
Chevrolet Cobalt 2005-2010.
The coilover guide.
Shop the coiloversBC Racing lists the Cobalt in BR and RM versions. Confirm the model and engine, especially on an SS, then set a height that keeps travel.
Chevrolet Cobalt history
The Cobalt replaced the Cavalier in 2005 as Chevrolet's compact coupe and saloon, with the supercharged and later turbocharged SS at the top. BC lists BCR-Q-01 for 2006-2010 cars.
It comes as BR RA with a pillowball front or RM MA with an inverted front, with default rates of 6 kg/mm front and rear. Most UK cars are imports, so check the specification from the VIN.
Chevrolet launched the Cobalt for 2005 on GM's Delta platform, shared with the Saturn Ion. The SS arrived with a supercharged 2.0-litre engine and was later replaced by a turbocharged version.
It uses struts at the front and a twist-beam rear axle. The SS has firmer factory suspension and different wheels, so give the supplier the exact model.
It was replaced by the Cruze in 2010.
Start with your Cobalt 2005-2010.
Confirm the chassis, year and existing suspension before choosing your setup.

Coupe and SS
BC lists BCR-Q-01 for the 2006-2010 Cobalt. Give the supplier the VIN and whether the car is an SS, and ask it to confirm the kit.
Check my Cobalt SS
Saloon
Ask BC to confirm the saloon, and give the supplier the engine and wheel sizes.
Check my Cobalt saloon
2005 cars
BC lists 2006-2010. For a 2005 car, ask BC to confirm the reference before ordering.
Check my 2005 CobaltChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-Q-01 BR RA for the Cobalt. Have the application checked before ordering.
Read the buying advice
BCR-Q-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.
- Confirm the engine and build date
- Leave room for suspension movement
- Include alignment
BC's RM MA version has an inverted front damper. Confirm it suits your car and use.
Read the buying advice
Tell the supplier how you drive and what tyres you use, and agree spring rates and starting settings for that use. Confirm the supplied mounts for this version.
- Confirm the version
- Give tyre details
- Agree rates and settings
Tell the supplier about your tyres and circuits so the rates and settings suit them.
Read the buying advice
Start in the middle of the damping range and agree rates with the supplier for your tyres. Keep enough travel for kerbs, and check the alignment after setting the height.
- Give tyre details
- Start mid-range
- Check alignment
Know how the rear beam works
On a standard Chevrolet Cobalt, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Cobalt has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 6 kg/mm front and 6 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.
A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model
Check from the VIN whether the car is an SS and which engine it has, especially on an imported car.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Cobalt 2005-2010 range.
See the controls and hardware in the listed kit.
BCR-Q-01 is listed for the 2006-2010 Cobalt, as BR RA or RM MA. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 6 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.
View BC Racing Cobalt 2005-2010 kitsFind your Cobalt 2005-2010 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Cobalt 2005-2010 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

BC Racing · BCR-Q-01
BC Racing Coilovers - Chevrolet Cobalt (06-10)
Check the exact application
All Cobalt 2005-2010 kit links and part numbers
Before you order.
Identify your car
Send the VIN, model year, engine and body, including whether the car is an SS.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Chevrolet Cobalt 2005-2010 coilovers.
Check the details before choosing your kit.
Does BCR-Q-01 fit the Cobalt SS?
BC lists the 2006-2010 Cobalt. Ask BC to confirm the SS, which has firmer factory suspension.
What is the difference between BR and RM?
BR RA has a pillowball front mount. RM MA uses an inverted front damper.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Cobalt. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Cobalt's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



