Ice-blue original-generation BYD Seal with silver split-spoke wheels outside a dark industrial building

BYD Seal BEV (2022 generation).
The coilover guide.

Shop the coilovers

BC lists a rear-wheel-drive kit for the original Seal. TEIN separates its Chinese-market EK applications into RWD and AWD, with different spring rates and height settings.

Which Seal BEV (2022 generation) do you have?3 listed kits · 2 brandsReviewed 15 November 2026

The electric Seal introduced in 2022.

Start with the Seal you actually drive: its original sales market, drivetrain and fitted dampers. The two TEIN kits have specific Chinese-market applications, so a UK registration or a familiar trim name does not identify the right one.

For a lower road car, agree a finished height that works on your usual roads. TEIN gives recommended ranges for each application; even its two RWD grade rows differ. Have the fitter assess those settings alongside wheel clearance, suspension travel and the loads you normally carry.

BYD launched the original battery-electric Seal in China in July 2022. It uses e-Platform 3.0 and Cell-to-Body construction, which integrates the battery with the body floor. BYD presented the European Design RWD and dual-motor Excellence AWD versions in 2023.

BYD describes double-wishbone front suspension and a five-link rear. Its early European specification lists frequency-variable dampers on Excellence AWD. Market and equipment differences matter when choosing replacement suspension: an AWD Performance badge in one country is not the same application as TEIN's Chinese RWD PERFORMANCE row.

This guide covers the original Seal BEV applications listed below. Seal DM-i and the other numbered Seal models need their own checks. A manufacturer's open-ended 2022-on listing also needs confirmation against a later or revised car.

Start with your Seal BEV (2022 generation).

Match the model year, drivetrain and body style before comparing brands.

Ice-blue original Seal on silver wheels parked outside an independent brick garage

Seal RWD: check BC ZP-09

BC lists ZP-09 for Seal RWD from 2022 in BR RS specification. Match the exact car and the supplied spring, damper and rubber mounting package, including any earlier suspension changes.

Check my Seal RWD kit
Representative original Seal saloon on silver wheels outside a brick garage

Chinese EK RWD: TEIN VSASC

VSASC-C1AA3 lists ELITE and PERFORMANCE RWD grades, with 12 kgf/mm front and 10 kgf/mm rear springs. ELITE recommends 5–25 mm front and 20–40 mm rear lowering; PERFORMANCE recommends 10–30 mm front and 15–35 mm rear. Identify the original-market grade before choosing the row.

Check my Chinese-market RWD Seal
Representative ice-blue original-generation Seal with modest lowering and silver wheels

Chinese EK AWD: TEIN VSASE

VSASE-C1AA3 lists Chinese-market EK 4WD from 2022, with 14 kgf/mm front and 10 kgf/mm rear springs. Its recommended lowering range is 15–35 mm at both axles. Confirm that application against the car; it does not establish fitment for every export-market AWD version.

Check my Chinese-market AWD Seal

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Choose a height that works with your normal loads.

Read the buying advice

Describe the speed humps, steep entrances and uneven roads you use. Ask the fitter to assess the proposed height with normal passengers and luggage, including clearance below the battery area. Include retained mounting parts and final alignment in the fitting plan.

  • Allow for normal passengers and luggage
  • Assess low underbody and tyre clearance
  • Include mounting parts and alignment
Plan my Seal road setup

Discuss both uses before agreeing springs and settings.

Read the buying advice

Give the workshop the wheel and tyre details for both road and circuit use. Agree suitable working travel and alignment, then keep a record of the chosen settings. Confirm the event requirements and the exact kit specification before booking the fitting work.

  • Provide both wheel and tyre specifications
  • Agree travel and alignment for the intended use
  • Record settings and check event requirements
Discuss my Seal road and circuit use

Build the suspension plan around the car and its intended events.

Read the buying advice

Discuss tyre grip, vehicle loads, spring specification and available travel with a suspension specialist. Have the complete setup assessed together, including alignment and any existing modifications. The application listing alone does not establish that a kit suits a particular competition or circuit programme.

  • Specify the tyres, loads and intended events
  • Agree springs, travel and alignment together
  • Confirm the exact replacement assembly
Discuss my Seal circuit preparation

Separate rear springs and dampers.

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

Separate rear spring and damper, shown schematically. Exact hardware and geometry vary with the application.

Component layout only. Mounts, dimensions and adjusters vary by kit.

The Seal's multi-link rear arrangement places the coil spring inboard of a separate damper. The TEIN rear kit uses a height-adjustable spring seat beside the damper.

Have the fitter follow the chosen kit's instructions for the rear spring seat, damper length and working travel. The rear height setting needs to be assessed with spring retention and clearance through suspension movement. A full-length adjustment description is not a promise that every height will ride the same.

Understand ride height and spring preload
Original Seal supported on a drive-on wheel alignment platform while a technician uses a nearby computer

Plan fitting with a workshop familiar with the Seal.

Confirm the original market, drivetrain, build details and fitted dampers before ordering. TEIN lists reinforced rubber upper mounts at both ends for these applications. For the BC RS package, agree the exact supplied and retained mounting parts and have their condition checked.

