
Daihatsu Thor M900S / Toyota Roomy.
The coilover guide.
Shop the coiloversTEIN lists one FLEX Z kit for the Thor and its Toyota twins, for Japanese-market cars only. Confirm the market and grade, then stay within TEIN's recommended heights.
Daihatsu Thor history
The Daihatsu Thor and Toyota Roomy and Tank are the same compact tall MPV, built by Daihatsu from 2016 with sliding rear doors and a 1.0-litre engine. TEIN lists FLEX Z VSTE4-C1AS3 for the Thor Custom M900S and the Toyota Roomy and Tank M900A.
TEIN's listing is for Japanese-market cars only. A UK registration does not by itself confirm the car's original specification.
Daihatsu launched the Thor in November 2016 and built it alongside the Toyota Roomy and Tank and the Subaru Justy. All share a boxy body with sliding rear doors and a 1.0-litre engine, turbocharged on some grades.
The Custom versions add a bolder grille and trim. TEIN's listing names the Thor Custom G, G SA II and G Turbo SA II grades.
UK cars are imports. Confirm the original market, grade and build date from the chassis number.
Start with your Thor M900S / Toyota Roomy.
Match the model year, drivetrain and body style before comparing brands.

Daihatsu Thor Custom
TEIN lists VSTE4-C1AS3 for the Thor Custom M900S from November 2016 to August 2020, front-drive, 1.0-litre G, G SA II and G Turbo SA II grades. Give the supplier the chassis number and grade.
Check my Thor
Toyota Roomy and Tank
TEIN lists the same kit for the Toyota Roomy and Tank M900A, including the 2020-on Roomy. BC Racing also lists BCR-C-151 for the Toyota Roomy from 2016 under M900A, at 4 kg/mm front and 3.5 kg/mm rear. Give the supplier the chassis number and grade.
Check my Roomy
Non-Custom Thor and four-wheel drive
TEIN's Daihatsu row names the Thor Custom. Ask the supplier before ordering for a standard Thor or a four-wheel-drive car.
Check my standard ThorChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
TEIN lists VSTE4-C1AS3 for the Thor Custom M900S and Toyota Roomy and Tank M900A, Japanese-market cars only.
Read the buying advice
FLEX Z has 16-level damping adjustment that changes compression and rebound together. For the Thor Custom, TEIN recommends 20-40 mm of front and 30-45 mm of rear lowering, with a reference setting of 30 mm front and 35 mm rear. Stay within the recommended range.
- Confirm the engine and build date
- Leave room for suspension movement
- Include alignment
BC Racing lists BCR-C-151 for the Toyota Roomy M900A. Confirm the car first.
Read the buying advice
BCR-C-151 is a possible starting point for a Roomy once the supplier has confirmed fitment. It has 30-way damping adjustment and height set separately from spring preload. Ask the supplier before using it on a Thor.
- Confirm M900A
- Keep the drop modest
- Include alignment
TEIN gives recommended and maximum height ranges. Use the recommended range.
Read the buying advice
The maximum range describes mechanical travel, not a recommended setting. Set the height within TEIN's recommended range, keep enough travel for the car loaded, and set the alignment last.
- Use the recommended range
- Keep travel when loaded
- Set alignment last
Know how the suspension is set
On a standard Daihatsu Thor, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.TEIN lists a rubber front upper mount and reuses the original rear upper mount. Its listed rates for the Thor Custom are 4 kgf/mm front and 3.3 kgf/mm rear.
The car has a torsion-beam rear axle, so check the rear alignment readings at the final height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the market and grade
Check the chassis number to confirm the car is a Japanese-market Thor Custom or Roomy/Tank and which grade it is.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Thor M900S / Toyota Roomy range.
Compare the controls and hardware included in each range.
VSTE4-C1AS3 is listed for the Daihatsu Thor Custom M900S from November 2016 to August 2020 and the Toyota Roomy and Tank M900A, Japanese-market cars only. FLEX Z has 16-level damping adjustment. For the Thor Custom, TEIN recommends 20-40 mm front and 30-45 mm rear lowering and lists 4 kgf/mm front and 3.3 kgf/mm rear springs.
View TEIN Thor M900S / Toyota Roomy kitsBCR-C-151 is listed for the Toyota Roomy from 2016 under M900A, at 4 kg/mm front and 3.5 kg/mm rear, with 30-way damping adjustment. BC lists it under Toyota, so ask the supplier before using it on a Daihatsu Thor.
View BC Racing Thor M900S / Toyota Roomy kitsFind your Thor M900S / Toyota Roomy coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All Thor M900S / Toyota Roomy applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

TEIN · VSTE4-C1AS3
TEIN FLEX Z Coilovers for Toyota Tank M900A / Toyota Tank Custom M900A / Toyota Roomy M900A / Toyota Roomy Custom M900A / Daihatsu Thor Custom M900S (Japanese-market imports) - VSTE4-C1AS3
Check the exact application
![BC Racing Coilovers - Toyota Roomy (16+) [M900A]](/images/9c1ba2358f3b4e-480.webp)
BC Racing · BCR-C-151
BC Racing Coilovers - Toyota Roomy (16+) [M900A]
Check the exact application
All Thor M900S / Toyota Roomy kit links and part numbers
Before you order.
Identify your car
Send the chassis number, grade and build date, and confirm the original market.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Daihatsu Thor M900S / Toyota Roomy coilovers.
Check the details before choosing your kit.
Does it fit a Toyota Roomy?
TEIN lists the same kit for the Toyota Roomy and Tank M900A. Confirm the grade.
How low should I go?
TEIN recommends 20-40 mm front and 30-45 mm rear lowering for the Thor Custom. Stay within that range.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Thor's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.




