
CMC J Space Van RWD (2024).
The coilover guide.
Shop the coiloversCheck a proposed ride height with your usual passengers, tools or camper equipment aboard. Before choosing BC's YP-01 kit, ask CMC about its warning against suspension changes on vans with adaptive cruise control or lane assistance.
The J Space van launched in 2024.
BC lists YP-01 BR RS for J Space Van RWD from 2024. CMC's manual explicitly warns against suspension modification in the adaptive cruise control and lane-assistance sections. Give CMC and the installer your exact build and equipment details before ordering. BC's application listing does not establish factory approval for those systems.
The rear of this van uses leaf springs and separate dampers. BC's application photograph shows front coilover struts, rear dampers and block-and-U-bolt hardware. Confirm the parts supplied for your order and the instructions for that assembly; the rear requires a different height-setting approach from a coil-spring suspension.
Tell the workshop what the van carries on an ordinary day and at its heaviest. Include passengers, working equipment or a planned camper interior, along with wheel and tyre sizes. Those details belong in the initial enquiry, before anyone agrees a finished height.
CMC announced J Space on 19 November 2024, with van and truck versions. BC's YP-01 application names the rear-wheel-drive van. The truck, four-wheel-drive models and older Veryca applications need their own fitment checks.
CMC's owner manual shows a rear leaf pack below the axle, held with U-bolts. The dampers sit separately from the leaf springs. This layout is the starting point for checking the rear hardware and existing alterations on your van.
The current CMC website describes the 2026 COSSI range. Its grades, equipment and load figures should not be applied to every van built from 2024. Confirm the build date and actual specification, especially on an imported vehicle or one that has been converted.
Start with your J Space Van RWD (2024).
Confirm the chassis, year and existing suspension before choosing your setup.

J Space Van RWD: check YP-01
Send the build date, market specification, driver-assistance equipment and photographs of the fitted suspension. BC lists YP-01 BR RS for the van from 2024. CMC's manual says not to modify the suspension in its adaptive cruise control and lane-assistance warnings; resolve this with CMC and the installer before ordering. Confirm the exact supplied hardware and instructions too.
Check my J Space applicationHow will you use your van?
Plan the height around daily driving, working loads or a camper conversion.
Describe your usual roads and the people or luggage you carry.
Read the buying advice
Discuss the entrances, speed humps and rough stretches you use regularly. Have the fitter assess ground clearance and suspension travel with your normal passengers and luggage. Bring wheel and tyre measurements if you plan to change them, and explain any previous suspension work.
- Describe your usual roads and passengers
- Provide wheel and tyre measurements
- Assess clearance with normal loads
Include the equipment that stays aboard and the loads that change each day.
Read the buying advice
Give the workshop the weight and position of fixed equipment, plus the van's usual and heaviest working loads. Ask it to inspect the rear leaf packs and existing lowering hardware before discussing height. Retain the vehicle's own load and axle limits in the plan; a suspension kit does not increase them.
- List fixed equipment and working loads
- Check leaf packs and existing hardware
- Use your van's own load limits
Account for the finished interior and everything carried on a trip.
Read the buying advice
Describe the planned furniture and fixed equipment, then add occupants, water and luggage to the weight assessment. Tell the converter and suspension installer where that weight will sit. They need to assess the completed van's axle loads, clearance and remaining suspension travel before agreeing any height change.
- Describe the completed interior
- Include occupants and trip supplies
- Assess finished axle loads and clearance
Leaf springs with separate rear dampers.
The leaf packs carry the rear of the van, with separate dampers controlling their movement. CMC's manual shows the leaf pack below the axle and its U-bolt attachment. Have the fitter inspect the springs, bushes, mountings and any existing blocks or other alterations.
BC's exact YP-01 photograph shows rear dampers alongside four blocks and four U-bolts. Confirm which parts your order includes, the block dimensions and BC's instructions before any work. The fitter needs the instructions and tightening torques for the supplied hardware. Rear height needs to be assessed with the leaf-spring hardware and usable damper travel; this application does not show a rear coilover conversion.
Understand ride height and spring preload
Check the factory warning before booking the work.
Ask CMC about the suspension-modification warning for your van's build and driver-assistance equipment, and give that guidance to the installer. The manual's adaptive cruise control and lane-assistance sections say not to modify the suspension. Alignment or steering calibration should not be treated as a way to override that instruction.
Before any agreed work starts, confirm the supplied mounting parts, rear hardware and anything retained from the van. The workshop needs to assess loaded clearance, leaf-spring condition and available travel. Include alignment and the vehicle checks required for the exact build, and keep the measurements and settings with the fitting record.
Driver-assistance equipment
Identify the van's fitted systems and resolve CMC's explicit suspension warning before ordering. Give the installer the manufacturer's guidance for that vehicle. A BC fitment listing and an alignment booking do not establish compatibility with factory assistance systems.
Leaf packs and rear hardware
Declare existing blocks, altered leaf packs and changed axle or damper mountings. Have their condition inspected. Confirm the supplied rear dampers, blocks and U-bolts against the exact kit instructions, including how the proposed height affects usable travel.
