
Chevrolet Cavalier 1995-2005.
The coilover guide.
Shop the coiloversBC Racing lists the third-generation Cavalier in BR and RM versions. On a car this age, check the condition first, then set a modest height.
Chevrolet Cavalier history
The third-generation Cavalier was Chevrolet's compact coupe and saloon from 1995 to 2005, including the sporty Z24. BC lists BCR-Q-02 for it, as BR RA with a pillowball front or RM MA with an inverted front.
It is an American car and rare in the UK, so most here are imports. It is not the Vauxhall Cavalier, which is a different car.
Chevrolet launched the third-generation Cavalier for 1995 on GM's J platform, shared with the Pontiac Sunfire. It came as a coupe, saloon and convertible, with the Z24 as the sporting model.
It used struts at the front and a twist-beam rear axle, a simple layout that suits a modest lowering.
After many years, the bushes, mounts and subframe are likely to be worn. Have them inspected before fitting new suspension.
Start with your Cavalier 1995-2005.
Confirm the chassis, year and existing suspension before choosing your setup.

Coupe and Z24
BC lists BCR-Q-02 for the 1995-2005 Cavalier, with default rates of 6 kg/mm front and 4 kg/mm rear. Give the supplier the VIN, body and engine.
Check my Cavalier
Saloon and convertible
Ask BC to confirm the saloon and convertible, which may differ in weight from the coupe.
Check my Cavalier saloon
Imported cars
Check the model year and specification from the VIN, and inspect the car's condition before ordering.
Check my imported CavalierChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-Q-02 BR RA for the Cavalier. Have the application checked before ordering.
Read the buying advice
BCR-Q-02 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.
- Confirm the engine and build date
- Leave room for suspension movement
- Include alignment
BC's RM MA version has an inverted front damper. Confirm it suits your car and use.
Read the buying advice
Tell the supplier how you drive and what tyres you use, and agree spring rates and starting settings for that use. Confirm the supplied mounts for this version.
- Confirm the version
- Give tyre details
- Agree rates and settings
Have the bushes, mounts and subframe checked before fitting new suspension.
Read the buying advice
Ask the workshop to inspect the top mounts, control-arm bushes, subframe and rear beam bushes. Replace worn parts so the new suspension can do its job.
- Inspect bushes and mounts
- Repair worn parts
- Then set the height
Know how the rear beam works
On a standard Chevrolet Cavalier, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Cavalier has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 6 kg/mm front and 4 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.
A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Inspect bushes and mounts
Have the workshop inspect the top mounts, bushes and subframe for wear, and replace worn parts before fitting.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Cavalier 1995-2005 range.
See the controls and hardware in the listed kit.
BCR-Q-02 is listed for the 1995-2005 Cavalier, as BR RA or RM MA. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 4 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.
View BC Racing Cavalier 1995-2005 kitsFind your Cavalier 1995-2005 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Cavalier 1995-2005 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - Chevrolet Cavalier (95-05) [JF37]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-Q-02
BC Racing Coilovers - Chevrolet Cavalier (95-05) [JF37]
Check the exact application
All Cavalier 1995-2005 kit links and part numbers
Before you order.
Identify your car
Send the VIN, model year, engine and body.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Chevrolet Cavalier 1995-2005 coilovers.
Check the details before choosing your kit.
Is this the Vauxhall Cavalier?
No. The Chevrolet Cavalier is an American car on GM's J platform. The Vauxhall Cavalier is a different car.
What is the difference between BR and RM?
BR RA has a pillowball front mount. RM MA uses an inverted front damper. Both are listed with the same default rates.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Cavalier. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Cavalier's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



