Dark blue 2014 Cadillac ATS saloon with gunmetal multi-spoke wheels parked beside green countryside

Cadillac ATS.
The coilover guide.

Shop the coilovers

Check whether your ATS is rear-wheel drive or all-wheel drive and identify the dampers fitted to it before choosing a kit. Have the fitter check loaded ground clearance and tyre clearance at the height you want.

Which ATS do you have?2 listed kits · 1 brandReviewed 16 November 2026

The original ATS saloon and its suspension.

BC lists ZN-04 for the ATS RWD and ZN-05 for the ATS AWD, both for 2014 to 2019. Give the supplier the build details and body style, along with details of any Magnetic Ride Control or previous suspension changes. The coupe needs its own exact application confirmation; ATS-V and long-wheelbase ATS-L are outside these applications.

Tell the fitter about your usual roads, passengers and luggage, and provide the wheel and tyre sizes you intend to use. Check clearance and suspension travel before settling on a height. Include mounting parts, any work needed for electronic dampers and final alignment in the fitting plan.

GM's 2013 ATS technical data describes rear-wheel-drive and all-wheel-drive saloons with double-pivot MacPherson front suspension and a five-link independent rear layout. Cadillac's 2014 brochure and the original-parts drawing show a rear coil spring mounted in an arm beside a separate damper.

Some ATS specifications have Magnetic Ride Control, which uses electronically controlled dampers. Identify the equipment fitted to the car itself. Replacing those dampers with manually adjusted units changes how the suspension is controlled, so the electronic system needs a fitting plan of its own.

The car's 2013 model-year history does not establish 2013 coilover fitment. BC's current main application list gives 2014 to 2019 for both ZN-04 and ZN-05. The shop's AWD listing says 2014 onwards; confirm the exact build against BC's application before ordering.

Start with your ATS.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver 2014 Cadillac ATS saloon with gunmetal wheels outside a brick garage

ATS rear-wheel drive: check ZN-04

BC lists ZN-04 for ATS RWD from 2014 to 2019. The shop has BR RA and RM MA options under BCR-ZN-04. Send the build date, body style and fitted damper details to confirm the application and the mounting parts required.

Check my ATS RWD application
Silver 2014 Cadillac ATS saloon with gunmetal wheels outside a brick garage

ATS all-wheel drive: check ZN-05

BC lists ZN-05 for ATS AWD from 2014 to 2019. The shop has BR RA and RM MA options under BCR-ZN-05. Confirm the exact year and body with the supplier, including the spring specification: the shop and BC North America publish different rear rates.

Check my ATS AWD application

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Plan the height around your journeys and normal loads.

Read the buying advice

Point out rough roads, steep entrances or speed humps that already need care. Ask the workshop to check loaded ground clearance and tyre clearance through steering and suspension movement. Discuss the springs and mounts before ordering, and have the fitter record the initial damper settings for the supplied kit.

  • Describe the roads and loads you use
  • Check clearance at the proposed height
  • Include mounting parts and alignment
Plan my ATS road setup

Give the fitter both tyre specifications and the events you have in mind.

Read the buying advice

If you use a second set of wheels for track days, provide its width, offset and tyre size as well as the road setup. Have travel and clearance assessed for both. Agree the spring specification and alignment with the workshop, then keep a record of settings so each later adjustment can be assessed separately.

  • Provide road and track wheel details
  • Agree springs for the intended use
  • Keep an alignment and setting record
Discuss my ATS road and track use

Have the builder assess the complete car and the intended events.

Read the buying advice

Describe the tyres, changed suspension hardware and any substantial modifications before selecting a kit. The builder needs to agree the mounts, spring rates and usable travel alongside the event requirements. BR and RM have different damper constructions; choosing RM alone does not establish that the completed car suits a particular circuit or competition.

  • Describe the complete car and its changes
  • Agree the required travel and mounting parts
  • Check the intended event requirements
Discuss my ATS circuit project

The rear spring sits separately from the damper.

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

On a standard Cadillac ATS saloon, the rear spring and damper are mounted separately.

Component layout only. Mounts, dimensions and adjusters vary by kit.

The original ATS rear layout has a coil spring in a suspension arm and a separate damper beside it. Cadillac's brochure drawing and the GM original-parts illustration both show this arrangement. Check for previous changes on your car before planning the installation.

Confirm the rear spring seats, height adjusters, dampers and mounting parts supplied with the exact BC kit. Follow its rear fitting instructions and check spring retention and damper travel through suspension movement. The factory layout does not establish how BC's rear height adjustment works or which parts the kit includes.

Understand ride height and spring preload
Dark blue Cadillac ATS on a workshop floor with a mechanic using a handheld torch beside the front wing

Confirm the dampers and mounts before booking the work.

Have the workshop identify the fitted dampers and inspect the mounts, bushes and joints. The shop labels BR RA as pillowball front and rubber rear, and RM MA as inverted front and rubber rear. Ask which mounts, bearings and fixings come with the selected kit and which are retained from the car. These labels do not describe every part required for fitting.

For a car with Magnetic Ride Control, agree the electronic-system work with the supplier and installer before ordering. Manual BC dampers do not retain the factory electronic damping modes. The required deactivation method and hardware still need confirmation. Set the finished height after clearance and travel checks, then arrange alignment and any vehicle checks the work requires.