Wheels and loaded clearance
Provide wheel widths, offsets, tyre sizes and any spacer measurements. Have the fitter assess clearance through steering and suspension movement with representative loads. Include the underside of the van and the ramps or entrances it must use.
Equipment and conversion weight
Include fitted shelving, tools or a camper interior when describing the van's use. Record axle loads where needed and use the limits for the exact vehicle. Do not borrow a payload figure from the J Space truck or assume suspension changes increase carrying capacity.
The current J Space Van RWD (2024) range.
See the controls and hardware in the listed kit.
BC identifies YP-01 BR RS for J Space Van RWD from 2024. Its exact application photograph shows two front coilover struts, two separate rear dampers, four blocks, four U-bolts and three spanners. Confirm the fulfilled contents and fitting instructions before ordering. BC leaves both default spring-rate fields blank on its tested-vehicle sheet, so ask for the specification supplied with your kit.
View BC Racing J Space Van RWD (2024) kitsFind your J Space Van RWD (2024) coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All J Space Van RWD (2024) applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

BC Racing · BCR-YP-01
BC Racing Coilovers - Cmc J Space Van RWD (24+)
Check the exact application
All J Space Van RWD (2024) kit links and part numbers
Before you order.
Identify your van
Give the J Space van's build date, market specification and fitted driver-assistance equipment; resolve CMC's suspension-modification warning first.
Match the kit
Check the rear-wheel-drive van application separately from the truck, 4WD and older Veryca models.
Check what’s included
Confirm the supplied front assemblies, rear dampers, blocks, U-bolts and mounting parts against the exact instructions.
Check your modifications
Provide wheel and tyre measurements, existing suspension changes and representative loads, including fixed equipment or a planned conversion.
Plan fitting
Agree inspection, loaded-clearance and travel checks, alignment and required vehicle checks before booking the installation.
Questions about CMC J Space Van RWD (2024) coilovers.
Check the details before choosing your kit.
Which kit is listed for the J Space van?
BC lists YP-01 BR RS for J Space Van RWD from 2024. Confirm your build, equipment and fitted suspension before ordering. CMC's suspension-modification warning also needs resolving for the exact vehicle; BC's listing alone does not establish factory approval.
Does this application cover the truck, 4WD or older Veryca?
The listing names J Space Van RWD. The truck, four-wheel-drive versions and older Veryca A180/A190 need separate application confirmation. An open-ended 2024-onwards date does not establish coverage of every later grade or model.
Does the J Space have rear coilovers?
The original van uses rear leaf springs with separate dampers. CMC's manual shows the leaf pack below the axle with U-bolt attachments. BC's YP-01 photograph shows separate rear dampers and block-and-U-bolt hardware; it does not show replacement rear coilover units.
What does BC show in the YP-01 package?
The exact manufacturer photograph shows two front coilover struts, two rear dampers, four blocks, four U-bolts and three spanners. Confirm the parts fulfilled with your order, block dimensions, mounting parts and instructions. The photograph is not an installation guide.
Which spring rates does BC publish for this application?
BC's YP-01 tested-vehicle sheet leaves the front and rear default spring-rate fields blank. Ask for the front spring specification supplied with your order. A blank or X in a rear-rate field is not a zero spring rate and does not identify a rear coil spring; this van uses rear leaf springs.
How much should I lower my J Space?
Resolve the factory suspension warning before choosing a height. BC publishes height figures for a tested 2024 van, but those measurements are not a recommendation for every vehicle or load. Have the workshop assess loaded ground clearance, wheel clearance and suspension travel, with the rear leaf-spring hardware considered separately from the front struts.
Can alignment or calibration resolve CMC's suspension warning?
CMC's manual explicitly says not to modify the suspension in its adaptive cruise control and lane-assistance warnings. It also says suspension changes, tyres, incorrect alignment and an uncalibrated steering system can affect lane-keeping performance. It does not say alignment or calibration cancels the modification warning. Ask CMC about your exact build and equipment before ordering, and give its guidance to the installer.
What should I tell the fitter about working loads?
Give the weight and position of fixed equipment, your usual load and the heaviest load you carry. Include passengers and existing suspension alterations. Use the limits for your own van; the truck's payload figure does not establish the van's capacity, and a suspension kit does not increase its rated limits.
What changes when the van is being converted into a camper?
The planned interior and trip supplies need to be included in the load assessment. Give the converter and suspension installer the position and weight of fixed equipment, occupants, water and luggage. Assess the finished axle loads, ground clearance and suspension travel, and address CMC's suspension warning during planning.
Are daily driving, working loads and camping different kits?
There is one listed J Space Van RWD application here. The three enquiries help you describe the van's use and loads. They do not select separate priced kits, different payload ratings or a confirmed suspension specification.
Let’s talk suspension.
Send your J Space van's build and equipment details with photographs of its suspension. Include the loads it carries, any conversion plans and CMC's guidance on the suspension warning before discussing an order.



