Purple first-generation Chrysler Neon saloon on alloy wheels in a Cotswolds lay-by

Chrysler Neon 1994-1999.
The coilover guide.

Shop the coilovers

The first Neon was sold in the UK as a Chrysler saloon from 1996. On a car this age, check its condition first, then set a modest height.

Which Neon 1994-1999 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Neon first generation history

The first-generation Neon arrived in 1994 as a compact saloon and coupe, sold as a Dodge or Plymouth in North America and as a Chrysler in the UK. BC lists BCR-G-01 for it, as BR RH or RM MH.

Default rates are 6 kg/mm front and 4 kg/mm rear. Give the supplier the VIN, body and engine before ordering.

Chrysler launched the Neon for 1995 as a low-cost compact with independent suspension at both ends, using struts front and rear. UK sales began in 1996 under the Chrysler name.

It was popular in American club racing thanks to its light weight and simple layout. The UK received saloons only.

After nearly three decades, most cars need their bushes, mounts and strut tops inspecting before new suspension goes on.

Start with your Neon 1994-1999.

Confirm the chassis, year and existing suspension before choosing your setup.

White first-generation Chrysler Neon on silver wheels on a suburban street

Saloon

BC lists BCR-G-01 for the 1994-1999 Neon. Give the supplier the VIN and engine, and ask it to confirm the kit.

Check my Neon
Red first-generation Chrysler Neon saloon outside a brick workshop

Coupe and ACR

Ask BC to confirm the coupe and the competition-focused ACR, which have different factory set-ups.

Check my Neon coupe
Purple first-generation Chrysler Neon in a lay-by

Imported cars

Dodge- and Plymouth-badged cars are imports. Check the specification from the VIN.

Check my imported Neon

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing G-01 BR RH, subject to an application check

BC lists BCR-G-01 BR RH for the Neon. Have the application checked before ordering.

Read the buying advice

BCR-G-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing G-01 RM MH, subject to an application check

BC's RM MH version has an inverted front damper. Confirm it suits your car and use.

Read the buying advice

Tell the supplier how you drive and what tyres you use, and agree spring rates and starting settings for that use. Confirm the supplied mounts for this version.

  • Confirm the version
  • Give tyre details
  • Agree rates and settings
View current configurations

Have the bushes, mounts and strut tops checked before fitting new suspension.

Read the buying advice

Ask the workshop to inspect the strut top mounts, control-arm bushes and subframe. Replace worn parts so the new suspension can do its job.

  • Inspect bushes and mounts
  • Repair worn parts
  • Then set the height
Discuss my older Neon

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Chrysler Neon, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Neon uses struts with the spring around the damper, so a coilover kit replaces like with like. BC lists default rates of 6 kg/mm front and 4 kg/mm rear.

Ask BC what the kit supplies at the top mounts and spring seats, and check the alignment at the final ride height.

Read about ride height and spring preload
Green first-generation Chrysler Neon standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Inspect bushes and mounts

Have the strut tops, bushes and subframe inspected for wear and replace worn parts before fitting.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Neon 1994-1999 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-G-01 is listed for the 1994-1999 Neon, as BR RH or RM MH. It has 30-way rebound adjustment and default rates of 6 kg/mm front and 4 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Neon 1994-1999 kits

Find your Neon 1994-1999 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Neon 1994-1999 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Neon 1994-1999 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and body.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Chrysler Neon 1994-1999 coilovers.

Check the details before choosing your kit.

Does it fit the 2000-2005 Neon?

No. The second generation has its own BC reference, BCR-G-02.

What is the difference between BR and RM?

BR RH is BC's recommended road configuration. RM MH uses an inverted damper for harder use.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Neon. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Neon's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.