
Citroen C4 2004-2010.
The coilover guide.
Shop the coiloversSPAX lists two kits for the first C4: one with a fixed 30 mm rear drop and one with adjustable rear height. Decide which you need, then confirm the engine.
Citroen C4 history
The first-generation C4 was sold from 2004 to 2010 as a three-door coupe and five-door hatch, with the VTS as the sporting coupe. SPAX lists RSX781 and RSX782 for the saloon and coupe from November 2004.
Both give 35-65 mm of front lowering. RSX781 has a fixed 30 mm rear drop, while RSX782 offers 35-65 mm of rear adjustment.
Citroen launched the C4 in 2004 to replace the Xsara, with a distinctive coupe and a more practical five-door. It used struts at the front and a torsion-beam rear axle with coil springs, unlike the torsion-bar Xsara.
The VTS coupe used a 2.0-litre 16-valve engine, and the C4 WRC won the World Rally Championship. The Picasso MPV is a different car.
The second-generation C4 from 2010 uses different parts and needs its own application.
Start with your C4 2004-2010.
Confirm the chassis, year and existing suspension before choosing your setup.

Coupe and VTS
SPAX lists RSX781 and RSX782 for the C4 coupe and saloon with 1.4, 1.6, 2.0 and HDi engines from November 2004. Give the supplier the engine and build date.
Check my C4 coupe
Five-door hatch
Ask SPAX to confirm the five-door hatch, which its catalogue lists alongside the saloon and coupe. Confirm the engine before ordering.
Check my C4 hatch
Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
SPAX lists RSX781 with 35-65 mm front lowering and a fixed 30 mm rear drop.
Read the buying advice
RSX781 combines adjustable damping with front height adjustment. The rear drop is fixed at 30 mm in SPAX's catalogue, measured from the original suspension. Confirm the engine and delivery timing.
- Confirm the engine
- Accept a fixed rear drop
- Include alignment
SPAX lists RSX782 with 35-65 mm of lowering front and rear.
Read the buying advice
RSX782 adds rear height adjustment, so you can balance the car front to rear. Agree the height with the fitter and keep enough travel for the roads you use.
- Confirm the engine
- Balance front and rear
- Include alignment
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Know how the rear beam works
On a standard Citroen C4, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The first C4 has a torsion-beam rear axle with the coil spring mounted separately from the damper. RSX781 uses a fixed 30 mm rear drop; RSX782 adds rear height adjustment.
A beam axle has little alignment adjustment, so check the rear readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Choose fixed or adjustable rear height
Decide whether you want to adjust the rear height. RSX781 fixes the rear drop at 30 mm; RSX782 adjusts it.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current C4 2004-2010 range.
Compare the controls and hardware included in each range.
RSX781 and RSX782 are listed for the C4 saloon and coupe with 1.4, 1.6, 2.0, 1.6 HDi and 2.0 HDi engines from November 2004. Both have adjustable damping and 35-65 mm of front lowering; RSX781 has a fixed 30 mm rear drop and RSX782 35-65 mm of rear adjustment.
View SPAX C4 2004-2010 kitsFind your C4 2004-2010 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All C4 2004-2010 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

SPAX · RSX781
SPAX RSX Coilover Kit for Citroen applications - RSX781
Check the exact application

SPAX · RSX782
SPAX RSX Coilover Kit for Citroen applications - RSX782
Check the exact application
All C4 2004-2010 kit links and part numbers
Before you order.
Identify your car
Send the body, engine, build date and VIN.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Citroen C4 2004-2010 coilovers.
Check the details before choosing your kit.
What is the difference between RSX781 and RSX782?
RSX781 has a fixed 30 mm rear drop. RSX782 adds 35-65 mm of rear height adjustment.
Does it fit the C4 Picasso?
No. The Picasso is a different car. Ask SPAX separately.
Does it fit the 2010-on C4?
No. The second-generation C4 uses different parts.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every C4. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the C4's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



