Blue second-generation Chevrolet Volt on dark wheels by a coastal road

Chevrolet Volt second generation.
The coilover guide.

Shop the coilovers

The second-generation Volt is a plug-in hybrid with a heavy battery under the floor. Confirm the car, then keep the drop modest and use an EV-aware workshop.

Which Volt second generation do you have?1 listed kit · 1 brandReviewed 21 November 2026

Chevrolet Volt second generation history

The second-generation Volt arrived in 2016 as a plug-in hybrid with a petrol range extender. It was not sold new in the UK, so cars here are imports. BC lists BCR-Q-20 for it.

It comes as BR RA with a pillowball front or RM MA with an inverted front, with default rates of 6 kg/mm front and rear.

Chevrolet launched the second-generation Volt for 2016 with a larger battery and more electric range than the first. A petrol engine acts mainly as a generator when the battery runs low.

The first-generation Volt was sold in the UK as the Vauxhall Ampera, but the second generation was not. Production ended in 2019.

The battery runs along the floor, so the car is heavier than a petrol hatchback of the same size. Use a workshop that knows how to lift and work on it safely.

Start with your Volt second generation.

Confirm the chassis, year and existing suspension before choosing your setup.

White second-generation Chevrolet Volt on silver wheels on a suburban street

Volt 2016-2019

BC lists BCR-Q-20 for the 2016-2019 Volt. Give the supplier the VIN and model year, and ask it to confirm the kit.

Check my Volt
Grey second-generation Chevrolet Volt at a charging point

Battery weight

The battery adds weight. Ask the supplier whether the standard rates suit your car and how it is loaded.

Check my Volt's rates
Blue Chevrolet Volt by a coastal road

First-generation and Ampera

These references are for the second generation. The first-generation Volt and Vauxhall Ampera need their own confirmation.

Check my first-generation Volt

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Q-20 BR RA, subject to an application check

BC lists BCR-Q-20 BR RA for the Volt. Have the application checked before ordering.

Read the buying advice

BCR-Q-20 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Q-20 RM MA, subject to an application check

BC's RM MA version has an inverted front damper. Confirm it suits your car and use.

Read the buying advice

Tell the supplier how you drive and what tyres you use, and agree spring rates and starting settings for that use. Confirm the supplied mounts for this version.

  • Confirm the version
  • Give tyre details
  • Agree rates and settings
View current configurations

The battery runs under the floor. Use a workshop that knows the correct lifting points.

Read the buying advice

Ask the workshop whether it is familiar with plug-in hybrids and the Volt's lifting points. Book fitting and alignment together once the parts are confirmed.

  • Check EV experience
  • Confirm lifting points
  • Book fitting and alignment
Discuss fitting my Volt

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chevrolet Volt, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Volt has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 6 kg/mm front and 6 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.

Read about ride height and spring preload
Red second-generation Chevrolet Volt standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Use a workshop familiar with plug-in hybrids and the correct lifting points. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the generation

Check from the VIN that the car is a 2016-2019 second-generation Volt.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Volt second generation range.

See the controls and hardware in the listed kit.

BC Racing

BCR-Q-20 is listed for the 2016-2019 Volt, as BR RA or RM MA. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 6 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Volt second generation kits

Find your Volt second generation coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Volt second generation applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Volt second generation kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN and model year, and how the car is usually loaded.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chevrolet Volt second generation coilovers.

Check the details before choosing your kit.

Does it fit the Vauxhall Ampera?

No. The Ampera is the first-generation car. These references are for the 2016-2019 Volt.

Does the battery affect the kit?

It adds weight under the floor. Ask the supplier whether the standard rates suit your car.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Volt. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Volt's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.