Slate-blue original 2023 Seal DM-i with its horizontal-bar front grille and silver alloy wheels outside a dark industrial building

BYD Seal DM‑i FWD (2023).
The coilover guide.

Shop the coilovers

Choose a height that works on your usual roads. For the original Seal DM-i FWD, check BC's ZP-07 kit against the fitted suspension and assess clearance with your usual passengers and luggage.

Which Seal DM‑i FWD (2023) do you have?1 listed kit · 1 brandReviewed 15 November 2026

The hybrid saloon introduced in 2023.

BC lists ZP-07 in BR RS specification for the original Seal DM-i FWD from 2023. Before ordering, give the car's build details and market specification, and show the fitter any previous suspension changes. The electric Seal has a separate application.

Tell the workshop how much you want to lower the car and whether you plan to change wheels. It can check working travel, tyre clearance and the low underbody parts before agreeing a finished height. Include mounting parts and alignment in the fitting budget.

BYD launched the original Seal DM-i in China on 6 September 2023. It uses a DM-i plug-in hybrid platform, with five-link independent rear suspension. The front-wheel-drive car covered here is identified separately from the battery-electric Seal in BC's application list.

A chassis inspection of the original model shows the rear coil spring sitting in a suspension arm beside a separate damper. That arrangement matters when checking the supplied rear parts and setting the height.

BC's listing starts at 2023 without a closing year. Check later builds, renamed models and imported cars by their actual hardware. The date and Seal name alone do not establish that ZP-07 suits every subsequent version.

Start with your Seal DM‑i FWD (2023).

Confirm the chassis, year and existing suspension before choosing your setup.

Slate-blue original Seal DM-i with silver alloy wheels and its open horizontal-bar grille outside a brick garage

Original Seal DM-i FWD: check ZP-07

Send the build date, market specification and photographs of the existing suspension. BC lists ZP-07 for Seal DM-i FWD from 2023 in BR RS specification. Confirm the supplied front and rear assemblies, rubber mounting parts and anything retained from the car.

Check my Seal DM-i application

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Agree the height around the roads and loads you use.

Read the buying advice

Point out speed humps, steep driveways or car-park ramps that already need care. Have clearance checked with your usual passengers and luggage, including beneath the battery area and exhaust. Ask the fitter to explain the starting damper settings and how to record any changes.

  • Describe your usual roads and loads
  • Check underbody and tyre clearance
  • Include mounts and final alignment
Plan my Seal DM-i road setup

Discuss the tyres and intended events before choosing springs and settings.

Read the buying advice

Give the workshop both wheel and tyre specifications if you use a separate circuit set. Ask it to assess loads, suspension travel and clearance at the intended height. Check the venue requirements for the hybrid and keep an alignment and damper-setting record. A kit listing alone does not confirm suitability for your event.

  • Provide both wheel and tyre sets
  • Assess travel at the intended height
  • Check the event requirements
Discuss my Seal DM-i road and circuit use

Have the builder assess the complete car for the intended use.

Read the buying advice

Describe changed suspension, tyres and any other substantial modifications before discussing a kit. The builder needs to assess the mounts, usable travel and hybrid systems alongside the event rules. Different springs or mounting parts require a separate enquiry; this road-model application does not establish competition eligibility.

  • Describe changed hardware and tyres
  • Assess the complete hybrid installation
  • Agree the event and mounting requirements
Discuss my Seal DM-i circuit project

Separate rear springs and dampers.

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

On a standard 2023 Seal DM‑i FWD, the rear spring and damper are mounted separately.

Component layout only. Mounts, dimensions and adjusters vary by kit.

On the inspected original Seal DM-i, each rear spring sits in a suspension arm beside its damper. BYD describes the rear suspension as five-link independent. Check the fitted parts on your car, especially if it has already been lowered.

Confirm the rear springs, height adjusters, dampers and mounts supplied for ZP-07. Follow the instructions for that assembly, then have the fitter check spring retention and available travel through the suspension's movement. Check rear damper travel as well as the height at the spring seat.

Understand ride height and spring preload
Original Seal DM-i with all tyres supported on a drive-on workshop platform while a technician uses a separate computer

Agree the mounts, height and alignment before fitting.

The shop describes this BR RS application with rubber top mounts. Confirm exactly which mounting parts, bearings and fixings come with the kit, and which are reused. Have worn parts identified before booking the installation. Tell the workshop about any electronic dampers or previous suspension work on the car.

Use a workshop familiar with the hybrid. It should check wheel clearance through steering and suspension movement, along with the battery area, exhaust and other low parts at the agreed height. Include alignment and any vehicle-system checks the work requires. Work involving high-voltage components needs appropriately qualified personnel.

