Orange Chevrolet Corvette C8 Stingray, lightly lowered on dark wheels in a Scottish Highland lay-by

Chevrolet Corvette C8.
The coilover guide.

Shop the coilovers

Nitron lists ten C8 kits, split by damping type and whether they keep front-axle lift. Decide whether you need lift and electronic damping first, then choose the kit.

Which Corvette C8 do you have?10 listed kits · 1 brandReviewed 21 November 2026

Corvette C8 history

The C8 moved the Corvette's engine behind the driver in 2020, and dropped the transverse leaf springs of earlier generations for coil springs. Nitron lists R1, R3, elec-TRON R1 and elec-TRON R3 kits for it.

Several versions include FAL, a front-axle lift, and some elec-TRON kits are listed with OEI. Ask Nitron exactly what each option does on your car before ordering, because the factory front lift is how many owners clear driveways and ramps.

Chevrolet launched the mid-engined C8 Stingray for 2020, followed by a convertible, the Z06 and the hybrid E-Ray. It uses an aluminium structure and coil springs at each corner.

Magnetic Ride Control and a front-axle lift system are available on many cars. The lift raises the nose for kerbs and ramps; Nitron's FAL versions are designed for cars where that matters, adding 25 mm or 40 mm of lift at the damper depending on the application.

Because the C8 is wide and low with a long front overhang, ground clearance is the first thing to plan when lowering it.

Start with your Corvette C8.

Confirm the chassis, year and existing suspension before choosing your setup.

White Chevrolet Corvette C8 on silver wheels on a country lane

Stingray without lift

Nitron lists R1 and R3 kits for the C8 without front-axle lift. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. Confirm the model and options with Nitron.

Check my C8
Red Chevrolet Corvette C8 convertible outside a modern workshop

Front-axle lift (FAL)

Nitron lists R1, R3 and elec-TRON kits with FAL for cars that need front lift. Ask Nitron how its FAL works with your car's lift system and how much lift it adds.

Check my C8 with lift
Grey Chevrolet Corvette C8 Z06 in front of closed circuit pit garages

Electronic damping and track

elec-TRON kits use electronically controlled damping, and some are listed with OEI. Ask Nitron what OEI means for your car, how the kit connects, and whether it suits track use with your tyres.

Check my track C8

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron's R1 has one combined damping adjuster. Confirm the application and lift needs first.

Read the buying advice

R1 keeps adjustment simple for a road car. Tell Nitron about your roads, tyres and whether you need front-axle lift, and agree spring rates and starting settings. All C8 kits are supplied to order, so confirm delivery timing.

  • Confirm lift or no lift
  • Agree rates and settings
  • Confirm delivery timing
Discuss a Nitron R1 for my C8

Nitron's FAL versions add front lift for kerbs and ramps. Confirm how they work with your car.

Read the buying advice

If you use the factory lift every day, ask Nitron for a FAL version and how much lift it gives. Plan the ride height with the lift in mind, and check clearance on your own driveway and ramps.

  • Confirm the lift amount
  • Check your driveway
  • Agree the ride height
Discuss FAL for my C8

R3 separates rebound and both compression speeds; elec-TRON adds electronic control.

Read the buying advice

Tell Nitron about your circuits and tyres, and decide whether you want fully manual R3 or electronic elec-TRON R3. Agree rates, valving and the control interface before ordering.

  • Choose R3 or elec-TRON
  • Agree rates and valving
  • Confirm the control interface
Discuss a track kit for my C8

Plan around the coil springs and lift

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Corvette C8, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Unlike earlier Corvettes, the C8 uses coil springs at each corner, so a coilover kit replaces like with like rather than converting a leaf-spring car.

The front-axle lift is the bigger question. Decide whether you need it before choosing a kit, and check the alignment at the final ride height.

Read about ride height and spring preload
Orange Chevrolet Corvette C8 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with the C8, its lift system and Magnetic Ride Control. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Decide on front-axle lift

Check whether the car has the factory front lift and how often you use it. That decides whether you need a FAL kit.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Corvette C8 range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists ten C8 kits: R1 and R3 with and without FAL, elec-TRON R1 and R3 with and without FAL, and elec-TRON R1 and R3 with OEI. FAL adds 25 mm or 40 mm of lift at the damper depending on application. Confirm the options, control interface and fitting with Nitron. All are supplied to order.

View Nitron Corvette C8 kits

Find your Corvette C8 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

10 listings

Selected application: All Corvette C8 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 10 shown
All Corvette C8 kit links and part numbers

Before you order.

  1. Identify your car

    Send the model, build date, VIN and options list, including Magnetic Ride Control, front-axle lift and whether the car is a Z06 or E-Ray.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including any lift or electronic work. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Corvette C8 coilovers.

Check the details before choosing your kit.

Does the C8 use leaf springs like earlier Corvettes?

No. The C8 uses coil springs at each corner.

What is FAL?

Front-axle lift. Nitron's FAL versions add 25 mm or 40 mm of lift at the damper, depending on application, for cars that need to clear kerbs and ramps.

Why are there no prices shown for C8 kits?

The Nitron kits are supplied to order and need their options confirmed, so this guide treats them as enquiries. Ask for a quote once the specification is agreed.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Corvette C8. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Corvette C8's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.