Matte blue Cupra Formentor VZ, lightly lowered on copper wheels in a Peak District lay-by

Cupra Formentor KM7.
The coilover guide.

Shop the coilovers

Eibach makes two Formentor kits, split by the factory dampers, for the 2.0 TSI and 2.0 TDI 4Drive. Check for DCC first, then set the height.

Which Formentor KM7 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Cupra Formentor history

The Formentor is Cupra's own crossover, launched in 2020 on the Volkswagen Group MQB Evo platform. Eibach lists PSS65-81-019-01-22 for 4Drive cars without electronic suspension and PSS65-81-019-02-22 for cars with electronic damper control.

Both list the 2.0 TSI and 2.0 TDI 4Drive from July 2020, axle loads of 1,130 kg front and 1,090 kg rear, and 40-60 mm front and 40-65 mm rear adjustment.

Cupra launched the Formentor in 2020 as the first car designed solely for the brand. It is offered with front- and all-wheel drive, petrol, diesel and plug-in hybrid engines, with the VZ versions at the top.

Many cars have Dynamic Chassis Control adaptive dampers. Eibach's -02 kit is for those cars and includes a unit to suppress the fault message.

The listed kits cover 4Drive cars. Ask the supplier before ordering for a front-drive or plug-in hybrid Formentor.

Start with your Formentor KM7.

Confirm the chassis, year and existing suspension before choosing your setup.

White Cupra Formentor on silver wheels on a country lane

4Drive without DCC

Eibach lists PSS65-81-019-01-22 for the 2.0 TSI and 2.0 TDI 4Drive from July 2020, excluding electronic suspension and levelling control. Give the supplier the VIN and options list.

Check my Formentor
Grey Cupra Formentor with its rear light bar, outside a modern workshop

4Drive with DCC

Eibach lists PSS65-81-019-02-22 for cars with series electronic damper control. It includes a PRO-TRONIC unit to suppress the fault message; adaptive damping no longer works.

Check my DCC Formentor
Matte blue Cupra Formentor VZ in a lay-by

Front-drive and e-Hybrid

These references list 4Drive engines. Ask the supplier before ordering for a front-drive or plug-in hybrid Formentor.

Check my front-drive Formentor

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · Eibach Pro-Street S, subject to an exact-car check

Eibach lists PSS65-81-019-01-22 for 4Drive Formentors without electronic suspension.

Read the buying advice

Eibach gives 40-60 mm front and 40-65 mm rear adjustment, with the front set on the threaded strut. Some cars may need extra original parts. Agree a height that keeps travel, and include alignment.

  • Confirm 4Drive and no DCC
  • Check the axle-load limits
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · Eibach Pro-Street S for DCC cars, subject to an exact-car check

Eibach's -02 kit is for cars with electronic damper control and includes PRO-TRONIC.

Read the buying advice

The PRO-TRONIC unit suppresses the fault message after fitting, and the adaptive damping function no longer applies. Confirm the car has DCC before ordering.

  • Confirm DCC
  • Accept fixed damping modes
  • Include alignment
View current configurations

The listed kits are for 4Drive cars. Ask before ordering for other versions.

Read the buying advice

Give the supplier the engine and drivetrain, and ask whether a kit is listed for your car. Do not assume a 4Drive kit suits a front-drive or plug-in hybrid car.

  • Confirm the drivetrain
  • Confirm the engine
  • Ask about availability
Discuss my front-drive Formentor

Know how the rear is set

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Cupra Formentor, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The 4Drive Formentor has a multi-link rear with the spring mounted separately from the damper. Eibach adjusts the front height on the threaded strut and the rear on a separate adjustable unit.

Check the alignment at the final ride height.

Read about ride height and spring preload
Black Cupra Formentor standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with DCC, agree in advance how the factory damper wiring will be handled. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Check for DCC and the drivetrain

Confirm from the VIN data whether the car is 4Drive and whether it has adaptive dampers (DCC).

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Formentor KM7 range.

Compare the controls and hardware included in each range.

Eibach

PSS65-81-019-01-22 is listed for the Formentor 2.0 TSI and 2.0 TDI 4Drive from July 2020, excluding electronic suspension and levelling control; -02-22 is for cars with electronic damper control and includes PRO-TRONIC. Both list axle loads of 1,130 kg front and 1,090 kg rear, with 40-60 mm front and 40-65 mm rear adjustment.

View Eibach Formentor KM7 kits

Find your Formentor KM7 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Formentor KM7 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Formentor KM7 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, drivetrain and options list, including DCC.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together, including any DCC wiring work. Confirm delivery timing before reserving workshop time.

Questions about Cupra Formentor KM7 coilovers.

Check the details before choosing your kit.

Does it fit a front-drive Formentor?

The listed kits are for 4Drive cars. Ask the supplier about front-drive versions.

What happens to the drive modes with DCC?

With the -02 kit, the PRO-TRONIC unit suppresses the fault message and adaptive damping no longer works.

Does it fit the e-Hybrid?

Ask the supplier. The listed engines are the 2.0 TSI and 2.0 TDI 4Drive.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Formentor. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Formentor's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.