
Chevrolet Corvette C5 and C6.
The coilover guide.
Shop the coiloversThe C5 and C6 Corvette use transverse composite leaf springs, not coil springs. A coilover kit replaces them, so understand the conversion first, then choose a kit for how you drive.
Corvette C5 and C6 history
From 1997 to 2013 the Corvette used double wishbones at each corner with a single composite leaf spring running across the car at the front and another at the rear. The C5 and C6 share that layout, which is why BC, MOTON and Nitron each list one family of kits for both.
Fitting coilovers converts the car to coil springs on the dampers and removes or bypasses the leaf springs. Ask the supplier exactly what the kit replaces and supplies before ordering.
Chevrolet launched the C5 in 1997 with an aluminium LS1 V8, a hydroformed steel frame and a rear-mounted transaxle. The C6 followed in 2005 with the same basic layout, and ran until 2013 in coupe, convertible, Z06, Grand Sport and ZR1 form.
Both generations use transverse composite leaf springs front and rear. Magnetic Selective Ride Control, with magnetorheological dampers, was offered from 2003 on the C5 and later on the C6. Tell the supplier if the car has it.
The Z06 and ZR1 have different wheels, tyres and in some cases brakes. Give the supplier the exact model before ordering, and check clearance at the intended height.
Start with your Corvette C5 and C6.
Match the model year, drivetrain and body style before comparing brands.

Coupe and convertible
BC lists I-15 (BCR-Q-15) for the 1997-2013 Corvette, offered as BR RH with pillowball mounts, ER with external reservoirs, or ZX. BCR-Q-25 is a version with pillowball bottom-mount bushes. Default rates are 10 kg/mm front and 12 kg/mm rear. Confirm the model and build date with the supplier.
Check my Corvette
Magnetic Ride Control cars
A coilover kit with manual damping replaces the magnetic dampers. Nitron's elec-TRON kits use electronic damping instead and need Nitron's DCU controller, sold separately. Ask the supplier what each route means for the car's warning lights and modes.
Check my MRC Corvette
Track and Z06
MOTON lists M 503 017S two-way and M 503 014S three-way kits for the C5, C6 and C6 Z06, and Nitron lists R1 and R3. Tell the supplier about the tyres, circuits and how often the car runs.
Check my track CorvetteChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-Q-15 BR RH with pillowball mounts for the C5 and C6. Confirm what it replaces before ordering.
Read the buying advice
The BR RH version is a possible starting point for a road car once the supplier has confirmed fitment and the conversion parts. It has 30-way rebound adjustment and height set separately from spring preload. Agree a modest height that keeps travel and front clearance.
- Confirm the leaf-spring conversion
- Keep front clearance
- Include alignment
BC's ER version of BCR-Q-15 has two-way adjustment and external reservoirs. Confirm reservoir mounting first.
Read the buying advice
The ER version adds separate compression adjustment on external reservoirs. Agree where the reservoirs will mount and how you will reach the adjusters, and confirm the spring rates for your tyres.
- Plan reservoir mounting
- Give tyre details
- Agree rates and settings
MOTON lists a two-way kit, M 503 017S, for the C5, C6 and C6 Z06. Confirm the conversion parts and settings.
Read the buying advice
The MOTON two-way kit has separate rebound and compression adjustment on remote reservoirs. Ask the supplier for the full parts list for the leaf-spring conversion, agree spring rates and starting settings, and confirm delivery timing before booking fitting.
- Confirm the conversion parts
- Agree rates and settings
- Confirm delivery timing
Understand the leaf-spring conversion
On a standard Chevrolet Corvette, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The factory C5 and C6 carry the car on a transverse composite leaf spring at each end, separate from the dampers. A coilover kit puts a coil spring around each damper instead, so the damper mounts now carry the spring load.
Ask the supplier whether the leaf springs are removed entirely, what mounting parts and spring seats are supplied, and whether any other parts need changing. Agree the rates for the converted car, and check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with Corvettes and with removing the transverse leaf springs safely. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Plan the leaf-spring conversion
Agree with the supplier and workshop how the leaf springs will be removed, what replaces them, and whether you want to keep them in case the car is returned to standard.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Corvette C5 and C6 range.
Compare the controls and hardware included in each range.
BCR-Q-15 is listed for the 1997-2013 Corvette C5/C6 as BR RH with pillowball mounts, ER with external reservoirs, or ZX. BCR-Q-25 adds pillowball bottom-mount bushes. Both list default rates of 10 kg/mm front and 12 kg/mm rear. Ask BC for the conversion parts list.
View BC Racing Corvette C5 and C6 kitsMOTON lists M 503 017S two-way and M 503 014S three-way motorsport kits for the C5, C6 and C6 Z06. Both have remote reservoirs. Confirm the leaf-spring conversion parts, rates and reservoir positions with the supplier.
View MOTON Corvette C5 and C6 kitsNitron lists R1 and R3 kits for the C5/C6, plus elec-TRON versions with electronic damping that need Nitron's DCU controller, sold separately. Confirm the conversion parts, control interface and supplied hardware with Nitron. All are supplied to order.
View Nitron Corvette C5 and C6 kitsFind your Corvette C5 and C6 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
8 listings
Selected application: All Corvette C5 and C6 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Nitron · NTCCH010ER1_
Nitron Chevrolet Corvette C5/C6 elec-TRON R1 Coilover Suspension Kit
Check the exact application
![BC Racing Coilovers - Chevrolet Corvette (97-13) [C5/C6]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-Q-15
BC Racing Coilovers - Chevrolet Corvette (97-13) [C5/C6]
Check the exact application

