Blue Chevrolet Cruze J300 saloon, lightly lowered on dark wheels in a Lake District lay-by

Chevrolet Cruze J300/J305.
The coilover guide.

Shop the coilovers

BC Racing and Eibach both list the first-generation Cruze. Check the engine and body, then set the height around clearance and the car's rear beam axle.

Which Cruze J300/J305 do you have?2 listed kits · 2 brandsReviewed 21 November 2026

Cruze J300 history

The J300 Cruze was Chevrolet's family car in Europe from 2009, as a saloon, the J305 hatchback and an estate. BC lists BCR-Q-06 for 2009-2015 cars, and Eibach lists its Pro-Street S for the saloon and hatchback.

The Cruze uses MacPherson struts at the front and a torsion-beam rear axle, so the rear spring sits separately from the damper. Give the supplier the engine and body before ordering.

Chevrolet launched the Cruze in 2009 on GM's Delta II platform, shared with the Vauxhall Astra J. It replaced the Lacetti in Europe and was offered with petrol and diesel engines, followed by a hatchback in 2011.

Chevrolet withdrew from most of Europe at the end of 2015, but many Cruzes remain on UK roads. Parts support is still good thanks to the shared GM platform.

As a family car, it often carries passengers and luggage. Keep enough suspension travel for that when choosing a height.

Start with your Cruze J300/J305.

Match the model year, drivetrain and body style before comparing brands.

Silver Chevrolet Cruze J300 saloon on silver wheels on a suburban street

Saloon

BC lists BCR-Q-06 for the 2009-2015 Cruze, with default rates of 6 kg/mm front and 3.5 kg/mm rear. Eibach lists the J300 from May 2009 with 1.4, 1.6, 1.8 and diesel engines. Confirm the engine and body with the supplier.

Check my Cruze saloon
White Chevrolet Cruze J305 hatchback on black wheels outside a modern workshop

Hatchback J305

Eibach lists the J305 hatchback alongside the saloon. Ask BC to confirm the hatchback and estate for its kit.

Check my Cruze hatchback
Blue Chevrolet Cruze saloon in a lay-by

Estate and loaded cars

Tell the supplier if the car is an estate or regularly carries heavy loads. Check Eibach's axle-load limits, 1,220 kg front and 1,000 kg rear, against the car's documents.

Check my Cruze estate

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-06, subject to an application check

BC lists BCR-Q-06 for the 2009-2015 Cruze. Have the application checked before ordering.

Read the buying advice

BCR-Q-06 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for passengers and luggage.

  • Confirm the engine
  • Leave travel for loads
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · Eibach Pro-Street S, subject to an exact-car check

Eibach lists PSS65-65-020-01-22 for the J300 and J305 with axle-load limits. Check them first.

Read the buying advice

Eibach gives 40-70 mm front and 45-75 mm rear adjustment, with the front set on the threaded strut and the rear on a separate adjustable unit. Some cars may need spacers or extra original parts. It excludes cars with levelling control.

  • Check the axle-load limits
  • Confirm no levelling control
  • Ask which parts are needed
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Cruze

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Cruze, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Cruze has a torsion-beam rear axle with the spring mounted separately from the damper. Both listed kits keep that layout: Eibach describes a separate rear height-adjustable unit.

BC lists 6 kg/mm front and 3.5 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison. A beam axle has little adjustment, so check the rear alignment readings at the final height.

Read about ride height and spring preload
Red Chevrolet Cruze saloon standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check the engine and body

Confirm the engine and whether the car is a saloon, hatchback or estate. Eibach lists specific engines and bodies.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and the passengers and luggage the car carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Cruze J300/J305 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Q-06 is listed for the 2009-2015 Cruze under J300, with 30-way rebound adjustment and default rates of 6 kg/mm front and 3.5 kg/mm rear. Ask BC to confirm the hatchback and estate.

View BC Racing Cruze J300/J305 kits

Eibach

PSS65-65-020-01-22 is listed for the Cruze J300 and J305 hatchback from May 2009, with 1.4, 1.6, 1.8 and diesel engines. It has axle-load limits of 1,220 kg front and 1,000 kg rear, 40-70 mm front and 45-75 mm rear adjustment, and excludes levelling control.

View Eibach Cruze J300/J305 kits

Find your Cruze J300/J305 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Cruze J300/J305 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Cruze J300/J305 kit links and part numbers

Before you order.

  1. Identify your car

    Send the engine, body, build date and VIN, and how the car is usually loaded.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Cruze J300/J305 coilovers.

Check the details before choosing your kit.

Do the kits fit the Cruze hatchback?

Eibach lists the J305 hatchback. Ask BC to confirm it for BCR-Q-06.

Do Vauxhall Astra J parts fit?

The Cruze shares GM's Delta II platform with the Astra J, but order against the Cruze application rather than assuming parts interchange.

Does it fit the second-generation Cruze?

No. The 2016-on Cruze has its own BC reference, BCR-Q-16.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Cruze. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Cruze's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.