
Cupra Ateca KH7.
The coilover guide.
Shop the coiloversEibach makes two Ateca kits, split by the factory dampers. Check whether your car has adaptive dampers first, then set the height around loads and travel.
Cupra Ateca history
The Cupra Ateca is the performance version of the SEAT Ateca SUV, with a 2.0 TSI engine and 4Drive all-wheel drive. Eibach lists PSS65-81-015-05-22 for cars without electronic suspension and PSS65-81-015-06-22 for cars with electronic damper control.
Both list axle-load limits of 1,120 kg front and 1,110 kg rear, 35-55 mm front and 25-50 mm rear adjustment, and exclude cars with levelling control.
Cupra launched the Ateca in 2018 as the first model of its new performance brand, based on the SEAT Ateca and using the Volkswagen Group's 2.0 TSI engine and 4Drive all-wheel drive.
Adaptive Dynamic Chassis Control (DCC) is fitted to many cars. A coilover kit with manual damping replaces it, which is why Eibach's -06 kit includes a unit to suppress the fault message.
As a family SUV, the Ateca often carries passengers and luggage. Keep enough travel for that at the new height.
Start with your Ateca KH7.
Confirm the chassis, year and existing suspension before choosing your setup.

Without adaptive dampers
Eibach lists PSS65-81-015-05-22 for the Cupra Ateca 2.0 TSI 4Drive from September 2018, excluding electronic suspension. Give the supplier the VIN and options list, and ask it to confirm the kit.
Check my Cupra Ateca
With adaptive dampers (DCC)
Eibach lists PSS65-81-015-06-22 for cars with series electronic damper control. It includes a PRO-TRONIC unit to suppress the fault message; the adaptive damping function no longer works.
Check my DCC Ateca
SEAT Ateca
These references are for the Cupra Ateca. A SEAT Ateca has different engines and suspension; ask the supplier about it separately.
Check my SEAT AtecaChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
Eibach lists PSS65-81-015-05-22 for Cupra Atecas without electronic suspension. Confirm the options first.
Read the buying advice
Eibach gives 35-55 mm front and 25-50 mm rear adjustment, with the front set on the threaded strut. Some cars may need extra original parts for installation. Keep enough travel for a loaded family car, and include alignment.
- Confirm no DCC
- Check the axle-load limits
- Include alignment
Eibach's -06 kit is for cars with electronic damper control and includes PRO-TRONIC.
Read the buying advice
The PRO-TRONIC unit suppresses the fault message after fitting, and the adaptive damping function no longer applies. Confirm the car has DCC, and agree the fitting with the workshop.
- Confirm DCC
- Accept fixed damping modes
- Include alignment
Tell the supplier about loads and towing so the height keeps enough travel.
Read the buying advice
Give the supplier the car's usual load and any towing weight, and check them against Eibach's axle-load limits. Set the height with the car in its normal state.
- Describe usual loads
- Check axle loads
- Check height loaded
Know how the rear is set
On a standard Cupra Cupra Ateca, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Cupra Ateca has a multi-link rear with the spring mounted separately from the damper. Eibach adjusts the front height on the threaded strut and the rear on a separate adjustable unit.
Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with DCC, agree in advance how the factory damper wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Check for DCC
Confirm from the VIN data whether the car has adaptive dampers (DCC). It decides which Eibach reference applies.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car carries or tows. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Ateca KH7 range.
Compare the controls and hardware included in each range.
PSS65-81-015-05-22 is listed for the Cupra Ateca 2.0 TSI 4Drive from September 2018, excluding electronic suspension; -06-22 is for cars with electronic damper control and includes PRO-TRONIC. Both list axle loads of 1,120 kg front and 1,110 kg rear and 35-55 mm front and 25-50 mm rear adjustment, and exclude levelling control.
View Eibach Ateca KH7 kitsFind your Ateca KH7 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All Ateca KH7 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Eibach · PSS65-81-015-05-22
Eibach Pro-Street S Coilover Kit for Cupra ATECA (KH7) - PSS65-81-015-05-22
Check the exact application

Eibach · PSS65-81-015-06-22
Eibach Pro-Street S Coilover Kit for Cupra ATECA (KH7) - PSS65-81-015-06-22
Check the exact application
Before you order.
Identify your car
Send the VIN, build date and options list, including DCC and any towbar.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any DCC wiring work. Confirm delivery timing before reserving workshop time.
Questions about Cupra Ateca KH7 coilovers.
Check the details before choosing your kit.
How do I know if my Ateca has DCC?
Check the options list or VIN data. It decides whether the -05 or -06 Eibach kit applies.
What happens to the drive modes?
With the -06 kit, the PRO-TRONIC unit suppresses the fault message and adaptive damping no longer works.
Does it fit a SEAT Ateca?
These references are listed for the Cupra Ateca. Ask the supplier about a SEAT Ateca separately.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Cupra Ateca. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Cupra Ateca's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.


