Red Chevrolet SS saloon, lightly lowered on dark wheels in a Yorkshire Dales lay-by

Chevrolet SS 2014-2017.
The coilover guide.

Shop the coilovers

The SS is a rear-drive V8 saloon on GM's Zeta platform. Check whether it has Magnetic Ride Control, then set the height around clearance and travel.

Which SS 2014-2017 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Chevrolet SS history

The Chevrolet SS was the North American version of the Holden Commodore VF, built in Australia from 2014 to 2017 with a 6.2-litre V8. BC lists BCR-Q-14 for it, with default rates of 7 kg/mm front and 12 kg/mm rear.

Later cars have Magnetic Ride Control. Tell the supplier if yours does before ordering.

Chevrolet sold the SS in North America from 2014 as a version of Holden's VF Commodore, built in Australia on GM's Zeta rear-drive platform. It used the LS3 V8.

For 2016 it gained Magnetic Ride Control and other updates. Production ended in 2017 when Holden stopped building cars in Australia.

Because it shares its platform with the Commodore, give the supplier the exact car rather than assuming a Commodore kit fits.

Start with your SS 2014-2017.

Confirm the chassis, year and existing suspension before choosing your setup.

Black Chevrolet SS saloon on silver wheels on a country lane

SS saloon

BC lists BCR-Q-14 for the 2014-2017 SS. Give the supplier the VIN and options list, and ask it to confirm the kit.

Check my SS
White Chevrolet SS saloon with quad exhausts in front of circuit pit garages

Magnetic Ride Control cars

A manually adjusted kit replaces the magnetic dampers on later cars. Ask the supplier how it handles the wiring and warning lights.

Check my MRC SS
Red Chevrolet SS saloon in a lay-by

Holden Commodore VF

The SS shares its platform with the VF Commodore. Order against the SS application, and ask BC about a Commodore separately.

Check my Commodore

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-14, subject to an application check

BC lists BCR-Q-14 for the SS. Have the application checked before ordering.

Read the buying advice

BCR-Q-14 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my SS

Later cars have magnetic dampers. Agree how the kit replaces them before ordering.

Read the buying advice

Ask BC and the fitter how the kit handles the factory damper wiring and what the car will show afterwards. Settle that before booking fitting.

  • Confirm MRC
  • Ask about warning lights
  • Book fitting once
Discuss the dampers on my SS

Check where the rear spring carries the load

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet SS, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The SS's rear spring sits separately from the damper. BC lists default rates of 7 kg/mm front and 12 kg/mm rear; because the springs sit in different positions, the figures are not a direct comparison of stiffness at the wheel.

Ask BC which rear arrangement the kit uses and what it supplies at the rear spring seat. Check the alignment at the final ride height.

Read about ride height and spring preload
Blue Chevrolet SS saloon standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with Magnetic Ride Control, agree in advance how the factory damper wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check for Magnetic Ride Control

Confirm from the VIN data whether the car has Magnetic Ride Control. That affects the fitting work.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current SS 2014-2017 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-Q-14 is listed for the 2014-2017 SS under ZETA. It has 30-way rebound adjustment and default rates of 7 kg/mm front and 12 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing SS 2014-2017 kits

Find your SS 2014-2017 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All SS 2014-2017 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All SS 2014-2017 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model year and options list, including Magnetic Ride Control.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet SS 2014-2017 coilovers.

Check the details before choosing your kit.

Does a Holden Commodore kit fit the SS?

They share the Zeta platform, but order against the SS application and ask BC to confirm.

What happens to Magnetic Ride Control?

A kit with manual damping replaces it. Ask the supplier about the wiring and warning lights.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every SS. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the SS's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.