MOTON · M 503 014S
MOTON 3-Way Motorsport Coilovers for Chevrolet C5 / C6 - M 503 014S
Check the exact application

Nitron · NTCCH010ER3_
Nitron Chevrolet Corvette C5/C6 elec-TRON R3 Coilover Suspension Kit
Check the exact application
![BC Racing Coilovers - Chevrolet Corvette (Pillowball Bottom Mount Bush) (97-13) [C5/C6]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-Q-25
BC Racing Coilovers - Chevrolet Corvette (Pillowball Bottom Mount Bush) (97-13) [C5/C6]
Check the exact application

MOTON · M 503 017S
MOTON 2-Way Motorsport Coilovers for Chevrolet C5 / C6 - M 503 017S
Check the exact application
All Corvette C5 and C6 kit links and part numbers
- BC Racing · BCR-Q-15: BC Racing Coilovers - Chevrolet Corvette (97-13) [C5/C6]
- BC Racing · BCR-Q-25: BC Racing Coilovers - Chevrolet Corvette (Pillowball Bottom Mount Bush) (97-13) [C5/C6]
- MOTON · M 503 014S: MOTON 3-Way Motorsport Coilovers for Chevrolet C5 / C6 - M 503 014S
- MOTON · M 503 017S: MOTON 2-Way Motorsport Coilovers for Chevrolet C5 / C6 - M 503 017S
- Nitron · NTCCH010R3_: Nitron Chevrolet Corvette C5/C6 R3 Coilover Suspension Kit
- Nitron · NTCCH010R1_: Nitron Chevrolet Corvette C5/C6 R1 Coilover Suspension Kit
- Nitron · NTCCH010ER3_: Nitron Chevrolet Corvette C5/C6 elec-TRON R3 Coilover Suspension Kit
- Nitron · NTCCH010ER1_: Nitron Chevrolet Corvette C5/C6 elec-TRON R1 Coilover Suspension Kit
Before you order.
Identify your car
Send the model, build date, VIN and options list, including Magnetic Ride Control and whether the car is a Z06, Grand Sport or ZR1.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including the leaf-spring conversion and any electronic work. Confirm delivery timing before reserving workshop time.
Questions about Chevrolet Corvette C5 and C6 coilovers.
Check the details before choosing your kit.
Does a Corvette C5 or C6 have coil springs?
No. The factory car uses a transverse composite leaf spring at the front and another at the rear. A coilover kit converts it to coil springs on the dampers.
Can I keep Magnetic Ride Control?
Not with a manually adjusted kit. Nitron's elec-TRON kits use electronic damping with Nitron's own DCU controller. Ask the supplier what each route involves.
Do C5 and C6 kits differ?
BC, MOTON and Nitron list the same references for both generations. Give the supplier the exact model and build date so it can confirm the parts.
Can I put the leaf springs back later?
Keep the original springs and mounting parts if you might return the car to standard, and ask the workshop to record what it removed.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Corvette. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Corvette's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.





