
Citroen DS3.
The coilover guide.
Shop the coiloversThe DS3 was built with two front strut sizes, 47 mm and 51 mm, and the kits are split the same way. Check which your car has before anything else.
Citroen DS3 history
The DS3 was Citroen's premium three-door hatch from 2009, renamed DS 3 when DS became a separate brand. BC lists BCR-K-07 for cars with 51 mm front struts, BCR-K-10 for 47 mm struts, and BCR-K-25 for 2016-2019 cars. SPAX lists RSX120 for 51 mm hub cars only.
The strut size usually follows the engine and trim, but the only safe way to know is to check the car. Give the supplier the VIN and engine, and ask it to confirm the strut diameter.
Citroen launched the DS3 in 2009, based on the C3 but with its own body, floating roof and wide personalisation options. Performance versions included the THP 155 and the DS3 Racing, and a cabrio followed in 2013.
Front strut diameter varies across the range, which is why BC and SPAX both separate their kits. Using the wrong size means the kit will not fit the hub.
From 2015 the car was sold as the DS 3, and BC lists a separate reference for 2016-2019 cars.
Start with your DS3.
Match the model year, drivetrain and body style before comparing brands.

2009-2015 with 51 mm struts
BC lists BCR-K-07 for 2009-2015 cars with 51 mm front struts, in BR RN or RM MA form, at 5 kg/mm front and 2.5 kg/mm rear. SPAX lists RSX120 for 51 mm hub cars only, with 20-50 mm of lowering. Confirm the strut size first.
Check my 51 mm DS3
2009-2015 with 47 mm struts
BC lists BCR-K-10 for cars with 47 mm front struts, also in BR RN or RM MA form. The SPAX kit does not cover 47 mm cars. Ask the supplier to confirm the strut size from the VIN.
Check my 47 mm DS3
2016-2019 DS 3
BC lists BCR-K-25 for 2016-2019 cars, at 5.5 kg/mm front and 3 kg/mm rear. Ask BC to confirm the strut size and engine for your car.
Check my DS 3Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-K-07 BR RN for 51 mm cars. Measure or confirm the strut size before ordering.
Read the buying advice
BCR-K-07 is a possible starting point for a 51 mm car once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use.
- Confirm 51 mm struts
- Leave room for movement
- Include alignment
BC lists BCR-K-10 for 47 mm cars. The 51 mm kits will not fit.
Read the buying advice
BCR-K-10 BR RN is the 47 mm version of the same kit. Confirm the strut size from the VIN or by measurement, and agree a height that keeps enough travel.
- Confirm 47 mm struts
- Leave room for movement
- Include alignment
SPAX lists RSX120 for DS3s with 51 mm hubs only, with 20-50 mm of lowering front and rear.
Read the buying advice
RSX120 combines adjustable damping with height adjustment. SPAX's lowering figures depend on the original suspension. Confirm the 51 mm hub and agree delivery timing, as it is listed on backorder.
- Confirm 51 mm hubs
- Check the lowering range
- Confirm delivery timing
Know how the rear beam works
On a standard Citroen DS3, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The DS3 has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists 5 kg/mm front and 2.5 kg/mm rear for its 2009-2015 kits; the springs sit in different positions, so the figures are not a direct comparison.
A beam axle has little alignment adjustment, so check the rear readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Confirm the front strut diameter before the kit is ordered. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the strut size
Check whether the car has 47 mm or 51 mm front struts. The kits are not interchangeable.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current DS3 range.
Compare the controls and hardware included in each range.
BCR-K-07 is listed for 2009-2015 DS3s with 51 mm struts and BCR-K-10 for 47 mm struts, both as BR RN or RM MA at 5 kg/mm front and 2.5 kg/mm rear. BCR-K-25 is listed for 2016-2019 cars at 5.5 kg/mm front and 3 kg/mm rear. All have 30-way rebound adjustment.
View BC Racing DS3 kitsRSX120 is listed for DS3s with 51 mm hubs only, from 2009, with adjustable damping and 20-50 mm of lowering front and rear. Those figures depend on the car's original suspension.
View SPAX DS3 kitsFind your DS3 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
4 listings
Selected application: All DS3 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

BC Racing · BCR-K-07
BC Racing Coilovers - Citroen Ds3 (Strut 51mm) (09-15)
Check the exact application

SPAX · RSX120
SPAX RSX Coilover Kit for Citroen DS3 (51 mm hub only) - RSX120
Check the exact application

BC Racing · BCR-K-25
BC Racing Coilovers - Citroen Ds3 (16-19)
Check the exact application

BC Racing · BCR-K-10
BC Racing Coilovers - Citroen Ds3 (Strut 47mm) (09-15)
Check the exact application
All DS3 kit links and part numbers
Before you order.
Identify your car
Send the VIN, engine and build date, and the front strut diameter if known.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Citroen DS3 coilovers.
Check the details before choosing your kit.
How do I know if my DS3 has 47 mm or 51 mm struts?
Ask the supplier to check from the VIN, or have a workshop measure the strut. The kits are made for one size or the other.
Does it fit the DS3 Cabrio?
Ask the supplier to confirm the Cabrio and its strut size before ordering.
Does a C3 kit fit the DS3?
No. The DS3 has its own references.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every DS3. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the DS3's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.




