Yellow Chevrolet Camaro SS with black stripes, lightly lowered on dark wheels in a Peak District lay-by

Chevrolet Camaro fifth generation.
The coilover guide.

Shop the coilovers

BC Racing splits the fifth-generation Camaro into 2009-2013 and 2013-2015 references. Check the build year first, then pick a version for how you drive.

Which Camaro fifth generation do you have?2 listed kits · 1 brandReviewed 21 November 2026

Camaro fifth generation history

The fifth-generation Camaro brought the name back in 2010 as a retro-styled coupe and convertible with V6 and V8 SS engines. BC lists BCR-Q-04 for 2009-2013 cars and BCR-Q-10 for 2013-2015 cars.

Both come as BR RN, ER with external reservoirs, or ZX, with default rates of 7 kg/mm front and 10 kg/mm rear. Give the supplier the build date, engine and body before ordering.

Chevrolet revived the Camaro for the 2010 model year on GM's Zeta rear-drive platform, with MacPherson struts at the front and a multi-link rear. The range included V6, V8 SS, ZL1 and Z/28 versions, and a convertible.

A facelift for 2014 changed the front and rear styling. BC's split between its 2009-2013 and 2013-2015 references means the build date matters when ordering.

Many Camaros in the UK are imports. Check the car's exact model year and specification from its VIN rather than its registration date.

Start with your Camaro fifth generation.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Chevrolet Camaro coupe on silver wheels on a country lane

2009-2013 cars

BC lists BCR-Q-04 for 2009-2013 Camaros. Give the supplier the VIN, engine and body, and ask it to confirm the reference and supplied mounts.

Check my 2009-2013 Camaro
Black Chevrolet Camaro SS on black wheels outside a modern workshop

2013-2015 cars

BC lists BCR-Q-10 for 2013-2015 Camaros. If the car is near the changeover, the VIN decides which reference applies.

Check my 2013-2015 Camaro
Yellow Chevrolet Camaro SS with black stripes in a moorland lay-by

ZL1, Z/28 and convertibles

The ZL1 and Z/28 have their own factory suspension. Ask BC to confirm the reference for those cars and for the convertible before ordering.

Check my ZL1 or convertible

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-04 BR RN, subject to an application check

BC lists BR RN versions for both build ranges. Have the application checked before ordering.

Read the buying advice

The BR RN version is a possible starting point for a road Camaro once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for bumpy roads.

  • Confirm the build date
  • Leave room for movement
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Q-10 ER, subject to an application check

BC's ER version adds two-way adjustment with external reservoirs. Plan reservoir mounting first.

Read the buying advice

The ER version adds separate compression adjustment. Agree where the reservoirs will mount and how you will reach the adjusters, and confirm rates for your tyres.

  • Plan reservoir mounting
  • Give tyre details
  • Agree rates and settings
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Q-10 ZX, subject to an application check

BC's ZX version is its most advanced listed option. Confirm the specification with BC.

Read the buying advice

Tell the supplier about your circuits, tyres and how much the car is used on the road. Agree rates, settings and delivery before ordering.

  • Confirm the ZX specification
  • Agree rates
  • Confirm delivery
View current configurations

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Camaro, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The fifth-generation Camaro has a multi-link rear with the spring mounted separately from the damper. BC lists 7 kg/mm front and 10 kg/mm rear; because the springs sit in different positions, the figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Check the alignment at the final ride height.

Read about ride height and spring preload
Red Chevrolet Camaro standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model year

Check the car's model year and specification from the VIN, especially on imported cars. BC's references split at 2013.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Camaro fifth generation range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Q-04 is listed for 2009-2013 Camaros and BCR-Q-10 for 2013-2015 cars. Both come as BR RN, ER with external reservoirs, or ZX, with default rates of 7 kg/mm front and 10 kg/mm rear. Ask BC about the ZL1, Z/28 and convertible.

View BC Racing Camaro fifth generation kits

Find your Camaro fifth generation coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Camaro fifth generation applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Camaro fifth generation kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model year, engine and body, including whether the car is a ZL1, Z/28 or convertible.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Camaro fifth generation coilovers.

Check the details before choosing your kit.

Which BC reference fits my Camaro?

BC lists BCR-Q-04 for 2009-2013 and BCR-Q-10 for 2013-2015. Use the VIN to confirm the model year.

Do these kits fit the sixth-generation Camaro?

No. The 2016-on Camaro has its own references and guide.

What is the difference between BR, ER and ZX?

BR has 30-way rebound adjustment. ER adds two-way adjustment with external reservoirs. ZX is BC's most advanced listed option.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Camaro. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Camaro's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.