Blue Chevrolet Corvette C7 Stingray, lightly lowered on dark wheels in a Scottish Highland lay-by

Chevrolet Corvette C7.
The coilover guide.

Shop the coilovers

The C7 still uses transverse leaf springs, and many cars have Magnetic Ride Control. Understand the conversion and the damper plan first, then choose a kit.

Which Corvette C7 do you have?5 listed kits · 2 brandsReviewed 21 November 2026

Corvette C7 history

The C7 Corvette ran from 2014 to 2019 as the Stingray, Grand Sport, Z06 and ZR1, in coupe and convertible form. It keeps a transverse composite leaf spring at the front and rear.

BC lists BCR-Q-12 for the Stingray, and Nitron lists R1, R3 and elec-TRON kits for the C7. Ask the supplier what each kit replaces and how it treats Magnetic Ride Control.

Chevrolet launched the C7 Stingray for 2014 with an aluminium frame and the LT1 V8, followed by the supercharged Z06, the Grand Sport and the ZR1. It was the last front-engined Corvette before the mid-engined C8.

Magnetic Ride Control was available on many C7s. A manually adjusted kit replaces it; Nitron's elec-TRON kits use electronic damping instead.

The Z06, Grand Sport and ZR1 have wider bodies and different wheels. Give the supplier the exact model so it can confirm the kit and clearance.

Start with your Corvette C7.

Match the model year, drivetrain and body style before comparing brands.

White Chevrolet Corvette C7 Stingray on silver wheels on a country lane

Stingray

BC lists BCR-Q-12 for the 2014-2019 Corvette Stingray, with default rates of 8 kg/mm front and 9 kg/mm rear. Give the supplier the model, build date and options, and ask for the conversion parts list.

Check my C7 Stingray
Grey Chevrolet Corvette C7 Grand Sport outside a modern workshop

Magnetic Ride Control cars

A kit with manual damping replaces the magnetic dampers. Ask the supplier what that means for the warning lights and driving modes, or ask Nitron about its elec-TRON kits, which use electronic damping.

Check my MRC C7
Yellow Chevrolet Corvette C7 Z06 in front of closed circuit pit garages

Z06, Grand Sport and track use

Nitron lists R1 and R3 kits for the C7; R3 has separate rebound, low-speed and high-speed compression controls. Confirm the Z06 or Grand Sport application, and tell the supplier about the tyres and circuits.

Check my track C7

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-12, subject to an application check

BC lists BCR-Q-12 for the C7 Stingray. Confirm what it replaces and how it treats MRC before ordering.

Read the buying advice

BCR-Q-12 is a possible starting point for a road Stingray once the supplier has confirmed fitment and the conversion parts. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough front clearance for ramps.

  • Confirm the conversion parts
  • Agree the MRC plan
  • Include alignment
View current configurations

Nitron lists elec-TRON kits for the C7. Confirm the control interface and parts with Nitron.

Read the buying advice

elec-TRON uses electronically controlled damping instead of fixed manual settings. Ask Nitron which controller and parts are needed for your car, and how it works with the factory systems.

  • Confirm the control interface
  • Ask about extra parts
  • Confirm delivery timing
Discuss elec-TRON for my C7

Nitron lists R3 for the C7. Agree rates, valving and the conversion parts.

Read the buying advice

R3 lets you set rebound and both compression speeds separately. Agree spring rates, valving and starting settings with Nitron for your tyres and circuits, and confirm delivery timing before booking fitting.

  • Confirm the C7 model
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron R3 for my C7

Understand the leaf-spring conversion

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Corvette C7, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The factory C7 carries the car on a transverse composite leaf spring at each end, separate from the dampers. A coilover kit puts a coil spring around each damper instead, so the damper mounts now carry the spring load.

Ask the supplier whether the leaf springs are removed entirely and what mounting parts are supplied. Agree the rates for the converted car, and check the alignment at the final ride height.

Read about ride height and spring preload
Red Chevrolet Corvette C7 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with Corvettes, Magnetic Ride Control and removing the leaf springs safely. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Plan the leaf-spring conversion

Agree with the supplier and workshop how the leaf springs will be removed, what replaces them and whether you want to keep them.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Corvette C7 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Q-12 is listed for the 2014-2019 Corvette Stingray under C7, with 30-way rebound adjustment and default rates of 8 kg/mm front and 9 kg/mm rear. Ask BC about the conversion parts, MRC and the Z06.

View BC Racing Corvette C7 kits

Nitron

Nitron lists R1 and R3 kits for the C7, plus elec-TRON versions with electronic damping. R3 has separate rebound, low-speed and high-speed compression controls. Confirm the conversion parts and control interface with Nitron. All are supplied to order.

View Nitron Corvette C7 kits

Find your Corvette C7 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

5 listings

Selected application: All Corvette C7 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Corvette C7 kit links and part numbers

Before you order.

  1. Identify your car

    Send the model, build date, VIN and options list, including Magnetic Ride Control and whether the car is a Z06, Grand Sport or ZR1.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including the leaf-spring conversion and any electronic work. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Corvette C7 coilovers.

Check the details before choosing your kit.

Does the C7 have coil springs?

No. Like the C5 and C6, it uses a transverse composite leaf spring at each end. A coilover kit converts it to coil springs on the dampers.

Does BCR-Q-12 fit the Z06?

BC lists it for the Stingray. Ask BC to confirm a Z06, Grand Sport or ZR1.

What happens to Magnetic Ride Control?

A manually adjusted kit replaces it. Ask the supplier about the warning lights, or ask Nitron about elec-TRON.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Corvette C7. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Corvette C7's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.