Orange Chevrolet Aveo T300 hatchback on dark wheels by a harbour road

Chevrolet Aveo / Sonic T300.
The coilover guide.

Shop the coilovers

The T300 was sold in the UK as the Aveo and in North America as the Sonic. BC lists it under the Sonic name, so confirm the body and engine before ordering.

Which Aveo / Sonic T300 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Aveo T300 history

The second Aveo, the T300, arrived in the UK in 2011 as a hatchback and saloon with exposed round headlamps. BC lists BCR-Q-08 for it under its North American name, the Sonic.

It is a different car from the earlier Aveo T250, which has its own guide. Give the supplier the VIN, body and engine.

Chevrolet launched the T300 in 2011, built on GM's Gamma II platform. In the UK it replaced the T250 Aveo and was sold until Chevrolet left Europe at the end of 2015.

It uses struts at the front and a torsion-beam rear axle, typical of small hatchbacks.

Small wheels and short travel mean a big drop can use up the suspension quickly. Keep the height sensible for speed humps and potholes.

Start with your Aveo / Sonic T300.

Confirm the chassis, year and existing suspension before choosing your setup.

White Chevrolet Aveo T300 hatchback on silver wheels on a city street

Aveo hatchback

BC lists BCR-Q-08 for the 2012-on Sonic T300, with default rates of 6 kg/mm front and 3 kg/mm rear. Ask BC to confirm a UK Aveo from the VIN.

Check my Aveo
Grey Chevrolet Sonic saloon outside a modern workshop

Saloon

Ask BC to confirm the saloon before ordering, and give the supplier the engine.

Check my Aveo saloon
Orange Chevrolet Aveo T300 by a harbour road

2011 cars

BC's listing starts in 2012. For a 2011 car, ask BC to confirm the reference.

Check my 2011 Aveo

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-08, subject to an application check

BC lists BCR-Q-08 for the Aveo. Have the application checked before ordering.

Read the buying advice

BCR-Q-08 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Aveo

A small car on small wheels needs its travel. Keep the drop modest.

Read the buying advice

Agree a height that clears speed humps and kerbs, and check clearance with your wheels through full steering lock. Set the alignment last.

  • Keep clearance for humps
  • Check wheel clearance
  • Set alignment last
Discuss my Aveo

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Aveo, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Aveo has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 6 kg/mm front and 3 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.

Read about ride height and spring preload
Blue Chevrolet Aveo T300 hatchback standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the generation

Check from the VIN that the car is a T300 and not the earlier T250 Aveo.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Aveo / Sonic T300 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-Q-08 is listed for the 2012-on Sonic under T300. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 3 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Aveo / Sonic T300 kits

Find your Aveo / Sonic T300 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Aveo / Sonic T300 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Aveo / Sonic T300 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, body, engine and build date.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Aveo / Sonic T300 coilovers.

Check the details before choosing your kit.

Is the Sonic the same as the Aveo?

Yes, for the T300: it was sold as the Aveo in the UK and the Sonic in North America. Ask BC to confirm a UK car from the VIN.

Does it fit the older Aveo T250?

No. The T250 has its own BC reference and guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Aveo. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Aveo's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.