Ask an EV-capable workshop to assess the battery area and other low parts at the proposed height. Include tyre clearance through steering and suspension movement, followed by alignment once the height is settled. Any work involving high-voltage components requires appropriately qualified personnel.

Rear spring seats and damper length

The rear spring and damper are separate. Follow the exact assembly's instructions when setting the spring seat and damper length, including spring retention and usable travel.

Rubber mounts and retained parts

TEIN lists reinforced rubber upper mounts front and rear. Confirm the BC RS contents separately, including any reused parts. Rubber mounts do not establish that camber adjustment is included.

Wheels, tyres and alignment

Provide wheel widths, offsets, tyre sizes and spacer thicknesses. Have clearance assessed with normal loads and through steering and suspension movement. Settle the final height before alignment and ask which vehicle checks the changes require.

Optional TEIN EDFC

TEIN lists EDFC compatibility for these exact rows, with separate motor and extension hardware. Its rear motors must be fitted before the dampers go into the car; the RWD instructions also require an operation check first. Confirm the complete EDFC package and fitting access before ordering it.

The current Seal BEV (2022 generation) range.

Compare the controls and hardware included in each range.

BC Racing

The shop lists BCR-ZP-09 for Seal RWD from 2022 in BR RS specification, with default spring rates of 11 kg/mm front and 12 kg/mm rear. BR uses combined compression and rebound adjustment. Have the exact spring and mounting package confirmed. Spring rates alone do not establish handling balance; suspension geometry and damper settings also matter.

View BC Racing Seal BEV (2022 generation) kits

TEIN

FLEX Z uses twin-tube dampers with 16-level compression and rebound adjustment together. VSASC-C1AA3 is the Chinese-market EK RWD application; VSASE-C1AA3 is the Chinese-market EK 4WD application. Their front spring rates and height-setting rows differ. FLEX Z has sealed damper bodies with a replacement-body service rather than conventional dismantling for overhaul.

View TEIN Seal BEV (2022 generation) kits

Find your Seal BEV (2022 generation) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

3 listings

Selected application: All Seal BEV (2022 generation) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Seal BEV (2022 generation) kit links and part numbers

Before you order.

  1. Identify your car

    Identify the original Seal BEV, its build details, sales market and drivetrain; keep DM-i and numbered Seal models separate.

  2. Match the kit

    For TEIN, match the exact Chinese-market grade and application row. A foreign Performance badge or UK registration is insufficient.

  3. Check what’s included

    Confirm the fitted dampers, supplied springs and mounting parts, including anything retained from the car.

  4. Check your modifications

    Agree a usable height with wheel, tyre and spacer details, normal loads and suspension travel in the assessment.

  5. Plan fitting

    Include final alignment, required vehicle checks and confirmed kit availability before fixing a fitting date.

Questions about BYD Seal BEV (2022 generation) coilovers.

Check the details before choosing your kit.

Does this guide cover Seal DM-i?

It covers the original battery-electric Seal applications. The BC Seal DM-i FWD listing uses ZP-07, a different application from the BEV RWD ZP-09 kit. Keep those cars and other numbered Seal models separate when asking about suspension.

Which BC Racing kit is listed for the Seal?

BC lists ZP-09 for Seal RWD from 2022 in BR RS specification. Confirm the exact car, supplied assembly and mounting parts before ordering. This RWD entry does not establish an AWD application.

Are the TEIN Seal kits for UK-market cars?

TEIN lists these kits for Chinese-market EK cars. VSASC-C1AA3 lists RWD ELITE and PERFORMANCE; VSASE-C1AA3 lists 4WD. A UK registration does not change the original sales market or establish approval for a UK-market version.

Why are there two height rows for the RWD TEIN kit?

TEIN gives separate ELITE and PERFORMANCE RWD rows for VSASC-C1AA3. Their recommended front and rear lowering ranges and reference heights differ, despite sharing the same part number and listed spring rates. Identify the original-market grade and use its row.

Is the rear spring around the damper?

The rear coil spring sits separately from the damper. The TEIN rear spring uses its own height-adjustable seat. Have the fitter follow the chosen kit instructions for that assembly and check spring retention and working travel.

Do the damper knobs adjust compression and rebound separately?

BR and FLEX Z use combined compression and rebound adjustment. Turning one adjuster changes both together. FLEX Z lists 16 adjustment levels; it is not a separate compression knob and rebound knob.

What about the factory frequency-variable dampers?

BYD's early European specification lists frequency-variable dampers on Excellence AWD. Confirm the equipment fitted to your car and agree what the chosen replacement changes. Optional TEIN EDFC is a separate control system; its listing does not establish retention of factory suspension functions.

Can EDFC be added to these TEIN kits?

TEIN lists compatibility for the exact rows, with a separate M12-12 motor kit and M12-C extension kit. The rear motors must be fitted before installing the dampers in the vehicle; the RWD rows also require an operation check first. Confirm the full package and access with the installer.

Are the kits ready for a booked fitting date?

Check the current product availability before booking. These TEIN kits are supplied to order, with no dispatch date confirmed in the listing. Confirm the kit, any retained parts and lead time together.

Let’s talk suspension.

Send your Seal's build details, original sales market and drivetrain, with photographs of the fitted suspension. Add the wheel and tyre specification, previous changes and how you use the car.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.