Red first-generation Daihatsu Sirion on alloy wheels by a harbour road

Daihatsu Sirion 1998-2004.
The coilover guide.

Shop the coilovers

BC Racing lists one kit for the first-generation Sirion. Confirm the engine, check the car's condition, then keep the drop modest on a small, light car.

Which Sirion 1998-2004 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Daihatsu Sirion first generation history

The first Sirion was Daihatsu's small five-door hatch from 1998 to 2004, sold in the UK with 1.0 and 1.3 engines, including the lively 1.3 Sport. BC lists BCR-ZF-03 for it, with default rates of 4 kg/mm front and 3 kg/mm rear.

It is a light car with small wheels, so a big drop quickly uses up the suspension travel.

Daihatsu launched the Sirion in 1998 as a compact five-door supermini, known in some markets as the Storia. A facelift followed in 2001.

It uses struts at the front and a torsion-beam rear axle. The light weight is why BC's default rates are modest.

Daihatsu withdrew from the UK in 2013, so parts support now relies on specialists. Check the car's condition before fitting new suspension.

Start with your Sirion 1998-2004.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver first-generation Daihatsu Sirion on silver wheels on a town street

1.0 and 1.3

BC lists BCR-ZF-03 for the 1998-2004 Sirion. Give the supplier the VIN and engine, and ask it to confirm the kit.

Check my Sirion
Blue first-generation Daihatsu Sirion outside a brick workshop

1.3 Sport

Tell the supplier if the car is a Sport, which has its own factory set-up, and ask BC to confirm the kit.

Check my Sirion Sport
Red Daihatsu Sirion by a harbour road

Four-wheel drive

Some markets had four-wheel-drive Sirions. Ask BC before ordering for one.

Check my 4WD Sirion

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZF-03, subject to an application check

BC lists BCR-ZF-03 for the Sirion. Have the application checked before ordering.

Read the buying advice

BCR-ZF-03 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Sirion

Have the bushes and mounts checked before fitting new suspension.

Read the buying advice

Ask the workshop to inspect the strut top mounts, bushes and rear beam mounts. Replace worn parts, then set a modest height.

  • Inspect bushes and mounts
  • Repair worn parts
  • Then set the height
Discuss my older Sirion

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Daihatsu Sirion, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Sirion has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 4 kg/mm front and 3 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.

Read about ride height and spring preload
White first-generation Daihatsu Sirion standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Inspect bushes and mounts

Have the strut tops, bushes and rear beam mounts inspected and replace worn parts before fitting.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Sirion 1998-2004 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-ZF-03 is listed for the 1998-2004 Sirion under M112S. It has 30-way rebound adjustment and default rates of 4 kg/mm front and 3 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Sirion 1998-2004 kits

Find your Sirion 1998-2004 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Sirion 1998-2004 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Sirion 1998-2004 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and build date.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Daihatsu Sirion 1998-2004 coilovers.

Check the details before choosing your kit.

Does it fit the second-generation Sirion?

No. The 2004-2010 Sirion has its own BC reference, BCR-ZF-02.

How low should a small car go?

Keep the drop modest. Small wheels and short travel mean a big drop quickly hurts the ride.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Sirion. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Sirion's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.