Silver Chevrolet Lacetti hatchback on alloy wheels in a Lake District lay-by

Chevrolet Lacetti / Optra J200.
The coilover guide.

Shop the coilovers

The J200 was sold as the Lacetti in the UK and the Optra elsewhere. BC lists it under the Optra name, so confirm the body and engine before ordering.

Which Lacetti / Optra J200 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Lacetti J200 history

The J200 was developed by Daewoo and sold in the UK as the Daewoo and then Chevrolet Lacetti, and in other markets as the Optra. BC lists BCR-Q-07 for the 2002-2008 car under the Optra name.

Give the supplier the VIN, body and engine so it can confirm the kit for a UK Lacetti.

Daewoo launched the J200 in 2002 as the Lacetti, and it became a Chevrolet after GM took over Daewoo. In the UK it was sold as a hatchback, saloon and estate.

It was also badged as the Chevrolet Optra and Suzuki Forenza in other markets. The Cruze replaced it in 2009.

Most surviving cars are now old enough that worn bushes and mounts matter. Have them inspected before fitting new suspension.

Start with your Lacetti / Optra J200.

Confirm the chassis, year and existing suspension before choosing your setup.

Red Chevrolet Lacetti hatchback on silver wheels on a suburban street

Lacetti hatchback

BC lists BCR-Q-07 for the 2002-2008 Optra J200, with default rates of 6 kg/mm front and 4 kg/mm rear. Ask BC to confirm the UK Lacetti hatchback from the VIN.

Check my Lacetti
Blue Chevrolet Optra saloon outside a brick workshop

Saloon and estate

Ask BC to confirm the saloon and estate before ordering, as body and weight can affect the kit.

Check my Lacetti saloon
Silver Chevrolet Lacetti hatchback in a lay-by

Daewoo-badged cars

Early UK cars wore Daewoo badges. Give the supplier the VIN so it can confirm the same J200 application.

Check my Daewoo Lacetti

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-07, subject to an application check

BC lists BCR-Q-07 for the Lacetti. Have the application checked before ordering.

Read the buying advice

BCR-Q-07 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Lacetti

Have the bushes and mounts checked before fitting new suspension.

Read the buying advice

Ask the workshop to inspect the top mounts, bushes and subframe. Replace worn parts so the new suspension can do its job, then set the height.

  • Inspect bushes and mounts
  • Repair worn parts
  • Then set the height
Discuss my older Lacetti

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Lacetti, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Lacetti uses struts with the spring around the damper, so a coilover kit replaces like with like. BC lists default rates of 6 kg/mm front and 4 kg/mm rear.

Ask BC what the kit supplies at the top mounts and spring seats, and check the alignment at the final ride height.

Read about ride height and spring preload
Black Chevrolet Lacetti hatchback standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body and badge

Check from the VIN the body and engine, and whether the car was first registered as a Daewoo or Chevrolet.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Lacetti / Optra J200 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-Q-07 is listed for the 2002-2008 Optra under J200. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 4 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Lacetti / Optra J200 kits

Find your Lacetti / Optra J200 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Lacetti / Optra J200 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Lacetti / Optra J200 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, body, engine and build date.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Lacetti / Optra J200 coilovers.

Check the details before choosing your kit.

Is the Optra the same as the Lacetti?

Both names were used for the J200 in different markets. BC lists it as the Optra; ask BC to confirm a UK Lacetti from the VIN.

Does it fit the Cruze?

No. The Cruze that replaced the Lacetti has its own references.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Lacetti. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Lacetti's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.