Red Citroen Xsara VTS coupe on alloy wheels in a Cotswolds lay-by

Citroen Xsara.
The coilover guide.

Shop the coilovers

SPAX lists one coilover kit for every Xsara. The rear uses torsion bars, so ask how the height is set there before ordering.

Which Xsara do you have?1 listed kit · 1 brandReviewed 21 November 2026

Citroen Xsara history

The Xsara was Citroen's family hatch from 1997 to 2004, sold as a five-door, three-door coupe and estate, with the VTS as the sporting model. SPAX lists RSX779 for all models.

Like many Citroens of its time, the rear axle uses torsion bars rather than coil springs, which affects how the rear height is set.

Citroen launched the Xsara in 1997 to replace the ZX, using a similar layout with struts at the front and a trailing-arm rear axle with torsion bars. The VTS coupe had a 2.0-litre 16-valve engine, and the Xsara won the World Rally Championship in WRC form.

A facelift followed in 2000, and the C4 replaced it in 2004. The Xsara Picasso MPV is a different car.

After two decades, check the rear axle bearings and bushes, a known wear point on Citroens of this era, before fitting new suspension.

Start with your Xsara.

Confirm the chassis, year and existing suspension before choosing your setup.

White Citroen Xsara coupe on silver wheels on a country lane

Coupe and VTS

SPAX lists RSX779 for all Xsara models from 1997. Give the supplier the VIN and engine, and ask it to confirm the kit and how the rear height is set.

Check my Xsara coupe
Green Citroen Xsara five-door outside a brick workshop

Five-door and estate

Ask SPAX to confirm the five-door and estate, and tell the supplier how the car is usually loaded.

Check my Xsara hatch
Red Citroen Xsara VTS coupe in a lay-by

Xsara Picasso

The Xsara Picasso is a different car. Ask SPAX about it separately.

Check my Xsara Picasso

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX779, subject to an exact-car check

SPAX lists RSX779 for all Xsara models, with adjustable damping and 35-65 mm of lowering front and rear.

Read the buying advice

RSX779 is a possible starting point once SPAX has confirmed fitment for your car. Its catalogue lowering figures depend on the original suspension. Ask SPAX how the rear height is set, and keep enough travel for the roads you use.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Xsara

Rear axle bearings and bushes are a known wear point on Citroens of this age.

Read the buying advice

Ask the workshop to check the rear axle bearings and bushes before fitting new suspension. Repair any wear first, then set the height.

  • Check the rear axle
  • Repair worn parts
  • Then set the height
Discuss my Xsara's rear axle

Know how the rear axle works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Citroen Xsara, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Xsara has a trailing-arm rear axle using torsion bars rather than coil springs. SPAX's catalogue lists 35-65 mm of lowering at both ends for RSX779, so ask SPAX how the rear height is set on this car.

Rear height on a torsion-bar axle is usually adjusted at the bar itself. Agree the method with the fitter, and check the rear alignment at the final ride height.

Read about ride height and spring preload
Silver Citroen Xsara standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Inspect the rear axle

Have the rear axle bearings and bushes checked for wear, and repair them before fitting new suspension.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Xsara range.

See the controls and hardware in the listed kit.

SPAX

RSX779 is listed for all Xsara models from 1997, with adjustable damping and 35-65 mm of lowering front and rear in the catalogue. Those figures depend on the car's original suspension. Ask SPAX how the rear height is set on the torsion-bar axle.

View SPAX Xsara kits

Find your Xsara coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Xsara applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Xsara kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and body, and how the car is usually loaded.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Citroen Xsara coilovers.

Check the details before choosing your kit.

Does the Xsara have rear coil springs?

No. The rear axle uses torsion bars. Ask SPAX how the rear height is set with RSX779.

Does it fit the Xsara Picasso?

No. The Picasso is a different car. Ask SPAX separately.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Xsara. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Xsara's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.