Red second-generation Chevrolet Cruze saloon, lightly lowered on dark wheels in a Lake District lay-by

Chevrolet Cruze second generation.
The coilover guide.

Shop the coilovers

BC Racing lists one kit for the second-generation Cruze. Confirm the body and engine, then set the height around clearance and the car's beam rear axle.

Which Cruze second generation do you have?1 listed kit · 1 brandReviewed 21 November 2026

Cruze second generation history

The second-generation Cruze arrived in 2016 as a saloon and, later, a hatchback, sold mainly in North America and Asia. BC lists BCR-Q-16 for it, with default rates of 5 kg/mm front and 4.5 kg/mm rear.

It was not sold new in the UK, so most cars here are imports. Confirm the exact model and engine from the VIN before ordering.

Chevrolet launched the second-generation Cruze for 2016 on GM's D2 platform, lighter than the J300 it replaced. A hatchback followed, along with a diesel in some markets.

Production in the US ended in 2019, though the car continued elsewhere. The first-generation J300 that was sold in the UK has its own guide.

Like most cars of its size, it has struts at the front and a torsion-beam rear. Keep enough travel for passengers and luggage.

Start with your Cruze second generation.

Confirm the chassis, year and existing suspension before choosing your setup.

White second-generation Chevrolet Cruze saloon on silver wheels on a suburban street

Saloon

BC lists BCR-Q-16 for the 2015-2019 Cruze. Give the supplier the VIN, engine and body, and ask it to confirm the kit for your car.

Check my Cruze saloon
Grey second-generation Chevrolet Cruze hatchback on black wheels outside a modern workshop

Hatchback and diesel

Ask BC to confirm the hatchback and diesel versions, which may differ in weight and rear suspension from the petrol saloon.

Check my Cruze hatchback
Red second-generation Chevrolet Cruze saloon in a lay-by

Imported cars

Most UK cars are imports. Check the model year and specification from the VIN, and keep any import paperwork with the order.

Check my imported Cruze

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-16, subject to an application check

BC lists BCR-Q-16 for the Cruze. Have the application checked before ordering.

Read the buying advice

BCR-Q-16 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Cruze

Tell the supplier how the car is loaded so the rates and height suit it.

Read the buying advice

A family car often carries passengers and luggage. Give the supplier that detail and agree a height that keeps enough travel when the car is full.

  • Describe usual loads
  • Agree the height
  • Check alignment
Discuss my loaded Cruze

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Cruze, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Cruze has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 5 kg/mm front and 4.5 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.

Read about ride height and spring preload
Blue second-generation Chevrolet Cruze standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model and engine

Check from the VIN the exact model year, body and engine, especially on an imported car.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and the passengers and luggage the car carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Cruze second generation range.

See the controls and hardware in the listed kit.

BC Racing

BCR-Q-16 is listed for the 2015-2019 Cruze under D2XX. It has 30-way rebound adjustment and default rates of 5 kg/mm front and 4.5 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Cruze second generation kits

Find your Cruze second generation coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Cruze second generation applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Cruze second generation kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model year, engine and body, and how the car is usually loaded.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Cruze second generation coilovers.

Check the details before choosing your kit.

Does BCR-Q-16 fit the first-generation Cruze?

No. The J300 sold in the UK from 2009 has its own BC reference, BCR-Q-06, and its own guide.

Does it fit the hatchback?

Ask BC to confirm the hatchback and diesel versions before ordering.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Cruze. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Cruze's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.