Orange Dodge Challenger R/T coupe on dark wheels in a Peak District lay-by

Dodge Challenger 2008-2023.
The coilover guide.

Shop the coilovers

Nitron lists six Challenger kits, from RoadSport to R3, including elec-TRON versions with electronically controlled damping. Confirm the engine and version first.

Which Challenger 2008-2023 do you have?6 listed kits · 1 brandReviewed 21 November 2026

Dodge Challenger history

The third-generation Challenger ran from 2008 to 2023 as a retro two-door muscle car, with V6 and Hemi V8 engines up to the supercharged Hellcat. Nitron lists RoadSport, R1 and R3 kits for the 5.7, 6.4 and 6.4 SRT versions.

Each also comes as an elec-TRON version, Nitron's electronically controlled damping system. Nitron notes that the elec-TRON kits need the DSC Sport control unit.

Dodge revived the Challenger name in 2008 with styling based on the 1970 original, on a rear-drive platform shared with the Charger and Chrysler 300.

Versions ranged from the 3.6-litre V6 to the R/T, Scat Pack, SRT 392 and supercharged Hellcat and Demon. Later high-performance cars gained adaptive dampers, and an all-wheel-drive GT was added.

Production ended in 2023. UK cars are imports, so confirm the version and damper type from the VIN.

Start with your Challenger 2008-2023.

Confirm the chassis, year and existing suspension before choosing your setup.

Black Dodge Challenger on silver wheels on a country lane

5.7 and 6.4 Hemi

Nitron lists RoadSport, R1 and R3 kits for the Challenger 5.7, 6.4 and 6.4 SRT. Give the supplier the VIN, engine and drivetrain, and mention any existing adaptive dampers.

Check my Challenger
Grey Dodge Challenger SRT in a circuit paddock

elec-TRON electronic damping

Nitron's elec-TRON RoadSport, R1 and R3 kits use electronically controlled damping and need the DSC Sport control unit. Confirm the control interface and any extra hardware with Nitron.

Ask about elec-TRON
Orange Dodge Challenger R/T in a Peak District lay-by

V6, Hellcat, AWD and widebody

Nitron's listing names the 5.7, 6.4 and 6.4 SRT. Ask the supplier before ordering for a V6, Hellcat, all-wheel-drive GT or widebody.

Check my GT or widebody

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron's RoadSport kits suit road driving. Confirm the version and damper type first.

Read the buying advice

RoadSport is Nitron's road kit. Agree the spring rates and height with Nitron for the car's weight and wheels, keep the drop modest, and include alignment. The elec-TRON version adds electronically controlled damping.

  • Confirm the engine
  • Keep the drop modest
  • Include alignment
Discuss a RoadSport kit for my Challenger

R1 adds a combined damping adjuster for road and occasional track use.

Read the buying advice

R1 lets you change the damping with one adjuster. Agree rates and settings with Nitron, and confirm delivery timing before booking fitting.

  • Confirm the engine
  • Agree rates
  • Confirm delivery timing
Discuss an R1 kit for my Challenger

R3 has separate rebound and compression controls for serious track use.

Read the buying advice

R3 lets you set rebound and both compression speeds separately. Agree rates, valving and starting settings with Nitron for your tyres and events, and confirm delivery timing.

  • Confirm the engine
  • Agree rates and valving
  • Confirm delivery timing
Discuss an R3 kit for my Challenger

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Dodge Challenger, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Challenger has double-wishbone-type front suspension and a multi-link rear with the spring separate from the damper. Nitron supplies its kits for this layout.

Check the alignment at the final ride height.

Read about ride height and spring preload
Blue Dodge Challenger standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the engine and version

Check the VIN to confirm the engine, version and drivetrain, and note any existing adaptive dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Challenger 2008-2023 range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists RoadSport, R1 and R3 kits for the Challenger 5.7, 6.4 and 6.4 SRT, each also as an elec-TRON version with electronically controlled damping that needs the DSC Sport control unit. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron Challenger 2008-2023 kits

Find your Challenger 2008-2023 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

6 listings

Selected application: All Challenger 2008-2023 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Challenger 2008-2023 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, version and drivetrain.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Dodge Challenger 2008-2023 coilovers.

Check the details before choosing your kit.

What is elec-TRON?

Nitron's electronically controlled damping. Nitron notes the Challenger kits need the DSC Sport control unit; confirm the hardware before ordering.

Is there a BC Racing kit?

Not in this catalogue. Nitron's kits are the listed options for the Challenger.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Challenger. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Challenger's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.