Factory dampers and previous changes

Identify Magnetic Ride Control and any earlier lowering or damper replacement. Tell the installer about warning messages or altered wiring so it can assess the existing system before agreeing the work.

Mounts and rear spring hardware

Confirm supplied and retained mounts, bearings, spring seats and fixings for the exact kit. Have worn bushes and joints assessed while planning the installation, and follow the kit's instructions for the separate rear spring and damper.

Wheels and usable clearance

Provide wheel widths, offsets, tyre sizes and any spacer thicknesses. Check steering clearance, suspension movement and low underbody parts at the proposed height, including with the passengers and luggage you normally carry.

Alignment and damper settings

Agree the finished height before alignment. Use the supplied instructions for the starting damper settings, record them and make later changes in small steps. Both BR and RM use a combined compression and rebound adjuster.

The current ATS range.

Compare the controls and hardware included in each range.

BC Racing

The shop lists BR RA and RM MA for both ATS drivetrains. RM uses inverted front struts and conventional rear dampers on a car with MacPherson front suspension; BR and RM differ in construction as well as their listed mounting descriptions. Both ranges combine compression and rebound adjustment in one control. The shop gives 7 kg/mm front and 12 kg/mm rear, while BC North America's ZN-05 BR RA page gives 7 and 14 kg/mm. Confirm the springs supplied with the exact order.

View BC Racing ATS kits

Find your ATS coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All ATS applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All ATS kit links and part numbers

Before you order.

  1. Identify your car

    Give the ATS build date, body style and RWD or AWD specification; confirm the exact application against BC's 2014 to 2019 listing.

  2. Match the kit

    Identify the fitted dampers and agree any Magnetic Ride Control deactivation or integration work with the supplier and installer.

  3. Check what’s included

    Confirm BR RA or RM MA construction, the supplied spring rates and every mounting or rear height-adjustment part required.

  4. Check your modifications

    Provide wheel, tyre and spacer measurements, and arrange loaded-clearance, spring-retention and suspension-travel checks.

  5. Plan fitting

    Include retained-part condition, final alignment and confirmed kit availability in the fitting plan.

Questions about Cadillac ATS coilovers.

Check the details before choosing your kit.

Which BC kit is listed for my ATS drivetrain?

BC identifies ZN-04 for ATS rear-wheel drive and ZN-05 for ATS all-wheel drive. The shop SKUs are BCR-ZN-04 and BCR-ZN-05, with BR RA and RM MA options for each. Confirm your car's actual drivetrain, build and body before selecting an option.

Does the listing cover a 2013 ATS or every car after 2014?

BC's current main application list gives 2014 to 2019 for both drivetrains. BC North America's ZN-05 page says 2013 to 2019, and the shop's AWD title says 2014 onwards. Ask the supplier to confirm your exact build; the factory's 2013 model-year history and the open-ended shop title do not extend BC's current main application range.

Can I use this application for an ATS coupe, ATS-V or ATS-L?

A coupe needs confirmation for its exact body and build. ATS-V and long-wheelbase ATS-L are outside the applications covered here and need their own fitment check. CTS and CT4 are separate models. A shared ATS name or similar appearance does not establish kit interchangeability.

What happens if my ATS has Magnetic Ride Control?

Manual BC dampers replace the electronic damping function, so the factory Magnetic Ride Control modes will no longer control the dampers. Have the supplier and installer confirm the deactivation method and any extra hardware before ordering. An included canceller or an installation without warning messages has not been established for these kits.

How do BR RA and RM MA differ?

They have different damper constructions. For a front-MacPherson car such as the ATS, BC describes RM with inverted front struts and conventional rear dampers. The shop's BR RA and RM MA mounting labels are also different. Discuss the exact assemblies and your intended use with the supplier before choosing.

Which top mounts and fitting parts are included?

The shop labels BR RA as pillowball front and rubber rear, and RM MA as inverted front and rubber rear. Confirm which mounts, bearings and fixings are supplied and which are reused. The label alone does not establish rear height-adjuster contents, camber adjustment or every part needed to fit the kit.

Are the listed spring rates 7/12 or 7/14 kg/mm?

The shop lists 7 kg/mm front and 12 kg/mm rear for both applications. BC North America's exact ZN-05 BR RA page lists 7 kg/mm front and 14 kg/mm rear. Confirm the specification that will be supplied with your order. Spring position and suspension leverage affect the rate at the wheel, so comparing the front and rear spring numbers alone does not predict handling balance.

Are the ATS rear springs separate from the dampers?

Yes. The original saloon's rear coil spring sits in a suspension arm beside a separate damper. Check the car for previous alterations and confirm the BC rear assembly and instructions. Have spring retention and damper travel checked at the agreed height and through suspension movement.

How low should I set my ATS?

Agree the height after checking loaded ground clearance, tyre clearance and usable suspension travel. Include the ramps, speed humps and uneven roads you use. Your wheels, tyres and normal loads affect the result, so there is no single lowering figure suitable for every ATS.

What do the BR and RM damper adjusters change?

Both ranges use one adjuster that changes compression and rebound together. Follow the instructions for the supplied units and ask the fitter to record the starting settings. Make small changes and assess each change separately.

Let’s talk suspension.

Send your ATS build details, body style and drivetrain, plus photographs of the fitted dampers. Add wheel and tyre sizes, previous suspension changes and how you use the car so the supplier can check the application and order specification.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.