
Cadillac CTS 2003–2007.
The coilover guide.
Shop the coiloversIdentify any rear load levelling on your CTS and check which mounts the installation will retain. Agree the supplied spring rates before ordering: the shop and BC North America list different front springs for ZN-03.
Rear load levelling depends on the car's equipment.
BC lists ZN-03 for the rear-wheel-drive CTS (Sigma I) from 2003 to 2007. The shop's BCR-ZN-03 is a BR RN kit, labelled with no front top mount supplied and rubber rear mounts. Give the supplier your car's build details, engine and market specification so it can confirm the exact application and parts required. CTS-V needs a separate enquiry; later Sigma II, AWD and ATS applications are outside this listing.
Explain what you want to change about the ride and where you drive. A car that regularly carries passengers and luggage needs those loads included in the height and clearance checks. Have the fitter assess the existing suspension before settling on springs or a lower ride height, particularly if the car has rear load levelling or has already been modified.
Cadillac's US 2007 CTS specification sheet lists 2.8-litre and 3.6-litre V6 saloons. Its optional 3.6L V6 18-Inch Wheel Performance Package includes rear load levelling. That gives you a reason to identify the rear suspension fitted to your own car before replacing it; it does not establish the equipment on every CTS from 2003 to 2007.
The GM rear suspension drawing for a 2005 CTS Base 3.6 shows a coil spring with separate seats beside the rear shock absorber. Ask the workshop to inspect the spring seats as well as the damper mounts on your car, including any previous replacements.
Start with your CTS 2003–2007.
Confirm the chassis, year and existing suspension before choosing your setup.

CTS Sigma I RWD: check ZN-03
The manufacturer lists ZN-03 for CTS (Sigma I) RWD, 2003 to 2007, and the shop lists BR RN under BCR-ZN-03. Send your build and equipment details for confirmation, including any rear load levelling. Ask the supplier to settle the front spring-rate difference and specify which mounts and rear spring parts your order requires.
Check my CTS applicationWhat do you want
from the car?
Choose advice for everyday driving, occasional circuit days or a dedicated track project.
Describe the ride you want and the roads the car has to cope with.
Read the buying advice
If broken surfaces already make the car uncomfortable, tell the supplier before agreeing the springs. Show the fitter any steep entrance or speed hump that limits clearance, and explain how often the car carries a full load. Choose the height after checking the car with its usual passengers and luggage. Include replacement mounts or other worn parts in the fitting budget.
- Discuss ride comfort and normal loads
- Check clearance on your usual journeys
Include the track tyres and the journey home in the setup discussion.
Read the buying advice
Provide the width, offset and tyre size of both wheel sets if you change wheels for track days. The workshop needs to check clearance and suspension travel with each set, then agree springs and alignment for the use you describe. Keep a record of the starting damper settings so you can assess later changes without losing the road setup.
- Provide both wheel and tyre specifications
- Keep a record of alignment and damper settings
Have the builder assess the car against the intended events.
Read the buying advice
Give the builder details of the tyres, suspension alterations and any changes to the car's weight. It needs to agree the spring and damper specification with the supplier and assess usable travel at the proposed height. Confirm mounting and rear spring hardware before booking the installation. A ZN-03 application listing alone does not establish suitability for a particular event or competition.
- Describe the complete car and intended events
- Agree the suspension specification with the builder
Check the rear spring and damper separately.
On a standard Cadillac CTS Sigma I saloon rear layout, the rear spring and damper are mounted separately.
Component layout only. Mounts, dimensions and adjusters vary by kit.In GM's selected 2005 CTS Base 3.6 drawing, spring 5 and its seats 6 sit separately from shock absorber 4; the lower arm is item 9. The drawing identifies the factory components. Confirm the arrangement on your car and ask for the exact BC rear installation instructions before work starts.
The order needs to specify the rear springs, seats or height adjusters, dampers and mounting parts. Have the fitter check spring retention and damper travel through suspension movement at the agreed height. If the car has load levelling, agree how the replacement suspension will support its normal loads before removing the original parts.
Understand ride height and spring preload
Inspect the retained parts before ordering.
The shop labels this BR RN kit with no front top mount supplied and rubber rear mounts. BC North America's general RN table allows rubber or reused original mounts. Ask the supplier to itemise what comes with this exact order, then have the workshop inspect every mount and fixing it plans to retain. Include any replacements in the quotation so worn original parts do not hold up the installation.
Have the workshop identify any rear load-levelling equipment and agree the replacement parts with the supplier. Cadillac's 2007 US sheet confirms that equipment on a selected package, but does not describe a universal removal procedure. The installer must confirm the work for your car. Set the finished height after checking clearance and travel, then arrange alignment.
Rear load levelling and previous changes
Tell the fitter about replacement rear dampers, altered springs or earlier lowering. Identify the equipment now on the car and agree the parts required for its normal loads. The original package description cannot confirm what remains fitted today.
Mounts and rear spring hardware
Obtain an itemised list of supplied and retained parts, including the front mounts and rear spring seats or adjusters. Have the workshop assess the condition of retained mounts, bushes and joints before booking the work. Camber plates are not confirmed for this order.
Wheels and ground clearance
Give the fitter your wheel widths, offsets, tyre sizes and any spacer thicknesses. Check for contact through steering and suspension movement, and assess low underbody parts with the car carrying its normal load. Agree a usable height for the entrances and roads you drive.
