Lime green Chevrolet Spark M300, lightly lowered on dark wheels by a harbour road

Chevrolet Spark M300.
The coilover guide.

Shop the coilovers

BC Racing lists one Spark M300 kit for Korean-market cars and another for US-market cars. Confirm which applies to yours, then keep the drop modest for city roads.

Which Spark M300 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Spark M300 history

The M300 Spark was Chevrolet's small five-door city car from 2010. BC lists BCR-Q-13 for the Korean-market car from 2010 to 2015 and BCR-Q-11 for the US-market car from 2009 to 2015, both with default rates of 5 kg/mm front and 3 kg/mm rear.

UK Sparks were built in Korea, so the Korean reference is the likely starting point, but ask BC to confirm it from the VIN.

Chevrolet launched the M300 Spark in 2009 to replace the Matiz, with 1.0 and 1.2 petrol engines in Europe. It was built in South Korea and sold widely, including a US version later on.

Like most city cars, it uses MacPherson struts at the front and a torsion-beam rear. The car is light, so modest spring rates suit it.

With small wheels and short suspension travel, a big drop can quickly use up the travel available. Keep the height sensible for speed humps and potholes.

Start with your Spark M300.

Confirm the chassis, year and existing suspension before choosing your setup.

White Chevrolet Spark M300 on silver wheels on a city street

Korean-market Spark

BC lists BCR-Q-13 for the Korean-market Spark from 2010 to 2015. Give the supplier the VIN and engine, and ask it to confirm the reference for a UK car.

Check my Spark
Red Chevrolet Spark M300 on black wheels outside a modern workshop

US-market Spark

BC lists BCR-Q-11 for the US-market Spark from 2009 to 2015. Ask BC whether any difference applies to your car before ordering.

Check my US-market Spark
Lime green Chevrolet Spark M300 by a harbour road

Wheels and clearance

Give the supplier the wheel and tyre sizes. On a small car, check clearance at the intended height through steering lock and suspension travel.

Check my Spark wheels

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-13, subject to an application check

BC lists BCR-Q-13 for the Korean-market Spark. Have the application confirmed from the VIN.

Read the buying advice

BCR-Q-13 is a possible starting point for a UK car once BC has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough clearance for speed humps.

  • Confirm the market version
  • Keep clearance for humps
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Q-11, subject to an application check

BC lists BCR-Q-11 for US-market Sparks. Confirm with BC which reference your car needs.

Read the buying advice

If the car is a US-market import, ask BC whether BCR-Q-11 is the right kit. Give the supplier the VIN and engine.

  • Confirm the market
  • Give the VIN
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Spark

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Spark, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Spark has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists 5 kg/mm front and 3 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison.

A beam axle has little adjustment, so check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Silver Chevrolet Spark M300 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the market version

Check from the VIN whether the car is a Korean- or US-market Spark. BC lists separate references.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Spark M300 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Q-13 is listed for the Korean-market Spark M300 from 2010 to 2015, and BCR-Q-11 for the US-market car from 2009 to 2015. Both have 30-way rebound adjustment and default rates of 5 kg/mm front and 3 kg/mm rear.

View BC Racing Spark M300 kits

Find your Spark M300 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Spark M300 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Spark M300 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and build date, and where the car was first sold.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Spark M300 coilovers.

Check the details before choosing your kit.

Which BC kit fits a UK Spark?

UK Sparks were built in Korea, so BCR-Q-13 is the likely starting point. Ask BC to confirm it from the VIN.

Does it fit the later Spark M400?

No. The 2016-on Spark has its own BC reference, BCR-Q-18.

Does it fit the Matiz?

No. The Matiz that came before has a different reference.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Spark. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Spark's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.