
Cupra Leon Sportstourer KL8.
The coilover guide.
Shop the coiloversEibach lists three Leon Sportstourer kits, split by engine and factory dampers. Find out whether the car is a 4Drive or e-Hybrid and whether it has DCC first.
Leon Sportstourer KL8 history
The KL8 Leon Sportstourer is the estate version of the fourth-generation Leon, sold as both a SEAT and a Cupra. Eibach lists PSS65-79-016-02-22 for the 2.0 TSI 4Drive with electronic damper control, and PSS65-81-018-09-22 and -10-22 for the e-Hybrid without and with it.
The e-Hybrid kits are also listed for the SEAT Leon Sportstourer KL8. Give the supplier the engine and options list before ordering.
The fourth-generation Leon arrived in 2020 on the Volkswagen Group MQB Evo platform, with the Sportstourer estate sold as a SEAT and as a Cupra. Cupra versions include the 2.0 TSI 4Drive and the e-Hybrid plug-in hybrid.
Many cars have Dynamic Chassis Control adaptive dampers. Eibach's -02 and -10 kits are for those cars and include a unit to suppress the fault message.
The plug-in hybrid carries extra battery weight, which is why it has its own Eibach references.
Start with your Leon Sportstourer KL8.
Confirm the chassis, year and existing suspension before choosing your setup.

2.0 TSI 4Drive
Eibach lists PSS65-79-016-02-22 for the Cupra Leon Sportstourer 2.0 TSI 4Drive from June 2021, for cars with electronic damper control, with 15-40 mm of adjustment front and rear. Confirm the engine and DCC with the supplier.
Check my 4Drive Sportstourer
e-Hybrid
Eibach lists PSS65-81-018-09-22 for the e-Hybrid without electronic suspension and -10-22 for the e-Hybrid with electronic damper control, from October 2020, with 35-55 mm front and 30-50 mm rear adjustment.
Check my e-Hybrid
SEAT Leon Sportstourer
The e-Hybrid kits are also listed for the SEAT Leon Sportstourer KL8. Ask the supplier to confirm the engine and options for a SEAT.
Check my SEAT Leon STChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
Eibach lists PSS65-79-016-02-22 for the 4Drive with electronic damper control.
Read the buying advice
This kit includes a PRO-TRONIC unit to suppress the fault message; adaptive damping no longer works. Eibach gives 15-40 mm of adjustment front and rear and axle loads of 1,095 kg front and 1,110 kg rear. Confirm the engine and DCC first.
- Confirm 4Drive with DCC
- Check the axle-load limits
- Include alignment
Eibach lists PSS65-81-018-09-22 for the e-Hybrid without electronic suspension.
Read the buying advice
The e-Hybrid has its own references because of its battery weight. Eibach gives axle loads of 1,090 kg front and 1,050 kg rear, 35-55 mm front and 30-50 mm rear adjustment. Confirm the car has no DCC.
- Confirm e-Hybrid
- Confirm no DCC
- Include alignment
Eibach lists PSS65-81-018-10-22 for e-Hybrids with electronic damper control.
Read the buying advice
This kit includes PRO-TRONIC to suppress the fault message after fitting. Confirm the car has DCC, and use a workshop familiar with plug-in hybrids.
- Confirm DCC
- Use an EV-aware workshop
- Include alignment
Know how the rear is set
On a standard Cupra Leon Sportstourer, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.Eibach adjusts the front height on the threaded strut and the rear on a separate adjustable unit, keeping the spring separate from the damper at the rear.
Check the alignment at the final ride height, and remember the estate often carries heavy loads.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. On a car with DCC, agree in advance how the factory damper wiring will be handled; for an e-Hybrid, use a workshop familiar with plug-in hybrids. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Check the engine and DCC
Confirm from the VIN data whether the car is a 2.0 TSI 4Drive or e-Hybrid, and whether it has adaptive dampers (DCC).
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the estate usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Leon Sportstourer KL8 range.
Compare the controls and hardware included in each range.
PSS65-79-016-02-22 is listed for the Cupra Leon Sportstourer 2.0 TSI 4Drive from June 2021 with electronic damper control. PSS65-81-018-09-22 and -10-22 are listed for the e-Hybrid from October 2020, without and with electronic damper control, for both Cupra and SEAT. All exclude levelling control.
View Eibach Leon Sportstourer KL8 kitsFind your Leon Sportstourer KL8 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
3 listings
Selected application: All Leon Sportstourer KL8 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Eibach · PSS65-79-016-02-22
Eibach Pro-Street S Coilover Kit for Audi / Cupra / Skoda / Volkswagen applications - PSS65-79-016-02-22
Check the exact application

Eibach · PSS65-81-018-10-22
Eibach Pro-Street S Coilover Kit for Cupra LEON SPORTSTOURER (KL8) - PSS65-81-018-10-22
Check the exact application

Eibach · PSS65-81-018-09-22
Eibach Pro-Street S Coilover Kit for Cupra LEON SPORTSTOURER (KL8) - PSS65-81-018-09-22
Check the exact application
All Leon Sportstourer KL8 kit links and part numbers
- Eibach · PSS65-79-016-02-22: Eibach Pro-Street S Coilover Kit for Audi / Cupra / Skoda / Volkswagen applications - PSS65-79-016-02-22
- Eibach · PSS65-81-018-09-22: Eibach Pro-Street S Coilover Kit for Cupra LEON SPORTSTOURER (KL8) - PSS65-81-018-09-22
- Eibach · PSS65-81-018-10-22: Eibach Pro-Street S Coilover Kit for Cupra LEON SPORTSTOURER (KL8) - PSS65-81-018-10-22
Before you order.
Identify your car
Send the VIN, engine, build date and options list, including DCC.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together, including any DCC wiring work. Confirm delivery timing before reserving workshop time.
Questions about Cupra Leon Sportstourer KL8 coilovers.
Check the details before choosing your kit.
Which kit fits the e-Hybrid?
Eibach lists -09-22 for e-Hybrids without DCC and -10-22 for those with it.
Does it fit the Leon hatchback?
These references are listed for the Sportstourer estate. Ask the supplier about the KL1 hatchback.
Does it fit a SEAT Leon Sportstourer?
The e-Hybrid kits are also listed for the SEAT. Confirm the engine and options.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Leon Sportstourer. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Leon Sportstourer's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.


