Red Citroen ZX Volcane on alloy wheels in a Cotswolds lay-by

Citroen ZX.
The coilover guide.

Shop the coilovers

SPAX lists the ZX from a specific ID code in June 1992. Check the car's code first, then plan around its torsion-bar rear axle.

Which ZX do you have?1 listed kit · 1 brandReviewed 21 November 2026

Citroen ZX history

The ZX was Citroen's compact hatch from 1991 to 1998, with the Volcane as the sporting three-door. SPAX lists RSX780 for ZX models from ID code 5684, June 1992 on.

Its rear axle uses torsion bars and was designed to steer slightly in corners, which gave the ZX its agile feel.

Citroen launched the ZX in 1991 between the AX and BX. Its rear axle used torsion bars with bushes designed to let the rear wheels steer slightly under load, a feature praised in road tests.

The Volcane offered 1.9 and later 2.0 16-valve engines, and the ZX won the Paris-Dakar rally in rally-raid form. It was replaced by the Xsara.

Most ZXs are now classics. Check the rear axle bearings and bushes before fitting new suspension.

Start with your ZX.

Confirm the chassis, year and existing suspension before choosing your setup.

White Citroen ZX three-door on silver wheels on a village street

Three-door and Volcane

SPAX lists RSX780 for ZX models from ID code 5684. Give the supplier the VIN, engine and ID code, and ask it to confirm the kit.

Check my ZX Volcane
Grey Citroen ZX five-door outside a brick workshop

Five-door and estate

Ask SPAX to confirm the five-door and estate, and how the rear height is set on the torsion-bar axle.

Check my ZX five-door
Red Citroen ZX Volcane in a lay-by

Cars before June 1992

SPAX lists the ZX from ID code 5684. For an earlier car, ask SPAX before ordering.

Check my early ZX

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX780, subject to an exact-car check

SPAX lists RSX780 for ZX models from ID code 5684, June 1992 on, with 35-65 mm of lowering front and rear.

Read the buying advice

RSX780 is a possible starting point once SPAX has confirmed fitment. SPAX lists it from ID code 5684, so check the car's code first. Keep the drop modest on an older car, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my ZX

Rear axle bearings and bushes are a known wear point on Citroens of this age.

Read the buying advice

Ask the workshop to check the rear axle bearings and bushes before fitting new suspension. Repair any wear first, then set the height.

  • Check the rear axle
  • Repair worn parts
  • Then set the height
Discuss my ZX's rear axle

Know how the rear axle works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Citroen ZX, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The ZX has a trailing-arm rear axle using torsion bars, and its rear wheels steer slightly under cornering loads by design. SPAX lists 35-65 mm of lowering at both ends for RSX780.

Ask SPAX how the rear height is set on this axle, and check the rear alignment at the final ride height.

Read about ride height and spring preload
Blue Citroen ZX standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Find the ID code

Check the car's ID code and build date. SPAX lists RSX780 from ID code 5684, June 1992.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current ZX range.

See the controls and hardware in the listed kit.

SPAX

RSX780 is listed for ZX 1.4 and 1.6 models and for the 1.8, 1.9, diesel and 2.0 models, all from ID code 5684, June 1992 on. The catalogue gives 35-65 mm of lowering front and rear. Ask SPAX about earlier cars and how the rear height is set.

View SPAX ZX kits

Find your ZX coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All ZX applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All ZX kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, body and ID code.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Citroen ZX coilovers.

Check the details before choosing your kit.

What is the ID code?

Citroen's production identification code. SPAX lists RSX780 from code 5684, June 1992. Ask SPAX about earlier cars.

Does the ZX have rear coil springs?

No. The rear axle uses torsion bars. Ask SPAX how the rear height is set.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every ZX. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the ZX's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.