes.

  • Provide both wheel and tyre sets
  • Discuss travel and underbody protection
  • Check the venue requirements
Discuss my Seagull road and circuit use

Have the builder assess the whole car for the intended events.

Read the buying advice

Describe the tyres, changed suspension and other hardware before discussing a kit. A builder familiar with the EV needs to assess the mounts, usable travel and vehicle systems. The road-model listing does not establish competition eligibility. Different springs or mounting parts need a separate enquiry.

  • Describe changed hardware and tyres
  • Assess the complete EV installation
  • Agree the event and mounting requirements
Discuss my Seagull circuit project

The rear spring surrounds the damper.

A spring surrounding a damperA fixed component diagram. The coil spring surrounds the shock absorber and rests on its spring seats. It does not show vehicle dimensions, mounting hardware or suspension movement.Coil springDamperSpring seat

The rear spring surrounds the damper on a standard 2023-generation Seagull.

Component layout only. Mounts, dimensions and adjusters vary by kit.

A chassis inspection of a 2023 Seagull shows each rear spring around its damper, with the lower fixing at the beam's trailing-arm area. Check that the parts on your car match before ordering ZP-10.

Confirm the rear units and mounting parts supplied with ZP-10. Follow that assembly's instructions for height and spring preload, then have the fitter check spring retention, available travel and clearance through the suspension's movement.

Understand ride height and spring preload
Original 2023 Seagull supported on a drive-on wheel alignment platform while a technician uses a nearby computer

Plan fitting with a workshop familiar with EVs.

The BR RS listing describes rubber top mounts. Agree which front and rear mounts, bearings and fixings come with the kit and which parts must be reused. Have the existing parts inspected before setting a fitting date.

Ask the workshop to assess the battery area and other low underbody parts before agreeing a finished height. Include wheel clearance through steering and suspension movement, followed by alignment once the height is settled. Any work involving high-voltage components needs appropriately qualified personnel.

Rubber mounts and retained parts

Check the exact RS mounting package, including front bearings and rear fixings. Identify any parts retained from the car and have their condition assessed before fitting.

Rear units and beam bushes

Show the fitter any previous spring or damper changes. Include the upper and lower unit mountings and beam bushes in the inspection, then check spring retention and available travel with the supplied assembly.

Wheels and battery-area clearance

Provide wheel widths, offsets, tyre sizes and spacer thicknesses. Check clearance as the wheels steer and the suspension moves, using normal loads. Include the battery area and other low parts when agreeing the height.

Alignment and a settings record

Set the final height before alignment. Ask which checks the changes require on this car, and keep the alignment measurements and damper settings with its service record.

The current Seagull FWD (2023 generation) range.

See the controls and hardware in the listed kit.

BC Racing

The shop lists one Seagull BR RS application, BCR-ZP-10, with default spring rates of 3.5 kg/mm front and 4 kg/mm rear. BC identifies ZP-10 for Seagull FWD from 2023. BR has 30 clicks of combined compression and rebound adjustment. Confirm the exact rubber mounting package and supplied springs for your car.

View BC Racing Seagull FWD (2023 generation) kits

Find your Seagull FWD (2023 generation) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Seagull FWD (2023 generation) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Seagull FWD (2023 generation) kit links and part numbers

Before you order.

  1. Identify your car

    Give the build date and market specification for the original 2023-generation Seagull FWD.

  2. Match the kit

    Check ZP-10 against the fitted suspension. Later generations and renamed export versions need their own application confirmation.

  3. Check what’s included

    Agree the supplied springs, dampers and rubber mounting parts, including anything retained from the car.

  4. Check your modifications

    Provide wheel, tyre and spacer measurements; arrange loaded clearance and suspension travel checks.

  5. Plan fitting

    Include final alignment, required vehicle checks and confirmed kit availability in the fitting plan.

Questions about BYD Seagull FWD (2023 generation) coilovers.

Check the details before choosing your kit.

Which Seagull coilover kit is listed?

BC identifies ZP-10 for Seagull FWD from 2023 in BR RS specification. The shop SKU is BCR-ZP-10. Confirm the build, market specification and fitted hardware against that assembly before ordering.

Does this also cover Dolphin Mini, Surf or ATTO 1?

BYD uses different model names in different markets, including Dolphin Mini for Seagull. A shared or related name is not enough to confirm the kit. Give the exact build and market specification, with photographs of the existing suspension, for a separate application check.

Does the 2023-onwards listing cover every later Seagull?

The open-ended date does not establish coverage for every later generation or specification. This guide concerns the original 2023-generation FWD car. Check newer hardware against ZP-10 before ordering.

Are the rear springs separate from the dampers?

On the inspected 2023 Seagull, each rear spring surrounds its damper on the torsion-beam arrangement. Confirm the units and mountings on your own car and check the rear parts supplied with ZP-10.

What does the RS mounting description mean?

The shop describes BR RS with rubber top mounts. Confirm the front and rear mounting parts, bearings and fixings included with the supplied assembly. Identify anything retained from the car and inspect it for wear before fitting.

Which spring rates are listed?

The published defaults are 3.5 kg/mm front and 4 kg/mm rear. These are spring rates, not rates measured at the wheels, and the figures alone do not establish handling balance. Confirm the supplied springs for your use; a different rate needs a separate enquiry.

What does the BR damper adjuster change?

BC describes 30 clicks of combined compression and rebound adjustment. Follow the instructions for the supplied units and record the starting settings. Have the fitter explain the height and preload adjustments for that assembly too.

How low should I set a road-going Seagull?

Agree the height after the fitter has assessed loaded clearance, working travel and spring retention. Include the battery area, speed humps and steep entrances on your usual journeys. There is no single lowering figure suitable for every wheel combination and use.

What should the fitting plan include for this EV?

Use a workshop familiar with the car. Confirm the mounts and retained parts, check wheel and underbody clearance, and include final alignment. Work involving high-voltage components needs appropriately qualified personnel.

Are there three different kits for the driving choices?

There is one listed Seagull application here. The road, mixed-use and circuit enquiries help you discuss its suitability for your loads, tyres and intended events. They are not separate priced suspension levels.

Let’s talk suspension.

Send your Seagull's build details, market specification and suspension photographs. Add the intended wheel sizes, previous changes and how you use the car.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.