Yellow second-generation Daihatsu Sirion on dark wheels by a seafront road

Daihatsu Sirion 2004-2010.
The coilover guide.

Shop the coilovers

BC Racing lists one kit for the second-generation Sirion. Confirm the engine, then keep the drop modest on a light city car.

Which Sirion 2004-2010 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Daihatsu Sirion second generation history

The second Sirion was built from 2004 alongside the Toyota Passo and Daihatsu Boon, and sold in the UK with 1.0 and 1.3 engines, including the 1.5 Sport later on. BC lists BCR-ZF-02 for it under QNC20, with default rates of 4 kg/mm front and rear.

Give the supplier the VIN and engine before ordering.

Daihatsu developed the second-generation Sirion with Toyota, launching it in 2004. It shared its body with the Toyota Passo and Daihatsu Boon in Japan.

It uses struts at the front and a torsion-beam rear. A 1.5-litre Sport model joined the UK range.

Daihatsu left the UK in 2013. Specialists still support the car, but check its condition before fitting new suspension.

Start with your Sirion 2004-2010.

Confirm the chassis, year and existing suspension before choosing your setup.

White second-generation Daihatsu Sirion on silver wheels on a town street

1.0 and 1.3

BC lists BCR-ZF-02 for the 2004-2010 Sirion. Give the supplier the VIN and engine, and ask it to confirm the kit.

Check my Sirion
Red second-generation Daihatsu Sirion outside a modern workshop

1.5 Sport

Tell the supplier if the car is a 1.5 Sport, and ask BC to confirm the kit for that engine.

Check my Sirion Sport
Yellow Daihatsu Sirion by a seafront road

Toyota Passo and Daihatsu Boon

The Japanese-market Passo and Boon share the body. Ask BC before ordering for one of those cars.

Check my Passo or Boon

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZF-02, subject to an application check

BC lists BCR-ZF-02 for the Sirion. Have the application checked before ordering.

Read the buying advice

BCR-ZF-02 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.

  • Confirm the engine and build date
  • Leave room for suspension movement
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches at the new height.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Sirion

A light car on small wheels needs its travel. Keep the drop modest.

Read the buying advice

Agree a height that clears speed humps and kerbs, and check clearance with your wheels through full steering lock. Set the alignment last.

  • Keep clearance for humps
  • Check wheel clearance
  • Set alignment last
Discuss my Sirion

Know how the rear beam works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Daihatsu Sirion, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Sirion has a torsion-beam rear axle with the spring mounted separately from the damper. BC lists default rates of 4 kg/mm front and 4 kg/mm rear; the springs sit in different positions, so the figures are not a direct comparison of stiffness at the wheel.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height and ask a specialist if they need correcting.

Read about ride height and spring preload
Silver second-generation Daihatsu Sirion standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the engine

Check from the VIN which engine the car has, especially if it is a 1.5 Sport.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Sirion 2004-2010 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-ZF-02 is listed for the 2004-2010 Sirion under QNC20. It has 30-way rebound adjustment and default rates of 4 kg/mm front and 4 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.

View BC Racing Sirion 2004-2010 kits

Find your Sirion 2004-2010 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Sirion 2004-2010 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Sirion 2004-2010 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and build date.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Daihatsu Sirion 2004-2010 coilovers.

Check the details before choosing your kit.

Does it fit the first-generation Sirion?

No. The 1998-2004 Sirion has its own BC reference, BCR-ZF-03.

Does it fit a Toyota Passo?

The Passo shares the body. Ask BC to confirm it before ordering.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Sirion. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Sirion's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.