Alignment and damper adjustment
Arrange alignment once the finished height is agreed. BR's single adjuster changes compression and rebound together, so it changes both directions of damper movement. Follow the supplied instructions for initial settings and record each later change.
The current CTS 2003–2007 range.
See the controls and hardware in the listed kit.
The shop lists BCR-ZN-03 as BR RN for the 2003 to 2007 CTS Sigma I. Its spring specification is 10 kg/mm front and 12 kg/mm rear; BC North America's exact ZN-03-BR-RN page lists 12 kg/mm at both ends. Ask the supplier to confirm the rates on the order it will fulfil. BC describes BR with 30 clicks of combined compression and rebound adjustment. That control cannot adjust compression and rebound separately.
View BC Racing CTS 2003–2007 kitsFind your CTS 2003–2007 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All CTS 2003–2007 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

BC Racing · BCR-ZN-03
BC Racing Coilovers - Cadillac Cts (Sigma I) (03-07)
Check the exact application
All CTS 2003–2007 kit links and part numbers
Before you order.
Identify your car
Send the build date, engine and market specification, and confirm that the car is a rear-wheel-drive CTS Sigma I. CTS-V requires a separate enquiry.
Match the kit
Ask the supplier to confirm ZN-03 for your exact car, including any rear load levelling and the replacement parts it requires. Agree the supplied spring rates: the shop lists 10 kg/mm front and 12 kg/mm rear, while BC North America lists 12 kg/mm front and rear.
Check what’s included
Confirm which front and rear mounts the order includes and which original parts the fitter must retain. Ask for an itemised list of the separate rear spring hardware, including any seats or height adjusters, and the exact fitting instructions.
Check your modifications
Provide wheel widths, offsets, tyre sizes and any spacer thicknesses. Have the fitter check for contact through steering and suspension movement, and assess ground clearance with the car carrying its normal passengers and luggage.
Plan fitting
Have the fitter assess the condition of the existing suspension and any parts it will retain. Agree the finished height after checking usable suspension travel and clearance, then arrange alignment. Confirm the supply time before booking the installation.
Questions about Cadillac CTS 2003–2007 coilovers.
Check the details before choosing your kit.
Which BC application is listed for the 2003 to 2007 CTS?
BC lists ZN-03 for CTS (Sigma I) RWD from 2003 to 2007. The shop SKU is BCR-ZN-03, listed as BR RN. Ask the supplier to confirm your exact build, engine and equipment before ordering; the family listing does not settle every car's installation requirements.
Does ZN-03 cover CTS-V, later CTS models or AWD?
CTS-V needs its own exact application confirmation and is outside this enquiry's standard CTS scope. BC lists later Sigma II RWD and CTS AWD separately. ATS is also a separate model. Use the application for the car you own; these names do not establish that the kits interchange.
How does rear load levelling affect the fitting plan?
Cadillac's US 2007 sheet includes rear load levelling in the selected 3.6L V6 18-Inch Wheel Performance Package. Have the workshop identify your fitted equipment and agree the replacement springs, dampers and associated parts with the supplier. That sheet does not identify the equipment or removal method for every 2003 to 2007 CTS.
Will the kit arrive with 10/12 or 12/12 kg/mm springs?
The shop lists 10 kg/mm front and 12 kg/mm rear. BC North America's ZN-03-BR-RN page lists 12 kg/mm front and rear. Confirm the fulfilled specification with the supplier before ordering. Neither listing resolves the difference, and the spring numbers alone do not establish how your car will ride.
Do I need to reuse my front top mounts?
The shop's BR RN label says no front top mount is supplied and describes rubber rear mounts. Ask which original mounts and fixings the fitter must retain and which parts the order includes. Have retained parts inspected first. The generic RN rubber-or-reuse description does not confirm a complete hardware inventory for this CTS kit.
Are the factory rear springs separate from the dampers?
The GM drawing for a 2005 CTS Base 3.6 shows spring 5 and seats 6 separately from shock absorber 4. Check your car for earlier modifications. Confirm the BC rear spring hardware and fitting instructions, including how the installer will check spring retention and damper travel at the chosen height.
How much should I lower my CTS?
Agree the height with the fitter after checking tyre clearance, ground clearance and usable suspension travel. Include normal passengers and luggage, along with steep entrances or speed humps you use. An exact usable lowering amount has not been confirmed for this car and kit combination.
Does the BR adjuster only change rebound?
BC describes BR as having 30 clicks of simultaneous compression and rebound adjustment. One control changes both, with no separate compression setting. Use the instructions for the supplied dampers and ask the fitter to record the starting settings.
When should I book the alignment?
Plan alignment with the workshop as part of the installation, after it has agreed the finished height and completed the clearance and travel checks. Tell it about changed arms, bushes or wheel specifications so it can assess the completed car.
Can the same kit be chosen for commuting and track days?
Describe both uses to the supplier and fitter before agreeing the spring and damper specification. Include rough roads and normal loads, plus any different track wheels and tyres. The BR application listing does not guarantee a particular comfort level or suitability for your intended events.
Let’s talk suspension.
Send your CTS build and equipment details with photographs of the fitted rear suspension. Add your wheel and tyre sizes and describe the ride you want, so the supplier can confirm the application, springs and mounting parts before you order.