Mounting parts and retained hardware

Agree the exact RS package, including front bearings and rear fixings. Identify anything reused from the car and have its condition assessed. Rubber-mount wording does not specify every part in the box.

Rear spring seats and suspension joints

Have the spring seats, bushes, joints and damper mountings inspected, including any previous alterations. With the new parts fitted, check spring retention and usable travel before settling the height.

Wheel fit and loaded clearance

Provide wheel widths, offsets, tyre sizes and spacer thicknesses. Have clearance checked through steering and suspension movement with normal loads. Include the underbody and exhaust when assessing ramps and speed humps.

Alignment and recorded settings

Set the finished height before alignment. Ask which vehicle checks are needed after the work, and retain the measured alignment and damper settings so later changes have a known starting point.

The current Seal DM‑i FWD (2023) range.

See the controls and hardware in the listed kit.

BC Racing

The shop lists BCR-ZP-07 as BR RS for Seal DM-i FWD from 2023, with default spring rates of 7 kg/mm front and 6.8 kg/mm rear. BC's BR range combines compression and rebound adjustment, with a separately adjustable ride height. Confirm the supplied springs, rubber mounting package and rear height-setting instructions for your car.

View BC Racing Seal DM‑i FWD (2023) kits

Find your Seal DM‑i FWD (2023) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Seal DM‑i FWD (2023) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Seal DM‑i FWD (2023) kit links and part numbers

Before you order.

  1. Identify your car

    Give the original Seal DM-i FWD's build date, market specification and fitted damper details.

  2. Match the kit

    Check ZP-07 against the actual suspension; electric, renamed and later Seal versions need their own application confirmation.

  3. Check what’s included

    Agree the supplied front and rear parts, rubber mounts and any hardware retained from the car.

  4. Check your modifications

    Provide wheel, tyre and spacer measurements, and arrange loaded-clearance and suspension-travel checks.

  5. Plan fitting

    Include final alignment, required vehicle checks and confirmed kit availability in the fitting plan.

Questions about BYD Seal DM‑i FWD (2023) coilovers.

Check the details before choosing your kit.

Which Seal DM-i coilover kit is listed?

BC identifies ZP-07 for Seal DM-i FWD from 2023 in BR RS specification. The shop SKU is BCR-ZP-07. Check your build, market specification and fitted suspension against the supplied assembly before ordering.

Is this the same kit as the electric Seal?

BC lists the original Seal DM-i FWD separately as ZP-07 and the battery-electric Seal RWD as ZP-09. Give the exact model and build details when enquiring. A shared Seal name does not establish interchangeability.

Does the 2023-onwards date cover every later Seal DM-i?

An open-ended catalogue date does not prove coverage of every later build, renamed version or export specification. This guide concerns the original 2023-generation FWD car. Later numbered Seal models and Seal U need their own application check.

Are the rear springs separate from the dampers?

Yes, on the inspected original Seal DM-i each rear spring sits in a suspension arm beside a separate damper. BYD identifies five-link independent rear suspension. Confirm your car's existing hardware and the rear components supplied with ZP-07.

Which mounts come with the BR RS kit?

The shop describes rubber top mounts. Confirm the exact front and rear parts, bearings and fixings with the supplied kit, including anything retained from the car. The general RS description does not establish every included component or camber adjustment.

Which spring rates are listed for ZP-07?

The shop publishes 7 kg/mm front and 6.8 kg/mm rear as defaults. These are spring rates, not rates measured at the wheels. Their position in the suspension affects the force delivered at the wheel, so the two figures alone do not establish ride comfort or handling balance. Confirm the springs supplied for your use.

What does the BR damper adjuster change?

BC describes combined compression and rebound adjustment for BR. Follow the instructions for the supplied units and record the starting settings. Have the fitter explain the height and spring-preload adjustments for the exact front and rear assemblies.

How low should I set my Seal DM-i?

Agree the finished height after checking loaded ground clearance, wheel clearance, usable travel and spring retention. Include speed humps, steep entrances and car-park ramps on your usual journeys. There is no single lowering figure suitable for every wheel combination and load.

What should the fitting plan include for the hybrid?

Use a workshop familiar with the car. Confirm the mounts and retained parts, assess clearance around the battery area and exhaust, and include alignment and any vehicle checks the work requires. Work involving high-voltage components needs appropriately qualified personnel.

Are the three driving choices different kits?

There is one listed Seal DM-i application here. The road, mixed-use and circuit enquiries let you discuss tyres, loads and intended events. They are not separate priced levels, and the listing does not establish competition suitability.

Let’s talk suspension.

Send your Seal DM-i's build details and market specification, with photographs of the fitted suspension. Add your wheel sizes, previous changes and how you use the car.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.