
Chevrolet Corvette C4.
The coilover guide.
Shop the coiloversThe C4 Corvette uses transverse leaf springs, not coil springs. A coilover kit replaces them, so understand the conversion and the car's condition first, then choose a kit.
Corvette C4 history
The C4 ran from 1984 to 1996 as a coupe and convertible, including the ZR-1 and Grand Sport. Like the later C5 and C6, it carries the car on transverse composite leaf springs at the front and rear.
BC lists BCR-Q-19 for the rear-drive C4 from 1989 to 1996, and Nitron lists R1 and R3 kits for the C4. Ask the supplier exactly what each kit replaces and supplies before ordering.
Chevrolet launched the C4 for 1984 with a new chassis, aluminium suspension parts and a transverse composite leaf spring at each end. A convertible returned in 1986, the ZR-1 arrived in 1990 and the run ended with the 1996 Grand Sport.
Some C4s were fitted with Selective Ride Control, an adjustable damping system. Tell the supplier if the car has it, and how it will be removed or bypassed.
Most C4s are now classic cars. Have the frame rails, suspension mounts and bushes inspected before fitting new suspension, and keep the original parts if the car may be returned to standard.
Start with your Corvette C4.
Match the model year, drivetrain and body style before comparing brands.

1989-1996 C4
BC lists BCR-Q-19 for the rear-drive Corvette from 1989 to 1996, with default rates of 10 kg/mm front and 8 kg/mm rear. Give the supplier the model year and any previous suspension changes, and ask for the conversion parts list.
Check my C4
1984-1988 and Selective Ride cars
BC's listing starts at 1989. For an earlier car, or one with Selective Ride Control, ask BC and Nitron to confirm the application before ordering.
Check my early C4
Track and events
Nitron lists R1 and R3 kits for the C4. R3 has separate rebound, low-speed and high-speed compression controls. Tell the supplier about the tyres and events, and confirm the conversion parts.
Check my track C4Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-Q-19 for the 1989-1996 C4. Confirm what it replaces before ordering.
Read the buying advice
BCR-Q-19 is a possible starting point once the supplier has confirmed fitment and the conversion parts. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest on an older car, and include alignment.
- Confirm the model year
- Confirm the conversion parts
- Include alignment
Have the frame, mounts and bushes checked first. Fix problems before fitting new suspension.
Read the buying advice
Ask a Corvette specialist to inspect the frame rails, suspension mounts, bushes and ball joints. Plan the conversion around the car's condition, and keep the original leaf springs and parts.
- Inspect the frame and mounts
- Keep original parts
- Record the work
Nitron lists R3 for the C4. Confirm the conversion parts and settings with Nitron.
Read the buying advice
R3 lets you set rebound and both compression speeds separately. Agree spring rates, valving and starting settings with Nitron for your tyres and events, and confirm delivery timing before booking fitting.
- Confirm the C4 application
- Agree rates and valving
- Confirm delivery timing
Understand the leaf-spring conversion
On a standard Chevrolet Corvette C4, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The factory C4 carries the car on a transverse composite leaf spring at each end, separate from the dampers. A coilover kit puts a coil spring around each damper instead, so the damper mounts now carry the spring load.
Ask the supplier whether the leaf springs are removed entirely, what mounting parts are supplied, and whether the mounts need any work on an older car. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with classic Corvettes and with removing the transverse leaf springs safely. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Inspect the frame and mounts
Have the frame rails, suspension mounts, bushes and ball joints inspected for wear and corrosion. Repair them before fitting new suspension.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Corvette C4 range.
Compare the controls and hardware included in each range.
BCR-Q-19 is listed for the rear-drive Corvette C4 from 1989 to 1996, with 30-way rebound adjustment and default rates of 10 kg/mm front and 8 kg/mm rear. Ask BC for the conversion parts list and about earlier cars.
View BC Racing Corvette C4 kitsNitron lists R1 and R3 kits for the C4. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. Confirm the conversion parts and fitting requirements with Nitron. Both are supplied to order.
View Nitron Corvette C4 kitsFind your Corvette C4 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
3 listings
Selected application: All Corvette C4 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Nitron · NTCCH013R3_
Nitron Chevrolet Corvette C4 R3 Coilover Suspension Kit
Check the exact application
![BC Racing Coilovers - Chevrolet Corvette RWD (89-96) [C4]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-Q-19
BC Racing Coilovers - Chevrolet Corvette RWD (89-96) [C4]
Check the exact application

Nitron · NTCCH013R1_
Nitron Chevrolet Corvette C4 R1 Coilover Suspension Kit
Check the exact application
Before you order.
Identify your car
Send the model year, VIN, body and details of any previous suspension work, including Selective Ride Control.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including the leaf-spring conversion and any repairs. Confirm delivery timing before reserving workshop time.
Questions about Chevrolet Corvette C4 coilovers.
Check the details before choosing your kit.
Does a C4 Corvette have coil springs?
No. It uses a transverse composite leaf spring at each end. A coilover kit converts it to coil springs on the dampers.
Does BCR-Q-19 fit a 1984-1988 C4?
BC lists it from 1989 to 1996. Ask BC to confirm an earlier car before ordering.
Can I keep the original parts?
Yes. Keep the leaf springs and mounting parts if you might return the car to standard.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Corvette C4. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Corvette C4's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.




